Question 1

How to add custom ringtones on a Hammer Boost LTE phone?

Accepted Answer

To add custom ringtones to your Hammer Boost LTE phone (model HF2403), it is recommended to install a microSD card in the device, as the internal memory is limited to 200 text messages and does not have enough space for audio files. The phone supports microSD cards up to 64 GB.

Preparing the ringtone: Ensure that your audio file is in a compatible MP3 or WAV format. You can download ringtones from specialized websites or convert your own audio files using an online converter. It is best to use small-sized files (less than 2 MB) to optimize your phone's performance.

Transferring the ringtone: Connect your Hammer Boost LTE to your computer using a USB cable. Once recognized, navigate through the phone's directory and locate the Ringtones folder on the microSD card. If this folder does not exist, create it manually. Copy your audio file into this folder, then safely eject the phone.

Setting the new ringtone: On your phone, press the [Menu] key, then select Settings. Go to the Profiles section. Select the profile you want to modify and press [Options] > [Settings] to edit the profile according to your preferences. Locate the Ringtone option, where you should see your new ringtone added to the list. Select it and press [Finish] to save the changes.

If your custom ringtone does not appear in the list after transfer, first check that the file is correctly placed in the Ringtones folder on your microSD card and that it is in MP3 or WAV format. Then restart your Boost LTE phone to refresh the list of available ringtones. The external speaker of the phone is used for all system sounds, ringtones, and music.

Question 2

How to perform the initial setup of the Hammer Rock phone?

Accepted Answer

To set up your Hammer Rock phone, follow these simple steps in order:

Insert the battery and SIM card: If the phone is on, turn it off. Unscrew the screws from the battery compartment. Insert the SIM card(s) with the gold contacts facing down, placing them in the slot according to the markings. Insert the 3000 mAh (or 2800 mAh depending on the model) battery, ensuring that its gold contacts touch the connector in the slot. Close the cover and tighten the screws.
Charge the battery: Use a USB Type-C charger (not included with the phone). Connect the USB Type-C cable to the phone's charging port, then plug the charger into a power outlet. A charging icon will appear on the screen. The maximum charging time should not exceed 12 hours. Once the battery is full, unplug the charger.
Turn on the phone: Press and hold the red Combined button (call button) until the phone starts and displays the home screen.
Enter the PIN code if necessary: If your SIM card is protected by a PIN code, the phone will prompt you for it at startup. Enter the code (which will appear as asterisks: ******) and press the Menu key to confirm.
Set up battery management: On first startup, the phone will offer you to choose a battery management mode. You can select Normal mode (100% charge) or Economy mode (80% charge to extend battery life). This setting can also be changed later via [Menu] > [Settings] > [Battery Management].
Check functionality: Once the startup is complete, check that the phone is receiving a network signal (visible signal bars). You can then make calls, send SMS, and access other features of your rugged device.

The Hammer Rock has a 24-hour standby battery life under normal usage and features IP68 protection against water and dust. For maintenance, refer to the regular cleaning recommendations in the manual.

Question 3

How to activate airplane mode on the Hammer BOW LTE phone?

Accepted Answer

The Hammer BOW LTE phone is a rugged and basic phone that does not come equipped with an airplane mode like modern smartphones. In accordance with aviation safety standards, the manual simply recommends completely turning off the phone during a flight. This applies to all wireless electronic devices, as they can interfere with the aircraft's navigation and communication systems.

To turn off your Hammer BOW LTE, press the power button located on the side of the phone and hold it down until the screen completely turns off. The phone will remain off until you turn it back on by pressing this button again.

If you are looking for a solution to conserve your battery or temporarily disable incoming calls without completely turning off the phone, you can access [Menu] > [Settings] > [Profiles] to switch to silent profile or another sound profile as needed.

As a phone designed for ruggedness and durability rather than advanced features, the Hammer BOW LTE has more limited connectivity options than modern smartphones. The airplane mode function is therefore replaced by the simple and effective turning off of the phone.

User manual Hammer : user manuals and guides in PDF

Models Hammer most viewed

Browse manuals Hammer by appliance type

Recent questions about devices Hammer