The BLACKSTAR ID:Core Stereo 20 V2 amplifier is not recognized via USB by my PC - how do I configure the connection?

Q: The BLACKSTAR ID:Core Stereo 20 V2 amplifier is not recognized via USB by my PC - how do I configure the connection?

The good news: according to the manual, the amplifier does not require any specific driver . The standard audio drivers for Windows and Mac are sufficient for it to be recognized. If your PC does not display the amplifier as a USB device, check in this order: The amplifier is powered on - It must be turned on before plugging in the USB cable. Wait a few seconds after powering on for the connection to be detected. Main USB port - Plug the cable into a main USB port usually located at the back of your computer, not into an external USB hub or a front port of the case. USB port of the amplifier - Make sure you are using the USB port at the front of the amplifier (item 13 in the manual). Secure USB cable - Ensure that the cable is firmly connected on both ends and that it is not damaged. Test with another USB cable if possible. If the problem persists, download Blackstar Insider from www.blackstarinsider.co.uk to diagnose the connection and update the firmware. For specific advice on USB recording with zero latency, also check www.blackstaramps.com/usbrecording .

Question

Accepted Answer

The good news: according to the manual, the amplifier does not require any specific driver. The standard audio drivers for Windows and Mac are sufficient for it to be recognized.

If your PC does not display the amplifier as a USB device, check in this order:

The amplifier is powered on - It must be turned on before plugging in the USB cable. Wait a few seconds after powering on for the connection to be detected.
Main USB port - Plug the cable into a main USB port usually located at the back of your computer, not into an external USB hub or a front port of the case.
USB port of the amplifier - Make sure you are using the USB port at the front of the amplifier (item 13 in the manual).
Secure USB cable - Ensure that the cable is firmly connected on both ends and that it is not damaged. Test with another USB cable if possible.

If the problem persists, download Blackstar Insider from www.blackstarinsider.co.uk to diagnose the connection and update the firmware. For specific advice on USB recording with zero latency, also check www.blackstaramps.com/usbrecording.

User manual BLACKSTAR Guitar amp : user manuals and guides in PDF

Models BLACKSTAR Guitar amp most viewed

Other categories BLACKSTAR

Recent questions about Guitar amp BLACKSTAR