BH-100 - Écouteurs sans fil NOKIA - Notice d'utilisation et mode d'emploi gratuit

Type de produit	Écouteurs sans fil (Bluetooth Headset)
Marque	NOKIA
Modèle	BH-100
Technologie Bluetooth	Bluetooth 2.0 + EDR
Profils Bluetooth supportés	Headset Profile 1.1, Hands-Free Profile 1.5
Portée maximale	10 mètres (30 pieds)
Autonomie en conversation	Jusqu'à 6 heures 30 minutes
Autonomie en veille	Jusqu'à 150 heures
Temps de charge	Jusqu'à 1 heure 30 minutes
Type de batterie	Batterie rechargeable interne non amovible
Chargeurs compatibles	Nokia AC-3, AC-4, DC-4
Boutons de commande	Marche/arrêt, réponse/fin
Indicateur lumineux	Vert (allumé/charge complète), Rouge (charge/faible batterie)
Microphone	Intégré
Oreillette	Interchangeable, disponible en plusieurs couleurs
Compatibilité	Téléphones compatibles Bluetooth avec profils Headset/Hands-Free
Température de stockage recommandée	Entre 15°C et 25°C
Entretien	Garder au sec, éviter poussière et températures extrêmes
Sécurité	Ne pas ouvrir, ne pas exposer au feu, recycler selon réglementations
Contenu de la boîte	Casque BH-100, oreillette(s) de rechange, guide d'utilisation

FOIRE AUX QUESTIONS - BH-100 NOKIA

Comment appairer le casque BH-100 avec mon téléphone ?

Assurez-vous que le casque est éteint. Maintenez enfoncée la touche marche/arrêt jusqu'à ce que le voyant vert clignote rapidement. Activez le Bluetooth sur votre téléphone et recherchez les appareils. Sélectionnez 'Nokia BH-100' dans la liste. Entrez le code 0000 si demandé. Le casque émettra un bip et sera prêt à l'emploi.

Comment charger la batterie ?

Détachez l'oreillette du côté gauche du casque. Branchez le chargeur (Nokia AC-3, AC-4 ou DC-4) sur une prise secteur et connectez le câble au connecteur de charge du casque. Le voyant rouge s'allume pendant la charge. Lorsqu'il devient vert, la charge est terminée. La charge complète prend jusqu'à 1h30.

Quelle est l'autonomie de la batterie ?

L'autonomie en conversation est de jusqu'à 6h30 et en veille de jusqu'à 150 heures. Les performances peuvent varier selon le téléphone et l'utilisation.

Comment allumer ou éteindre le casque ?

Pour allumer, maintenez enfoncée la touche marche/arrêt jusqu'à entendre un bip et voir le voyant vert. Pour éteindre, maintenez la même touche enfoncée jusqu'au bip et au voyant rouge bref.

Comment répondre ou terminer un appel ?

Appuyez sur la touche réponse/fin pour répondre à un appel entrant ou pour terminer un appel en cours. Pour rejeter un appel, appuyez deux fois rapidement sur cette touche.

Comment passer un appel en utilisant la numérotation vocale ?

Si votre téléphone prend en charge la numérotation vocale, maintenez enfoncée la touche réponse/fin lorsqu'aucun appel n'est en cours. Suivez ensuite les instructions de votre téléphone pour la numérotation vocale.

Que faire si le casque ne se connecte pas ?

Vérifiez que le casque est allumé et que le Bluetooth de votre téléphone est activé. Si nécessaire, supprimez l'appairage existant et répétez la procédure d'appairage. Vous pouvez également réinitialiser le casque en maintenant enfoncées les touches marche/arrêt et réponse/fin simultanément pendant que le casque est branché au chargeur.

Comment réinitialiser le casque ?

Si le casque ne fonctionne plus correctement, branchez-le au chargeur, puis maintenez enfoncées simultanément les touches marche/arrêt et réponse/fin jusqu'à ce que les voyants rouge et vert alternent. Relâchez les touches.

Comment porter le casque sur l'oreille gauche ou droite ?

Pour l'oreille droite, détachez l'oreillette du côté droit du casque (dos face à vous). Pour l'oreille gauche, détachez-la du côté gauche. Faites glisser l'oreillette derrière votre oreille et orientez le micro vers votre bouche.

Comment entretenir le casque ?

Gardez le casque au sec et évitez la poussière. Ne l'exposez pas à des températures extrêmes. N'utilisez pas de produits chimiques agressifs pour le nettoyer. Ne tentez pas d'ouvrir le boîtier. Recyclez la batterie selon les réglementations locales.

MODE D'EMPLOI BH-100 NOKIA

Nokia Bluetooth Headset BH-100

Issue 1

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this HS-78W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.

C€0434

© 2007 Nokia. All rights reserved.

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

Unauthorized changes or modifications to this device may void the user's authority to operate the equipment.

Export Controls

This device may contain commodities, technology or software subject to export laws and regulations from the US and

Introduction

The Nokia Bluetooth Headset BH-100 allows you to make and receive calls while on the move. You can use the headset with compatible phones that support Bluetooth wireless technology.

Read this user guide carefully before using the headset. Also read the user guide for your phone, which provides important safety and maintenance information. Keep the headset out of reach of small children.

Bluetooth wireless technology

Bluetooth wireless technology allows you to connect compatible devices without cables. The phone and the headset do not need to be in line of sight, but they should be within 10 meters (30 feet) of each other. Connections may be subject to interference from obstructions, such as walls, or other electronic devices.

The headset complies with the Bluetooth Specification 2.0 + EDR that supports the Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

The headset contains the following parts shown on the title page: indicator light (1), power key (2), microphone (3), charger connector (4), answer/end key (5), and changeable earloop (6).

Before using the headset, you must charge the battery and pair the headset with a compatible phone.

Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased.

Chargers

Check the model number of any charger before using it with this device. The headset is intended for use with the AC-3, AC-4, and DC-4 chargers.

Warning: Use only chargers approved by

Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Charge the battery

The headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device, as you may damage the device.

1. When the back of the headset is facing you, detach the earloop from the left of the headset.
2. Connect the charger to a wall outlet.
3. Connect the charger cable to the charger connector (7). The red indicator light is on while

charging. It may take a while before charging starts. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 1 hour and 30 minutes.

1. When the battery is fully charged, the indicator light turns green. Disconnect the charger from the headset and the wall outlet.

The fully charged battery has power for up to 6 hours and 30 minutes of talktime or up to 150 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments.

When battery power falls low, the headset beeps and the red indicator light starts to flash.

Switch the headset on or off

To switch on, press and hold the power key until the headset beeps and the green indicator light is displayed.

To switch off, press and hold the power key until the headset beeps and the red indicator light is displayed briefly.

Pair the headset

1. Ensure that your phone is switched on and the headset is switched off.
2. Press and hold the power key until the green indicator light starts to flash quickly.
3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.
4. Select the headset from the list of found devices.
5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may

need to make the connection separately after pairing. You only need to pair the headset with your phone once.

If the pairing is successful, the headset beeps and appears in the phone menu where you can view the currently paired Bluetooth devices. The headset is now ready for use.

Basic use

Place the headset on the ear

The headset has an earloop attached around it. To use the headset without placing the earloop over the ear, plug the earpiece into your ear.

To use the headset with the earloop on the right ear, detach the earloop from the right of the headset (8) when the back of the headset is facing you; to use the headset on the left ear, detach the earloop from the left. Slide the earloop behind your ear (9), and point the headset toward your mouth (10).

Change the earloop

The headset may be supplied with earloops in different colors. To change the earloop, detach it from both sides of the headset, and attach the new earloop by inserting the catches at the ends of the earloop into the corresponding slots in the headset.

Call handling

To make a call, use your phone in the normal way when the headset is connected to your phone.

If your phone supports last number redialing with the headset, press

the answer/end key twice while no call is in progress.

If your phone supports voice dialing with the headset, press and hold the answer/end key when no call in progress, and proceed as described in the user guide of your phone.

To answer or end a call, press the answer/end key. To reject an incoming call, press the answer/end key twice.

To adjust the headset volume during a call, use the volume keys on your phone.

To switch the call between the headset and a compatible phone, press and hold the answer/end key.

Clear settings or reset

To clear the pairing settings from the headset, switch off the headset, and press and hold the power key and the answer/end key until the red and green indicator lights start to alternate.

To reset the headset if it stops functioning, although it is charged, plug the headset into a charger, and press the power key and the answer/end key at the same time.

Battery information

Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.

Never use any charger that is damaged.

Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged.

Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage.

• Keep all accessories and enhancements out of the reach of small children.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If

your device does get wet, allow it to dry completely.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to

its normal temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.