Question 1

How to assemble the Princess Easy Fryer?

Accepted Answer

Before you start assembling your Princess Easy Fryer, make sure that the power plug is always unplugged from the wall outlet. This classic oil appliance has a power of 2,000 W and is designed to fry efficiently with its 3-liter capacity and a maximum temperature of 190 °C. Place the fryer on a flat and stable surface, near a power outlet, ensuring that it has sufficient clearance for heat to dissipate properly.

Assemble the components in the following order: First, place the removable stainless steel bowl (6) into the appliance, then insert the anti-splash safety filter (7) at the bottom of this bowl. The filter plays a crucial role in reducing splashes and preserving the quality of the oil thanks to the cold zone. Next, mount the electronic control unit (5) equipped with the adjustable thermostat knob and the heating indicator into the body of the appliance.

Continue with the removable frying basket: first, assemble the detachable handle (9) onto the basket (8), then place the whole assembly into the removable bowl. Finally, reposition the hinged lid (10) on the appliance. You will see that there is a built-in cord winder under the appliance for easy storage of the power cable.

Before the first use, fill the removable bowl with oil or liquid fat, strictly adhering to the level indicated between the minimum and maximum markers on the bowl (see fig. B of the manual). This step is essential: the appliance will not function properly if the level is incorrect. Replace the lid.

You can now make your first start. Insert the power plug into the wall outlet and turn the thermostat knob (1) to the desired temperature up to a maximum of 190 °C. The power indicator (2) lights up, and the temperature indicator (3) remains lit during the heating phase. Once the oil or liquid fat reaches the required temperature, this same indicator goes out, indicating that the appliance is ready. Congratulations! Your Princess Easy Fryer is now assembled and operational.

Question 2

How can I prevent the PRINCESS Caffè Italiano OneTouch 242124 coffee machine from staying off the next day without being able to turn it on without unplugging it? Is there a reset procedure or a button code to solve this problem?

Accepted Answer

If your PRINCESS Caffè Italiano OneTouch 242124 coffee machine does not turn on the next day by simply pressing the button and you have to consistently unplug it to restart it, here are some tips to avoid this problem and reset the device:

1. Check the power supply

Make sure the electrical outlet is working properly and that the machine is plugged in correctly.
Avoid using power strips or extension cords that could cause intermittent power cuts.

2. Reset the machine

The machine does not have a specific button code for a reset, but a complete restart can be performed:
Unplug the machine from the electrical outlet.
Wait at least 5 minutes to allow the electronics to fully reset.
Plug the machine back in and try to turn it on normally.

3. Check usage conditions

If the machine has been left on or in standby mode, this may cause an electronic lock-up. Always turn off the machine via the button before unplugging it.
Ensure that the water tank is properly in place and filled, as some machines refuse to start without water.

4. Cleaning and maintenance

A buildup of limescale or residues can cause malfunctions. Regularly descale according to the manufacturer's recommendations.
Clean the filters and nozzles to avoid blockages.

5. In case of persistent problems

If after these steps the machine still does not turn on without unplugging, it may be an electronic fault requiring professional repair. Contact PRINCESS customer service or an authorized repair center.

User manual PRINCESS : user manuals and guides in PDF

Models PRINCESS most viewed

Browse manuals PRINCESS by appliance type

Recent questions about devices PRINCESS