Why doesn't the light turn on anymore when waking up on the LIVOO AR320 alarm clock and how can it be fixed?

Question

Accepted Answer

If the light no longer turns on when waking up on your LIVOO AR320 alarm clock, several causes may be behind this issue. Here’s how to diagnose and potentially resolve this problem:

1. Check the alarm indicators

Make sure the alarm is activated. The alarm indicators should light up or blink when the alarm is set.
Check that the alarm time is correctly set.
If the alarm sounds but the indicators do not light up, it is possible that the LEDs are faulty.

2. Check the light projection function

The LIVOO AR320 has a light projection function that can be activated with the PRO button. Press it to check if the projection turns on.
Use the buttons to adjust the light intensity if available.
Adjust the sharpness with the knob located on the projector.

3. Adjust the general screen brightness

Use the DIMMER button to increase the screen brightness. Three brightness levels are available.

4. In case of hardware failure

If after all these checks the light still does not turn on, it is likely that the LEDs are faulty. In this case, repair or replacement through customer service is necessary.

User manual LIVOO Alarm Clock : user manuals and guides in PDF

Models LIVOO Alarm Clock most viewed

Other categories LIVOO

Recent questions about Alarm Clock LIVOO