SNT1011 - Network card Sveon - Free user manual and instructions
Find the device manual for free SNT1011 Sveon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Interface Card |
| Model | SNT1011 |
| Brand | Sveon |
| Form Factor | Standard PCIe (estimated) |
| Dimensions (approx.) | 120 mm x 65 mm (standard bracket) |
| Weight (approx.) | 50 g |
| Power Supply | Powered via PCIe slot (3.3V / 12V) |
| Network Interface | Ethernet RJ-45 |
| Supported Speeds | 10/100/1000 Mbps (Gigabit Ethernet) |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
| Operating Temperature | 0°C to 55°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Main Functions | Wired network connectivity, data transfer, Wake-on-LAN support |
| LED Indicators | Link/Activity, Speed |
| Maintenance | Keep dry and dust-free; clean contacts with isopropyl alcohol if needed |
| Safety Precautions | Handle with care to avoid ESD; install in anti-static environment |
| Spare Parts / Repairability | Not applicable (integrated circuit); replace entire card if defective |
| General Information | User manual available in PDF on notice-facile.com |
Frequently Asked Questions - SNT1011 Sveon
How do I install the SNT1011 network card?
Power off your computer, open the case, insert the card into an available PCIe slot, secure it with a screw, close the case, and power on. Install drivers if prompted.
Is the SNT1011 compatible with Windows 10?
Yes, the SNT1011 is compatible with Windows 10, 8, 7, and also Linux distributions. Drivers are included on the installation CD or can be downloaded from the Sveon website.
What speed does the SNT1011 support?
The SNT1011 supports 10/100/1000 Mbps (Gigabit Ethernet) speeds, automatically negotiating the highest common speed with your network equipment.
Does the SNT1011 support Wake-on-LAN?
Yes, the SNT1011 supports Wake-on-LAN. You need to enable it in the card's properties in Device Manager and configure the BIOS accordingly.
Why is my SNT1011 not detected?
Ensure the card is properly seated in the PCIe slot. Try a different slot if available. Check if the card is recognized in Device Manager under 'Network adapters'. If not, update drivers or check BIOS settings.
Can I use the SNT1011 in a PCIe x1 slot?
Yes, the SNT1011 is designed for PCIe x1 slots, but it can also be installed in larger PCIe slots (x4, x8, x16) as they are backward compatible.
Does the SNT1011 come with a low-profile bracket?
Some versions may include a low-profile bracket. Check the package contents. If not, a low-profile bracket can be purchased separately.
How do I update the drivers for the SNT1011?
Download the latest drivers from the Sveon support website. Uninstall the current driver from Device Manager, reboot, and install the new one. Alternatively, use Windows Update.
What do the LEDs on the SNT1011 indicate?
Typically, one LED indicates link/activity (blinking when data is transferred) and another indicates speed (e.g., green for 1000 Mbps, orange for 100 Mbps). Consult the manual for exact behavior.
Is the SNT1011 compatible with Linux?
Yes, the SNT1011 uses standard Realtek chipsets (RTL8111 series), which are well-supported by the Linux kernel. It should work out of the box with most distributions.
User questions about SNT1011 Sveon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual SNT1011 - Sveon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SNT1011 by Sveon.