Q: How to use and program the LIVOO PET100 pet feeder?

Quick start: Power the device using a USB Type-C adapter (5V/1A) or 3 LR20 batteries Press the power button located under the base of the device Download the "TUYA Smart" app (iOS 8.0+ or Android 4.3+) Create an account, enable Bluetooth, and let the app detect the feeder Enter your Wi-Fi credentials to complete the connection Program meals: Open the "Meal Plan" section in the app Select the desired feeding time Choose the days of the week Set the portion amount (1 to 12 portions, approximately 7-12g per portion) Manual controls: Dispense a portion: briefly press the button Record a voice message: hold the button for a maximum of 10 seconds Delete the recording: briefly press the recording button Lock/unlock: hold the button until you see two red flashes LED indicators: Fast blue: connected to the network Slow blue: waiting for connection Flashing red: motor malfunction - unplug and try again

Q: Do I need to add water for cooling the LIVOO DOM511?

No, you do not need to add water for cooling the LIVOO DOM511. This beer dispenser is equipped with a built-in compressor that automatically ensures cooling. Here’s how it works: The dispenser cools to a temperature between 2 °C and 8 °C thanks to the compressor. After plugging it in (230V/50Hz), wait 2 to 4 hours for the optimal temperature to be reached before pouring your first beer. No water filling is necessary - the system operates autonomously. Note: The drain located at the bottom of the device is not for water filling. It allows for the evacuation of condensate that naturally forms during cooling, and facilitates cleaning of the circuit after use.

Q: How to pair two LIVOO TES273 speakers together?

Yes, the LIVOO TES273 speaker has a TWS (True Wireless Stereo) function that allows you to pair two speakers together for synchronized playback. How to pair two TES273 speakers You can pair two TES273 speakers using three methods: Via Bluetooth V5.3 - Activate the TWS mode on both speakers and they will automatically synchronize Via USB - Connect the two devices with a USB cable for wired pairing Via TF card (microSD) - Insert the same TF card into both speakers for playback The TWS mode is accessible directly from the touch menu of the speaker. Once the two units are paired, audio will be played synchronously on both devices, providing better sound coverage or stereo depending on your setup.

Q: How to position the rack in the LIVOO DOC345 fryer?

The rack must be placed inside the basket of your LIVOO DOC345 fryer, not on top. Steps to place the rack: Ensure that the rack is properly positioned in the basket before use Place the food on top of the rack Insert the complete basket (with rack and food) into the fryer Important: Never use the basket without the rack. It is integral to the system and ensures even heat distribution during cooking. The rack and the basket always work together as a complete unit. When removing after cooking, handle it carefully as the rack and food are hot.

Question 1

How to use and program the LIVOO PET100 pet feeder?

Accepted Answer

Quick start:

Power the device using a USB Type-C adapter (5V/1A) or 3 LR20 batteries
Press the power button located under the base of the device
Download the "TUYA Smart" app (iOS 8.0+ or Android 4.3+)
Create an account, enable Bluetooth, and let the app detect the feeder
Enter your Wi-Fi credentials to complete the connection

Program meals:

Open the "Meal Plan" section in the app
Select the desired feeding time
Choose the days of the week
Set the portion amount (1 to 12 portions, approximately 7-12g per portion)

Manual controls:

Dispense a portion: briefly press the button
Record a voice message: hold the button for a maximum of 10 seconds
Delete the recording: briefly press the recording button
Lock/unlock: hold the button until you see two red flashes

LED indicators:

Fast blue: connected to the network
Slow blue: waiting for connection
Flashing red: motor malfunction - unplug and try again

Question 2

What is the purpose of the drainage on the LIVOO DOM511 beer dispenser?

Accepted Answer

The drainage (small tap located at the bottom of the device) is used to remove the condensation water that naturally accumulates in the cooling tray during operation. This is particularly important during prolonged use.

It also comes into play in two cases:

After cleaning - to drain the rinsing water from the internal circuit after disassembling the keg, tap, and hose
Before long-term storage - to completely empty the device if you are not using it for several weeks or months

To drain, simply place a glass or container under the tap and open it. This is a simple but important maintenance operation to prevent the accumulation of stagnant water and maintain the hygiene of your device.

Question 3

Do I need to add water for cooling the LIVOO DOM511?

Accepted Answer

No, you do not need to add water for cooling the LIVOO DOM511. This beer dispenser is equipped with a built-in compressor that automatically ensures cooling.

Here’s how it works:

The dispenser cools to a temperature between 2 °C and 8 °C thanks to the compressor.
After plugging it in (230V/50Hz), wait 2 to 4 hours for the optimal temperature to be reached before pouring your first beer.
No water filling is necessary - the system operates autonomously.

Note: The drain located at the bottom of the device is not for water filling. It allows for the evacuation of condensate that naturally forms during cooling, and facilitates cleaning of the circuit after use.

Question 4

The LIVOO DOS230 beard trimmer won't turn on even though the light is green - what should I do?

Accepted Answer

The green light does not guarantee a full charge or a functional battery. Here is the procedure to follow:

1. Mandatory full charge

Although the light is green, the 1200 mAh Li-ion battery may be discharged or defective. Perform a full charge:

Connect the supplied USB cable to a 5V 1A adapter (computer, 5V wall charger, etc.)
Charge for at least 1h30 without interruption
Do not use the trimmer while charging - completely disconnect the cable before any attempt

2. Checks after charging

Once charging is complete:

Test turning it on without the cable
The trimmer should operate for at least 90 minutes continuously if the battery is healthy
If the light blinks or remains off after charging, the battery is likely defective

3. In case of failure

The built-in battery is not user-replaceable. Since your trimmer was purchased 3 months ago (warranty period), contact LIVOO for an exchange or repair. Mention that the device has only been used 2 times and that the light comes on but the device does not start.

Question 5

Why does only water come out of the DOD217 coffee machine with the Nespresso holder, without brewing coffee?

Accepted Answer

If only water comes out without brewing coffee, here are the checks to perform on your LIVOO DOD217:

1. Locking handle

Make sure the locking handle is fully lowered after inserting the Nespresso capsule. If it is not properly clipped, the capsule will not be pierced correctly and the water will flow through without passing through the coffee. Listen for or feel the locking "click".

2. Red indicator light

Check that the red light is stable (not blinking). According to the manual, this light blinks during heating and becomes steady when the machine is ready. If you start brewing too early, the flow and pressure may be insufficient to extract the coffee properly.

3. Water level in the tank

Ensure that the tank contains enough water between the MIN and MAX levels. A lack of water reduces pump pressure and prevents coffee extraction.

4. Intensity selector

Check that the water volume selector (levels 1 to 7) is not at the minimum level (1). A level that is too low produces very little coffee. Try starting with a mid-level (4 or 5).

5. Descaling

If all of this is correct, there may be slight clogging even though the machine is new. Perform a descaling with a mixture of 1 part white vinegar to 3 parts water, then let this mixture pass through the machine and rinse well with clear water.

If the problem persists after all these checks, it is likely that there is a manufacturing defect (clogged valve, poorly pierced capsule). Contact customer service with your proof of purchase.

Question 6

Where is the reset button on the LIVOO PET100 and how do I use it?

Accepted Answer

The reset button on the LIVOO PET100 restores the device to its factory settings. To use it, press and hold the reset button until you hear three beeps. The red and blue lights will first stay on, then switch to slow blinking, indicating that the reset is in progress.

Once reset, your pet feeder is ready to be reconfigured from the beginning. This operation is useful if you have forgotten a Wi-Fi password or if you want to restore the initial configuration of the device.

Question 7

How to pair two LIVOO TES273 speakers together?

Accepted Answer

Yes, the LIVOO TES273 speaker has a TWS (True Wireless Stereo) function that allows you to pair two speakers together for synchronized playback.

How to pair two TES273 speakers

You can pair two TES273 speakers using three methods:

Via Bluetooth V5.3 - Activate the TWS mode on both speakers and they will automatically synchronize
Via USB - Connect the two devices with a USB cable for wired pairing
Via TF card (microSD) - Insert the same TF card into both speakers for playback

The TWS mode is accessible directly from the touch menu of the speaker. Once the two units are paired, audio will be played synchronously on both devices, providing better sound coverage or stereo depending on your setup.

Question 8

How to assemble the basket and the grid in the LIVOO DOC345 fryer?

Accepted Answer

To correctly assemble the basket and the grid in your LIVOO DOC345 fryer, follow this procedure:

Step 1: remove the basket — Plug in the device and remove the basket by its handle.
Step 2: place the grid in the basket — Position the removable grid inside the basket (never on top). The grid must be well positioned at the bottom of the basket to ensure the safety distance from the heating elements.
Step 3: add food with oil — Arrange your food on the grid in the recommended quantities. Add a light drizzle of oil to enhance cooking (for example, 500 grams for fresh fries).
Step 4: reinsert the basket into the fryer — Gently slide the complete basket (grid + food) into the locking position.

Essential rule: Never use the basket without the grid. The grid is an essential component that must remain in the basket throughout cooking. It protects your food from direct contact with the heating elements.

During cooking: Halfway through cooking, shake the basket gently to ensure even and consistent cooking.

After cooking: Carefully remove the basket using the handle and wearing heat-resistant gloves, as the basket and grid remain very hot. Empty the food and grid carefully, being aware that steam may escape. Allow the device to cool for at least 30 minutes before cleaning.

Question 9

What is the correct way to position the grid in the LIVOO DOC345 fryer?

Accepted Answer

Yes, there is a correct positioning for the grid. According to the manual, the grid must be placed inside the basket, not on top.

Correct assembly order:

The grid fits into the basket
The food is placed on the grid
The whole assembly (basket + grid + food) is then inserted into the fryer

The manual states: “Never use the basket without the grid”. The grid is therefore a mandatory part and must remain in place during cooking. Halfway through cooking, you can stir the food in the basket for even frying.

Question 10

How to position the rack in the LIVOO DOC345 fryer?

Accepted Answer

The rack must be placed inside the basket of your LIVOO DOC345 fryer, not on top.

Steps to place the rack:

Ensure that the rack is properly positioned in the basket before use
Place the food on top of the rack
Insert the complete basket (with rack and food) into the fryer

Important: Never use the basket without the rack. It is integral to the system and ensures even heat distribution during cooking. The rack and the basket always work together as a complete unit.

When removing after cooking, handle it carefully as the rack and food are hot.

User manual LIVOO : user manuals and guides in PDF

Models LIVOO most viewed

Browse manuals LIVOO by appliance type

Recent questions about devices LIVOO