User manual LIVOO Robot vacuum : 2 free PDF user manuals

Q: Why is the indicator light on my LIVOO DOH135 robot vacuum blinking when it is new?

If the indicator light on your LIVOO DOH135 robot vacuum is blinking while the device is new, it may indicate several situations: Possible causes of the blinking light Charging issue: The vacuum may not be properly positioned on its charging station, or the charger may not be functioning correctly. Technical error: An internal malfunction may cause this light signal to indicate a problem. Status indication: Some models use blinking to indicate that the battery is charging or that the device is in standby mode. What to do in case of blinking? Check the vacuum's position: Ensure that it is properly placed on the charging station, with the contacts aligned. Inspect the charger: Check that the cable and adapter are not damaged and that the outlet is working. Restart the device: Turn off the vacuum, wait a few seconds, then turn it back on to see if the blinking persists. Possible reset: If your model allows it, perform a reset according to the product-specific instructions. If after these checks the light continues to blink, it is recommended to contact LIVOO customer service for personalized assistance or consider an exchange if necessary.

Q: Does the green light on the LIVOO DOH135 robot vacuum blink when it is charging?

When the LIVOO DOH135 robot vacuum is charging, the green light does not blink. It remains continuously on to indicate that the device is charging properly. A steady green light means that charging is in progress, while a turned-off light may indicate that the device is not properly connected to the charging station or that the battery is full.