GREENWORKS

GD24IW400 - Drill GREENWORKS - Free user manual and instructions

Name: GD24IW400
Brand: GREENWORKS
Rating: 7 (247 reviews)

Find the device manual for free GD24IW400 GREENWORKS in PDF.

📄 112 pages

EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs

View the manual :

Pick your language and provide your email: we'll send you a specifically translated version.

This manual is not available in your language

Desired language Your email address

Product type	Cordless drill-driver
Brand	Greenworks
Model	GD24IW400
Rated voltage	24 V
Battery type	Lithium-Ion
Battery capacity	2.0 Ah (standard)
Chuck type	Keyless, 10 mm
No-load speed (speed 1)	0 - 500 rpm
No-load speed (speed 2)	0 - 2000 rpm
Maximum torque	40 Nm
Number of torque positions	18+1
Hammer function	No
Lighting	Integrated LED
Weight (with battery)	1.2 kg
Dimensions (L x H x W)	200 x 200 x 60 mm
Power supply	24 V battery (not included)
Charger included	No
Sound level	75 dB(A)
Vibration	2.5 m/s²
Maintenance and cleaning	Clean with a dry cloth; do not use solvents
Safety	Trigger lock; do not expose to moisture
Spare parts	Available from Greenworks after-sales service
Repairability	Repairability index on greenworks.fr

Frequently Asked Questions - GD24IW400 GREENWORKS

Which battery is compatible with the Greenworks GD24IW400 drill?

This drill is compatible with all batteries from the Greenworks 24V range (models G24B2, G24B4, etc.).

How do I change the chuck of the GD24IW400?

The chuck is quick-change: turn the chuck ring counterclockwise to open, insert the bit or drill, then tighten by hand.

Can I use this drill as a screwdriver?

Yes, it has an 18+1 position clutch that allows you to adjust the torque for screwing without damaging materials.

What should I do if the drill does not start?

Check that the battery is charged and correctly inserted. If the problem persists, test with another battery. Consult the manual for troubleshooting.

How do I maintain the drill?

Clean the tool regularly with a dry cloth. Avoid moisture and solvents. The ventilation openings must remain clear.

Does the drill have a hammer function?

No, the GD24IW400 model is a hammerless drill-driver. For drilling into masonry, use a suitable bit on a reduced speed mode.

What is the maximum speed of the tool?

The drill offers two speed ranges: 0-500 rpm (high torque) and 0-2000 rpm (high speed).

Where can I find spare parts for the GD24IW400?

Spare parts are available from the Greenworks after-sales service or on their website. Contact them to order.

How do I adjust the screwing torque?

Turn the torque adjustment ring located behind the chuck. The numbers (1-18) correspond to increasing torques; the drill mode is marked with a drill bit.

Is the battery included with the tool?

No, the drill is sold bare (without battery or charger). You can purchase a kit with battery and charger separately.

User questions about GD24IW400 GREENWORKS

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

No questions yet. Be the first to ask one.

Download the instructions for your Drill in PDF format for free! Find your manual GD24IW400 - GREENWORKS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GD24IW400 by GREENWORKS.

USER MANUAL GD24IW400 GREENWORKS

natural_image

3D rendered illustration of a power drill with visible screw and base (no text or symbols)

IWD401

Original Instructions / Übersetzung der Originalanweisungen / Traducción de las instrucciones originales / Traduzione delle istruzioni originali / Traduction des instructions d'origine / Traduzido a partir das instruções originais / Vertaling van de originele gebruiksaanwijzing / Перевод оригинальных инструкций / Alkuperäisten ohjeiden käännös / Översättning av originalinstruktionema / Produsentens instruksjoner / Oversættelse af de originale vejledninger / Tlumaczenie oryginalnej instrukcji / Překlad originálního návodu / Preklad originálneho návodu / Prevod originalnih navodil / Prijevod izvornih uputa / Az eredeti utasítás fordítása / Traducere a instructiunilor originale / Превод на оригиналните инструкции / Авθεντικές odηγίες / ترجمة التعليمات الأصلية / Orijinal Talimatların Tercümesi / DIXI 1900 / Originalių instrukciju vertimas / Instrukciju tulkojums no originalāvalodas / Originaalkasutusjuhendi tõlge

English

1 Description......4

1.1 Purpose.... 4
1.2 Overview.... 4

2 Safety...... 4

3 Installation...... 4

3.1 Unpack the machine.... 4
3.2 Install the battery pack....4
3.3 Remove the battery pack.... 4

4 Operation.... 4

4.1 Start the machine.... 4

4.2 Stop the machine.... 4
4.3 LED light.... 4
4.4 Speed selection.... 5
4.5 Adjust the reversing button....5

5 Maintenance....5

5.1 Clean the machine.... 5

6 Technical data....5

7 Warranty....5

8 EC Declaration of conformity......6

1 DESCRIPTION

1.1 PURPOSE

The machine is intended for driving in and loosening screws and bolts as well as for tightening and loosening nuts within the respective range of dimension.

1.2 OVERVIEW

Figure 1.

1 1/2" Drive (Coupler)

4 Speed Selection

2 LED work Light

5 Reversing button

3 Switch trigger

2 SAFETY

WARNING

Make sure that you do/obey all safety instructions.

Refer to Safety Manual.

3 INSTALLATION

3.1 UNPACK THE MACHINE

WARNING

Make sure that you correctly assemble the machine before use.

WARNING

If the parts are damaged, do not use the machine.
If you do not have all the parts, do not operate the machine.
If the parts are damaged or missing, speak to the service center.
Open the package.
Read the documentation in the box.
Remove all the unassembled parts from the box.
Remove the machine from the box.
Discard the box and package in compliance with local regulations.

3.2 INSTALL THE BATTERY PACK

Figure 2.

WARNING

If the battery pack or charger is damaged, replace the battery pack or the charger.
Stop the machine and wait until the motor stops before you install or remove the battery pack.
Read, know, and do the instructions in the battery and charger manual.
Align the lift ribs on the battery pack with the grooves in the battery compartment.
Push the battery pack into the battery compartment until the battery pack locks into place.
When you hear a click, the battery pack is installed.

3.3 REMOVE THE BATTERY PACK

Figure 2.

Push and hold the battery release button.
Remove the battery pack from the machine.

4 OPERATION

WARNING

Always wear eye protection.

WARNING

Do not use any attachments or accessories not recommended by the manufacturer of this product.

4.1 START THE MACHINE

Figure 3.

i NOTE

The machine can not work until the reversing button is pushed fully to the left or right. Do not operate the machine at low speeds for extended periods of time.

Push the switch trigger to turn the machine ON (I).

4.2 STOP THE MACHINE

Figure 3.

Release the switch trigger to turn the machine OFF (O).

WARNING

Release the switch trigger and let the coupler to come to a complete stop.

4.3 LED LIGHT

Figure 4

The LED light illuminates when the trigger is depressed.

It provides extra light for increased visibility.

4.4 SPEED SELECTION

Push the button (1) to adjust the speed. The lights (2) will illuminate according to the speed level.

Figure 5.

Lights Speed level
3 Green Lights The machine is in "high speed" setting.
2 Green Lights	The machine is in "medium speed" setting.
1 Green Light The machine is in "low speed" setting.

4.5 ADJUST THE REVERSING BUTTON

The machine has the reversing button (forward/reverse lock) above the switch trigger to change the direction of the bit.

Figure 6.

When the reversing button is on the left side of the switch trigger, the bit direciton is forward.
When the reversing button is on the right side of the switch trigger, the bit direction is reversible.
Put the direction button in the OFF (center lock) position to help decrease the possibility of accidental start when not operate.

WARNING

Release the switch trigger and let the chuck to come to a complete stop to stop the mahcine.

WARNING

Let the chuck to come to a complete stop before changing the direction of rotation.

i NOTE

The machine does not operate until the direction button is pushed fully to the left or right.

5 MAINTENANCE

CAUTION

Do not let brake fluids, gasoline, petroleum-based materials touch the plastic parts. Chemicals can cause damage to the plastic, and make the plastic unserviceable.

CAUTION

Do not use strong solvents or detergents on the plastic housing or components.

WARNING

Remove the battery pack from the machine before maintenance.

5.1 CLEAN THE MACHINE

CAUTION

The machine must be dry. Humidity can cause risks of electrical shocks.

Clear the unwanted material out of the air vent with a vacuum cleaner.
Do not spray the air vent or put the air vent in solvents.
Clean the housing and the plastic components with a moist and soft cloth.

6 TECHNICAL DATA

Rated Voltage 24 V
No Load Speed 0 - 2800 min	-1
Impact rate 0 - 4000 min	-1
Max torque 400 Nm
Weight with battery 1.19 kg
Battery model G24B2/G24B4	and other BAG series
Charger model	2913907 and other CAG series
Measured sound pressure level	84.3dB(A), K_pA = 3 dB(A)
Measured sound power level	95.3 dB(A), K_wA = 3 dB(A)
Vibration level	< 2.5 m/s ^2 , K = 1.5 m/s ^2

The recommended ambient temperature range:

Item	Temperature
Appliance storage temperature range	32°F (0°C) - 113°F (45°C)
Appliance operation temperature range	32°F (0°C) - 113°F (45°C)
Battery charging temperature range	39°F (4°C) - 104°F (40°C)
Charger operation temperature range	39°F (4°C) - 104°F (40°C)
Battery storage temperature range	32°F (0°C) - 113°F (45°C)
Battery discharging temperature range	32°F (0°C) - 113°F (45°C)

7 WARRANTY

(The full warranty terms and conditions can be found on Greenworks webpage)

The Greenworks warranty is 3 years on the product, and 2 years on batteries (consumer/private usage) from the date of

purchase. This warranty covers manufacturing faults. A faulty product under warranty might be either repaired or replaced.

A unit that has been misused or used in other ways then described in the owner's manual might be rejected for warranty. Normal wear, and wear parts are not considered as warranty. The original manufacturer warranty is not affected by any additional warranty offered by a dealer or retailer.

A faulty product must be returned to the point of purchase in order to claim for warranty, together with the proof of purchase (receipt).

8 EC DECLARATION OF CONFORMITY

Name and address of the manufacturer:

Name: GLOBGRO AB

Globe Group Europe

Address: Riggaregatan 53, 211 13 Malmö, Sweden

Name and address of the person authorised to compile the technical file:

Name: Peter Söderström

Address: Riggaregatan 53, 211 13 Malmö, Sweden

Herewith we declare that the product

Category: Impact wrench

Model: IWD401

Serial number: See product rating label

Year of Construction: See product rating label

is in conformity with the relevant provisions of the Machinery Directive 2006/42/EC.
is in conformity with the provisions of the following other EC-Directives:

• 2011/65/EU & (EU)2015/863

• 2014/30/EU

Furthermore, we declare that the following parts, clauses of European harmonised standards have been used:

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Place, date:

Signature: Ted Qu, Quality Director

Malmö, 23.01.2020

Ted Qu

Deutsch

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Name and address of the person authorised to compile the technical file:

Nome: Peter Söderström

Indirizzo: Riggaregatan 53, 211 13 Malmö, Svezia

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

8 EC Declaration of conformity......22

Français

1 DESCRIPTION

1.1 OBJET

8 EC DECLARATION OF CONFORMITY

Name and address of the person authorised to compile the technical file:

Nom : Peter Söderström

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Herewith we declare that the product

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Paikka, päiväys:

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Ort, datum:

Signatur: Ted Qu, Kvali- tetschef

Malmö, 23.01.2020

Ted Qu

Norsk

1 Beskrivelse...... 44

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Sted, dato:

1 1/2" Drev (Kobling)

4 Hastighedsknap

2 LED-arbcjdslys

- EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Sted, dato:

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Place, date: 23.01.2020

Signature: Ted Qu, Quality Director

Ted Qu

Slovenčina

1 Popis.... 60

1.1 Účel....60
1.2 Prehl'ad....60

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Miesto, dátum:

Malmö, 23.01.2020

Podpis: Ted Qu, riaditel' pre kvalitu

Ted Qu

Slovenščina

1 Opis....64

1.1 Namen....64
1.2 Pregled....64

2 Varnost.... 64

3 Namestitev....64

3.1 Razpakiranje naprave.... 64
3.2 Namestitev akumulatorja....64
3.3 Odstranite akumulator.... 64

4 Delovanje....64

4.1 Zagon naprave.... 64

4.2 Zaustavitev naprave....64
4.3 Lučka LED.... 64
4.4 Izbira hitrosti....64
4.5 Nastavitev gumba za obratno vrtenje...... 65

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Kraj, datum:

Podpis: Ted Qu, direktor kakovosti

Malmö, 23.01.2020

Ted Qu

Hrvatski

1 Opis....68

1.1 Svrha....68
1.2 Pregled....68

2 Sigurnost.... 68

3 Ugradnja.... 68

3.1 Vađenje stroja iz ambalaže.... 68
3.2 Umetnite bateriju.... 68
3.3 Uklonite baterijski modul.... 68

4 Rukovanje...... 68

4.1 Pokrenite stroj....68

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Mjesto, datum

Malmö, 23.01.2020

Potpis: Ted Qu, direktor za kvalitetu

Ted Qu

Magyar

1 Leírás....72

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC

62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Yer, tarih:

IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC

62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Vieta, data:

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Name and address of the person authorised to compile the technical file:

Nimi: Peter Söderström

Aadress: Riggaregatan 53, 211 13 Malmö, Rootsi

Käesolevaga kinnitame, et toode

Liik: Löökmutrikeeraja

Mudel: IWD401

Seerianumber: Vt. toote andmesilti

• EN 62841-1; EN 62841-2-2; EN 55014-1; EN 55014-2; IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC 62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8

Koht, kuupäev: