Question 1

How to check and maintain the lock of the door of the WANDERS KANDA 85 fireplace insert?

Accepted Answer

The lock of your WANDERS KANDA 85 insert door is an essential component that must be kept in good working order. According to the technical manual, regular maintenance of this mechanism is simple but crucial to ensure a tight closure and optimal safety.

Regular lubrication: The main maintenance point is to regularly oil the hinges and the door lock. This operation should be performed from time to time, especially before the heating season and periodically during its use. Apply a suitable lubricant (preferably dry lubricant or silicone-based) directly on the lock joints and hinges. This lubrication prevents sticking and ensures smooth closure.

Cleaning the mechanisms: When cleaning the stove, remove any ash and soot residues that may accumulate around the lock area. Use a soft, damp cloth to clean this area. Important: never use aggressive or abrasive detergents for the maintenance of your stove, as they could damage the locking mechanism and the sealing joints.

Checking the sealing: Once a year (preferably before the winter season), have the door and glass seals checked to ensure they are in good condition and that the lock keeps the door perfectly closed. A defective seal would compromise the chimney draft and make the fireplace less efficient.

Closure test: Regularly operate the lock to check its proper functioning. The door should close without force and remain securely locked. This check is even more important as the door must be closed during combustion to ensure optimal efficiency and avoid draft problems.

Regular maintenance of this lock ensures the safety, sealing, and proper functioning of your fireplace. In case of a stuck or defective lock despite maintenance, consult a professional specialized in closed fireplaces.

Question 2

How do I disassemble the door of the WANDERS KANDA 85 stove?

Accepted Answer

To disassemble the door of your WANDERS KANDA 85 stove, follow these steps:

Preparation: Ensure that the stove is completely turned off and cooled down before starting. Allow it to cool for at least 1 to 2 hours after the last fire to avoid any risk of burns. Also, prepare a clear and clean workspace where you can place the door without damaging it.

Disassembling the door: Locate the screws or fasteners that hold the door on the hinges (usually located on the sides of the door). Using a suitable screwdriver, carefully unscrew these screws while keeping them safe – you will need them for reassembly. Hold the door firmly with your other hand and gently lift it to detach it from the hinges, without forcing it to avoid damaging the components or the glass.

Handling the door: Place the door on a soft surface (a cloth or blanket) to avoid scratching the ceramic glass or the steel structure. The KANDA 85 model is equipped with heat-resistant ceramic glass, so handle it with care.

Reassembling the door: To reassemble the door, realign it correctly with the hinges and screw the screws back in, ensuring they are tight but without excessive force. Test the opening and closing of the door to ensure proper functioning. Remember to regularly oil the hinges and the lock with suitable oil to ensure proper mechanical operation and prevent corrosion.

User manual WANDERS : user manuals and guides in PDF

Models WANDERS most viewed

Browse manuals WANDERS by appliance type

Recent questions about devices WANDERS