Q: How to check if the GRAEF DA 506 dehydrator reaches the set temperature?

The GRAEF DA 506 dehydrator features a built-in digital display that shows the current temperature of the device in real-time. Unlike other models, you do not need an external thermometer to check if the temperature is correctly reached: the control screen immediately indicates whether the temperature matches the one you have set. To check the temperature at startup, simply turn on the device and consult the digital display. After setting the desired temperature (between 30 and 70 °C), press the START button to confirm: the device will then activate and begin heating until it reaches the defined temperature. The green light will turn on, indicating the start of the dehydration process. Thanks to the Dry Balance technology of the DA 506, you benefit from uniform heat with an accuracy of ±5 °C . This means that the temperature varies very little between the different zones of the device, ensuring even drying of your food. You can therefore trust the digital display: the actual temperature is reliable and corresponds to the one you have set. If you want an additional check, you can place a food thermometer on one of the 6 trays a few minutes after starting. It will confirm that the digital display of the device is correct. However, note that Graef recommends trusting the built-in display, which is calibrated to ensure accuracy. After use, always check that the drying cycle is complete (timer at 00:00) before turning off the device and removing your food.

Question 1

How to remove the knife from the GRAEF SKS 900?

Accepted Answer

Before removing the knife (blade G) from your GRAEF SKS 900, first ensure that the device is turned off and unplugged from the power outlet. This safety step is essential as the blade is extremely sharp and can cause serious injuries.

Knife removal procedure:

Pull the carriage (E) completely towards you to move it away from the blade.
Detach the blade cover (H) by rotating it 45° to the right. You can do this by hand or with a coin (1 euro for example) inserted into the designated slot. Caution: do not force too much, or you risk removing the blade at the same time.
Turn the blade locking mechanism 90° to the right and gently remove the blade (G).

Cleaning after removal:

Clean the inside of the blade with a damp cloth. Never immerse the blade in water or in the dishwasher, as this could lead to rust formation, even on stainless steel (due to food salts like ham or cucumber). Wipe carefully and if necessary use a mild cleaning product. Occasionally, lubricate the gear wheel with a little Graef vaseline (item no. 141842).

Reassembling the knife:

Reverse the order of the steps: first replace the blade in its holder, then install the blade cover by rotating it 45° counterclockwise until it clicks into place and does not fall off. Handle the blade with the utmost care as it is very sharp.

Question 2

What do the red and green indicators mean on the GRAEF DA 506 dehydrator?

Accepted Answer

The GRAEF DA 506 dehydrator is equipped with indicator lights that allow you to monitor the operating status of the device during dehydration.

Green indicator: The green indicator lights up automatically after confirming all temperature and time settings and pressing the START button. This indicates that the device is operating normally and the dehydration process has begun. The heating element is active and maintains the set temperature between 30 and 70 °C according to your settings.

Red indicator: Depending on the model, a red indicator may signal the initial heating or temperature adjustment phase before the device reaches the target temperature. It may also indicate that the device is entering standby mode or preparing to start the dehydration process.

The digital display panel of the GRAEF DA 506 shows you in real-time the current temperature and the remaining dehydration time, which complements the information provided by the indicators. Once the timer reaches 00:00, the dehydration is complete and you can turn off the device.

These visual indicators simplify the use of your dehydrator and allow you to quickly check that the drying process is proceeding correctly.

Question 3

How to check if the GRAEF DA 506 dehydrator reaches the set temperature?

Accepted Answer

The GRAEF DA 506 dehydrator features a built-in digital display that shows the current temperature of the device in real-time. Unlike other models, you do not need an external thermometer to check if the temperature is correctly reached: the control screen immediately indicates whether the temperature matches the one you have set.

To check the temperature at startup, simply turn on the device and consult the digital display. After setting the desired temperature (between 30 and 70 °C), press the START button to confirm: the device will then activate and begin heating until it reaches the defined temperature. The green light will turn on, indicating the start of the dehydration process.

Thanks to the Dry Balance technology of the DA 506, you benefit from uniform heat with an accuracy of ±5 °C. This means that the temperature varies very little between the different zones of the device, ensuring even drying of your food. You can therefore trust the digital display: the actual temperature is reliable and corresponds to the one you have set.

If you want an additional check, you can place a food thermometer on one of the 6 trays a few minutes after starting. It will confirm that the digital display of the device is correct. However, note that Graef recommends trusting the built-in display, which is calibrated to ensure accuracy.

After use, always check that the drying cycle is complete (timer at 00:00) before turning off the device and removing your food.

Question 4

How to fix the power button of the GRAEF MS 701 milk frother that is no longer working?

Accepted Answer

The GRAEF MS 701 milk frother has two control buttons: the upper button for hot preparation (which lights up red when activated) and the lower button for cold preparation. If either of these buttons is unresponsive, here are the steps to diagnose and resolve the issue.

Step 1: Check the power supply
Start by ensuring that the device is properly plugged into a functional electrical outlet. Test the outlet with another device to confirm it is delivering power. Also, check that the power cord is not damaged and is not placed on hot surfaces or sharp edges, as this could affect power transmission.

Step 2: Clean the button
Milk or dirt residues may block the button's operation. Before any intervention, turn off the device and unplug it from the outlet. Gently clean around the affected button with a non-abrasive damp cloth, then dry thoroughly to remove any moisture. Then press the button several times to check if it has regained its normal mobility.

Step 3: Check the LED indicator
When you press a button, an LED indicator should light up as long as the device is functioning. If you do not see any LED illumination after cleaning and several attempts, this may indicate an internal electrical problem. Additionally, visually inspect the button for any cracks, damage, or wear.

In case of persistent malfunction
If none of these steps resolve the issue, the button or internal circuit is likely defective. Never attempt to disassemble the device yourself, as non-compliant repairs can pose significant dangers to the user. Contact Graef customer service directly at +49 2932 9703677 or by email at service@graef.de. Your device is covered by a 2-year manufacturer's warranty covering manufacturing defects, and only a specialized technician or Graef customer service is authorized to perform repairs.

User manual GRAEF : user manuals and guides in PDF

Models GRAEF most viewed

Browse manuals GRAEF by appliance type

Recent questions about devices GRAEF