Q: How to use the clock button on the SMEG SUK61MFX5?

The clock button (symbol "山") is the heart of the electronic programmer of this SMEG cooker. It allows for three main functions: Initial time setting After the first installation or a power cut, the display flashes with "000". To correct the time: Press the "山" button and the + or - keys simultaneously Each press adjusts the time by one minute Once set, the screen displays the time with the symbol "山" Semi-automatic cooking (programmed stop) The clock button activates the automatic stop after a time you set. The oven turns off by itself at the end of the set duration. Automatic cooking (programmed start and stop) Combine the "山" button with the "end" key to program the exact stop time of the oven. The programmer will start and stop cooking at the times you have set. Important: Before activating the programmer, first select the cooking function and the desired temperature. This allows the system to correctly synchronize the programming with the chosen cooking mode.

Q: How to open and remove the door of the SMEG CX68MF8 oven

To open the door of the SMEG CX68MF8 oven: Open it completely towards you You will see the two pivots on each side of the hinges If you need to remove the door (for cleaning or accessing the inside): Open it to the maximum Insert the two pivots into the designated holes of the hinges Gently lift the door upwards while holding it firmly on both sides, tilting it at about 30 degrees Carefully detach it from the hinges Important points: Do not apply excessive pressure on the open door to avoid damaging the appliance. The SMEG CX68MF8 oven has a single cooking chamber - there is no separate lower door. The inner glass of the door is removable for easy cleaning. To reattach the door, align the hinges with the designated slots, then lower it into place by removing the pivots from the holes.

Q: How to activate the Accelerator mode on the SMEG SI1M7643B cooker?

The Accelerator mode of the SMEG SI1M7643B cooker allows for quick heating of a cooking zone by temporarily activating the maximum power. This mode is particularly useful for boiling water or quickly searing food, especially on the front left (2300 W) and back left (2300 W) burners which have the highest power. Activation conditions: The Accelerator mode can only function if the cooking zone is completely cold. If you have just used a zone, you must wait for it to cool down before activating this function. Activation procedure: Press the right end of the selection panel located on the front of the cooktop (the “P” indicator or the Accelerator symbol will light up). Immediately set the desired cooking level by sliding your finger on the selection panel. After 3 seconds, the Accelerator symbol will light up permanently, confirming activation. The zone will then start heating at maximum level, and will automatically decrease to the level you have chosen. Operation: Once the mode is activated, the cooking zone starts at the highest power (for example, 3200 W for the front and back left burners, or 2800 W for the back right burner) to quickly generate the necessary heat. As soon as the temperature approaches the desired level, the power adjusts automatically to maintain that level. Deactivation: To turn off the Accelerator mode, simply change the cooking level by pressing a new value on the selection panel. The mode will turn off and the zone will operate according to the new level chosen. Important: If the Accelerator mode does not activate, it usually means that the zone is still hot from a previous use. Wait a few minutes and try again when the zone has completely cooled down. On this cooktop, the key lock and Auto-Vent function may influence the settings: consult the manual if in doubt.

Q: How to set the timer on the SMEG SF6400TVX oven?

To set the timer on your SMEG SF6400TVX oven , press the timer key on the control panel. The digital display will show the numbers with a blinking indicator between the hours and minutes. Then use the + and - keys to adjust the desired duration. Hold the key down to quickly increase or decrease the value. You can program up to 24 hours maximum . Once the duration is selected, wait about 5 seconds without pressing any keys for the timer to activate. The display will then return to the current time. The timer will then count down and alert you with a sound signal when the time is up. Important: The timer on the SMEG SF6400TVX does not stop the cooking. It simply alerts you when the set time is up. You can activate it at any time during the use of the oven, before or during cooking. To display the remaining time, press the timer key again. If you wish to cancel the timer, press the + and - keys on the programmer simultaneously to reset the device.

Q: What is the static turbo function on the SMEG GM90X9 cooker?

The static turbo function on the SMEG GM90X9 cooker is a cooking mode that combines heat from the upper and lower heating elements with the air circulation generated by a fan. This system allows for even heat distribution inside the oven. Advantages of the static turbo function: More uniform cooking of food thanks to the circulation of hot air. Achieving a golden and crispy crust while keeping the inside moist. Reduction of cold spots and temperature differences in the oven. This function is ideal for dishes that require even cooking, such as pastries, roasted meats, or gratins. It combines the benefits of traditional static cooking with the efficiency of a fan to enhance culinary results.

Question 1

How to use the clock button on the SMEG SUK61MFX5?

Accepted Answer

The clock button (symbol "山") is the heart of the electronic programmer of this SMEG cooker. It allows for three main functions:

Initial time setting

After the first installation or a power cut, the display flashes with "000". To correct the time:

Press the "山" button and the + or - keys simultaneously
Each press adjusts the time by one minute
Once set, the screen displays the time with the symbol "山"

Semi-automatic cooking (programmed stop)

The clock button activates the automatic stop after a time you set. The oven turns off by itself at the end of the set duration.

Automatic cooking (programmed start and stop)

Combine the "山" button with the "end" key to program the exact stop time of the oven. The programmer will start and stop cooking at the times you have set.

Important: Before activating the programmer, first select the cooking function and the desired temperature. This allows the system to correctly synchronize the programming with the chosen cooking mode.

Question 2

How to open and remove the door of the SMEG CX68MF8 oven

Accepted Answer

To open the door of the SMEG CX68MF8 oven:

Open it completely towards you
You will see the two pivots on each side of the hinges

If you need to remove the door (for cleaning or accessing the inside):

Open it to the maximum
Insert the two pivots into the designated holes of the hinges
Gently lift the door upwards while holding it firmly on both sides, tilting it at about 30 degrees
Carefully detach it from the hinges

Important points: Do not apply excessive pressure on the open door to avoid damaging the appliance. The SMEG CX68MF8 oven has a single cooking chamber - there is no separate lower door. The inner glass of the door is removable for easy cleaning.

To reattach the door, align the hinges with the designated slots, then lower it into place by removing the pivots from the holes.

Question 3

How to access the door glass for cleaning?

Accepted Answer

To regularly clean the glass of your SMEG CS19-5 cooker door, simply use paper towels, which are usually sufficient to keep the glass clean. In case of persistent dirt or ingrained residues, wash the glass with a damp sponge and a common neutral detergent, then rinse and wipe with a soft cloth.

If you need to access the glass to replace it or for a deep clean, it is necessary to disassemble the door. Before any intervention, ensure that the appliance is unplugged from its power supply. Fully open the oven door.

To remove the door, insert the pivots provided with your cooker into the holes located on the inner side of the door. Then close the door at an angle of about 45 degrees (and not fully closed). Gently lift the door upwards and pull it towards you to completely extract it from its housing.

Once the door is removed, you can access the glass and its components. To reassemble the door, insert the hinges into the grooves designed for this purpose on the oven, then let the door gradually lower while guiding it. Finally, remove the pivots and fully close the door.

For glass replacement or any other intervention requiring more extensive disassembly, contact an authorized SMEG service center that has original spare parts and qualified personnel to carry out this operation safely.

Question 4

How to activate the Accelerator mode on the SMEG SI1M7643B cooker?

Accepted Answer

The Accelerator mode of the SMEG SI1M7643B cooker allows for quick heating of a cooking zone by temporarily activating the maximum power. This mode is particularly useful for boiling water or quickly searing food, especially on the front left (2300 W) and back left (2300 W) burners which have the highest power.

Activation conditions: The Accelerator mode can only function if the cooking zone is completely cold. If you have just used a zone, you must wait for it to cool down before activating this function.

Activation procedure: Press the right end of the selection panel located on the front of the cooktop (the “P” indicator or the Accelerator symbol will light up). Immediately set the desired cooking level by sliding your finger on the selection panel. After 3 seconds, the Accelerator symbol will light up permanently, confirming activation. The zone will then start heating at maximum level, and will automatically decrease to the level you have chosen.

Operation: Once the mode is activated, the cooking zone starts at the highest power (for example, 3200 W for the front and back left burners, or 2800 W for the back right burner) to quickly generate the necessary heat. As soon as the temperature approaches the desired level, the power adjusts automatically to maintain that level.

Deactivation: To turn off the Accelerator mode, simply change the cooking level by pressing a new value on the selection panel. The mode will turn off and the zone will operate according to the new level chosen.

Important: If the Accelerator mode does not activate, it usually means that the zone is still hot from a previous use. Wait a few minutes and try again when the zone has completely cooled down. On this cooktop, the key lock and Auto-Vent function may influence the settings: consult the manual if in doubt.

Question 5

How to set the timer on the SMEG SF6400TVX oven?

Accepted Answer

To set the timer on your SMEG SF6400TVX oven, press the timer key on the control panel. The digital display will show the numbers with a blinking indicator between the hours and minutes.

Then use the + and - keys to adjust the desired duration. Hold the key down to quickly increase or decrease the value. You can program up to 24 hours maximum.

Once the duration is selected, wait about 5 seconds without pressing any keys for the timer to activate. The display will then return to the current time. The timer will then count down and alert you with a sound signal when the time is up.

Important: The timer on the SMEG SF6400TVX does not stop the cooking. It simply alerts you when the set time is up. You can activate it at any time during the use of the oven, before or during cooking.

To display the remaining time, press the timer key again. If you wish to cancel the timer, press the + and - keys on the programmer simultaneously to reset the device.

Question 6

Why does the circuit breaker trip when I select a cooking mode on my SMEG GM90X9 oven?

Accepted Answer

When the circuit breaker trips as soon as you select a cooking mode on your SMEG GM90X9 oven, it usually indicates an electrical problem related to the appliance or the installation. Here are the most common causes:

1. Circuit overload

If several powerful electrical appliances are running simultaneously on the same circuit as your stove, it can cause an overload and trip the circuit breaker. Check if other appliances are plugged into the same line and try temporarily unplugging them.

2. Internal short circuit in the oven

A defective component, such as a heating element or thermostat, can cause a short circuit in the oven. This fault leads to an excessive current draw that trips the circuit breaker.

3. Wiring or grounding issue

Damaged wiring, poor connections, or lack of proper grounding can also cause the circuit breaker to trip. It is important that the electrical installation complies with current standards.

What to do?

Unplug the stove and check if the circuit breaker continues to trip without it.
Test the oven alone while avoiding using other appliances on the same circuit.
If the problem persists, contact a qualified electrician or SMEG customer service to diagnose and safely repair the fault.

Do not attempt to intervene on electrical components yourself if you are not trained, as this can be dangerous.

Question 7

What is the static turbo function on the SMEG GM90X9 cooker?

Accepted Answer

The static turbo function on the SMEG GM90X9 cooker is a cooking mode that combines heat from the upper and lower heating elements with the air circulation generated by a fan. This system allows for even heat distribution inside the oven.

Advantages of the static turbo function:

More uniform cooking of food thanks to the circulation of hot air.
Achieving a golden and crispy crust while keeping the inside moist.
Reduction of cold spots and temperature differences in the oven.

This function is ideal for dishes that require even cooking, such as pastries, roasted meats, or gratins. It combines the benefits of traditional static cooking with the efficiency of a fan to enhance culinary results.

Question 8

What does the "brassée sole" function mean on the SMEG GM90X9 cooker?

Accepted Answer

The "brassée sole" function on the SMEG GM90X9 cooker refers to a cooking mode where heat is evenly distributed at the bottom of the oven, that is, the lower part of the cavity.

Specifically, this function uses a ventilation or hot air circulation system at the sole, allowing for:

An even distribution of heat on the bottom surface of the food,
Homogeneous cooking, avoiding hot or cold spots,
Better browning and crispiness of dishes cooked on the sole, such as pizzas, tarts, or breads.

This function is particularly suitable for cooking that requires intense and constant heat from below, while maintaining even cooking across the entire surface.

Question 9

Where are the pivots located on the SMEG GM90X9 cooker?

Accepted Answer

The pivots on the SMEG GM90X9 cooker are two pivots located at the level of the oven door hinges. They allow for easy removal of the door for cleaning the glass and the inside of the door.

Precise location: The two pivots are found in the hinge holes located on the left and right sides of the door when it is open. Each hinge has a hole designed to receive a pivot.

How to access the pivots:

Open the oven door completely
Observe the two hinges, one on each side: the pivots are the pivot points located in the hinge openings
These pivots fit into holes that are clearly visible when the door is fully opened

Function: The pivots serve as support points allowing you to lift and remove the door without damaging it. To remove the door, insert the two pivots into the hinge holes as indicated, then lift the door upwards at an angle of about 30° to completely extract it. This operation greatly facilitates the cleaning of the internal glass and the door seal.

The pivots require no special maintenance: they are simply part of the articulated mechanism of the door.

Question 10

Where can I find door removal pivots for the SMEG GM90X9 cooker?

Accepted Answer

The door removal pivots for the SMEG GM90X9 are part of the hinge system. These elements are essential for easily removing the door for cleaning. According to the user manual, to remove the door, you need to fully open it, then insert the two pivots into the hinge holes and lift the door upwards at an angle of about 30°.

Original spare parts: To find compatible pivots for your GM90X9 model, always prefer original SMEG parts. These components are available from certified distributors in France.

Main supply sources:

Sogedis: Official distributor offering a complete catalog of certified spare parts for the GM90X9 SI00 model, with a detailed exploded view showing the exact references. Delivery within 48 hours is generally possible.
Adepem: Specialist in spare parts for household appliances offering original SMEG components for the GM90X9.
PCDT.fr: Lists hinges and accessories for compatible SMEG models, with discounts of up to 50% on certain parts.
Official SMEG France website: Access the spare parts section directly to order guaranteed original components.

To obtain the exact references: Contact one of these distributors directly with your exact model number (GM90X9 followed by the finish code, for example, SI00 for the stainless steel version). Most offer a downloadable exploded view that indicates the precise part number for each component. You can also contact an authorized SMEG service center that will order the exact part you need and can advise you on installation.

Practical advice: Bring your complete serial number (located on the identification plate of your cooker) when placing your order. This ensures perfect compatibility with your appliance and avoids any errors during ordering.

User manual SMEG Cooker : user manuals and guides in PDF

Models SMEG Cooker most viewed

Other categories SMEG

Recent questions about Cooker SMEG