How to change the diamond of the LENCO L-69 turntable?

Question

Accepted Answer

To change the diamond of your LENCO L-69 turntable, follow these precise steps to ensure safe handling and proper functioning of your device:

Steps to replace the diamond:

Preparation: Unplug the turntable from the electrical outlet and place it on a stable and clean surface.
Accessing the cartridge: Gently lift the tonearm. Depending on the model, there may be a lever or a lock to unlock.
Removing the cartridge: The cartridge containing the diamond is attached to the end of the arm. Unscrew the screws holding it if necessary, noting their position for reassembly.
Extracting the diamond: The diamond may be clipped or screwed onto the cartridge. If clipped, gently press on the sides to release it. If screwed, use a small suitable screwdriver to unscrew it without forcing.
Installing the new diamond: Position the new diamond by aligning it correctly with the cartridge. Snap it in or screw it in firmly but without excess.
Reassembly: Replace the cartridge on the tonearm and screw it back securely, respecting the initial positions.
Final test: Plug the turntable back in and play a vinyl to check the sound quality and the proper functioning of the new diamond.

Additional tips:

Always handle the diamond with care to avoid damaging it.
Use appropriate tools and avoid forcing when unscrewing or clipping.
If you encounter difficulty or doubt, do not hesitate to seek help from a professional specialized in turntables.