R7060 - Programador de rega WOOX - Manual de utilização gratuito

Tipo de produto	Programador de rega
Marca	WOOX
Modelo	R7060
Alimentação	2 pilhas AA (não incluídas)
Conexão de entrada	Fêmea 3/4" com anel de vedação
Conexão de saída	Macho 3/4" e Quick-Click macho
Pressão máxima de água	6 bar
Fluxo máximo	25 L/min
Programação	Até 4 regas por dia, 7 dias
Duração da rega	1 min a 3 horas
Número de zonas	1 zona
Proteção contra intempéries	IP54
Material do invólucro	ABS resistente a UV
Dimensões	12 x 7 x 7 cm
Peso	250 g (sem pilhas)
Manutenção	Limpar o filtro regularmente; não usar solventes
Segurança	Função paragem manual; anticongelante automático
Garantia	2 anos

Perguntas frequentes - R7060 WOOX

Como instalar o programador R7060?

Fixe o programador em uma torneira externa usando a conexão fêmea 3/4" com anel de vedação. Certifique-se de que o anel está bem colocado para evitar vazamentos. Em seguida, aparafuse a mangueira de rega na saída macho ou Quick-Click.

Que tipo de pilhas usar?

Use duas pilhas alcalinas AA 1,5V. Não misture pilhas novas e usadas. Substitua-as a cada estação ou em caso de visor fraco.

Como programar os horários de rega?

Pressione o botão PROGRAM para aceder às configurações. Use as setas para definir a hora de início, a duração (1 min a 3 h) e os dias da semana. Confirme com OK.

O que fazer se o programador não ligar?

Verifique se as pilhas estão corretamente inseridas (respeite a polaridade). Se o ecrã permanecer vazio, substitua as pilhas. Se o problema persistir, contacte o serviço pós-venda.

Como limpar o filtro?

Desaperte a tampa do filtro localizada na entrada de água. Remova o filtro e enxágue-o em água limpa. Recoloque-o e aperte firmemente. Realize esta operação pelo menos uma vez por mês.

Posso usar o R7060 com um recuperador de água da chuva?

Sim, desde que a pressão da água seja suficiente (mínimo 0,5 bar). Se a pressão for muito baixa, o programador pode não abrir corretamente.

O que fazer em caso de vazamento nas conexões?

Verifique se os anéis de vedação estão em bom estado e bem posicionados. Reapertar as conexões manualmente sem forçar. Se o vazamento persistir, substitua os anéis.

O programador é resistente ao gelo?

Sim, possui uma função anticongelante que fecha automaticamente a válvula em caso de temperatura próxima de 0°C. No entanto, é recomendável guardá-lo no inverno.

Quantas zonas pode gerir?

Este modelo foi concebido para uma única zona de jardim. Para várias zonas, precisará de um programador multizona ou de um dispositivo adicional.

Como redefinir as configurações de fábrica?

Pressione simultaneamente os botões PROGRAM e OK durante 5 segundos. O ecrã mostrará CLR e as configurações padrão serão restauradas. As pilhas devem estar colocadas.

MANUAL DE UTILIZADOR R7060 WOOX

W00X

Green industrial water pump device with black fittings and a small pipe fitting (no visible text or symbols)

If necessary, you can change Male Quick-Click connector to 3/4" Male connector

English

English

English

STEP2.

Illustration of hands assembling or adjusting a mechanical component (no text or symbols visible)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

English

STEP4.

Illustration of hands assembling or adjusting a mechanical component, no text or symbols present

English

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component (no text or symbols visible)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling or adjusting a mechanical component, no text or symbols present

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling or adjusting a mechanical component, no text or symbols present

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, no text or symbols present

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)

STEP1.

Illustration of a hand holding a mechanical component with an arrow indicating direction (no text or symbols present)

STEP2.

Illustration of hands assembling or adjusting a mechanical component, enclosed in a circular frame (no text or symbols)

STEP3.

Technical line drawing of a mechanical device with internal components, enclosed in a circular frame (no text or symbols)

STEP4.

Illustration of hands assembling a cylindrical object with a cap, enclosed in a circular frame (no text or symbols)