Q: Can I order a replacement LED bulb in case of failure?

Yes, absolutely! The LED bulb of the SULION MARINA M fan is replaceable, and you can order a new one in case of failure. LED Bulb Specifications Power : 24 W Brightness : 2400 lm Color Temperatures : 3000 K, 4000 K, 5000 K (adjustable) Light Angle : 120° Color Rendering Index : > 80 Lifetime : 30,000 hours Warranty : 5 years (specific LED warranty in addition to the 3 years general warranty) How to Order a Replacement Part Contact SULION customer service to obtain a replacement LED bulb. You can reach out to them specifying the MARINA M model and the product code of your device (visible on the back panel). You can also visit the sulion.es website with the EAN code 8426107059345 to access the complete product guide and options for ordering spare parts.

Q: Why does the SULION CLOE S fan not have a switch on the motor?

That's normal. The SULION CLOE S fan is not designed with a physical switch on the motor. Control is done entirely via the provided remote control . How it works The wall switch powers the device (220-240V~, 50/60 Hz). It must remain permanently activated. The remote control starts and stops the fan, and allows you to manage the 6 speeds, the "natural breeze" function, the direction reversal, and the timer. ⚠️ Important: Never connect the motor power to a dimmer, rheostat, or wall potentiometer. This would damage the motor and void the warranty. Only the remote control should operate the device.

Q: Which button on the remote control allows you to reverse the rotation direction of the CLOE S fan?

The SULION CLOE S fan is equipped with a rotation button on the remote control that allows you to reverse the motor's rotation direction. Simply press this button to switch between clockwise and counterclockwise modes. The two modes Summer mode (counterclockwise): creates a downward airflow for direct cooling Winter mode (clockwise): pushes warm air from the ceiling down for better thermal redistribution If you prefer not to use the remote control, the fan also has a physical switch on the motor for manual rotation direction reversal.

Question 1

Which parts should be replaced to repair the lighting of the CLOE S fan?

Accepted Answer

If the lighting of your SULION CLOE S fan is not working, two components may be responsible and are replaceable:

The LED module - This is the main light source that provides 2000 lumens with a lifespan of 30,000 hours
The driver (power converter) - This is the component that powers and regulates the LED module

Replacement procedure

Here’s how to proceed:

Turn off the power to the fan
Remove the diffuser from the fixture
Replace the faulty LED module with a new one
If the problem persists, also replace the driver

Important: The LED lighting of the CLOE S comes with a 5-year warranty, while the motor is guaranteed for 8 years and the rest of the appliance for 3 years. If your appliance is still under warranty, contact customer service rather than attempting to replace it yourself.

Question 2

Why is my SULION CLOE S fan not turning?

Accepted Answer

If your SULION CLOE S fan is not turning, follow these checks in order:

1. Check the remote control

New batteries - Install new batteries in the remote control and ensure they are correctly oriented
Range - Make sure the remote control is close to the motor receiver (no more than a few meters away)

2. Check the power supply

Ensure that the fan is properly plugged into a working outlet
Test the outlet with another device (lamp, charger) to confirm it is supplying power
Check that no circuit breaker has tripped in your electrical panel

3. Synchronize the remote control with the receiver

If the remote control is unresponsive:

Plug in the fan
Within 5 seconds, press and hold any button on the remote control for 3 seconds
You should hear a sound signal confirming the synchronization
Then test the different power levels (the CLOE S has 6 levels)

4. Important: Only use the provided remote control

Warning - The DC motor of the CLOE S must only be operated by the provided remote control. Never connect the motor power to a wall switch or dimmer, as this would immediately damage the motor and void your warranty (8 years for the DC motor).

If after these checks the fan still does not start, contact Sulion: +34 91 674 94 81 (info@sulion.es) or technical support at +34 91 674 94 83 (sat@sulion.es).

Question 3

How to cancel a scheduled stop of the MARINA M fan?

Accepted Answer

If you have set a scheduled stop on your SULION MARINA M fan via the remote timer and wish to cancel it before it turns off, it's very simple.

To cancel the scheduled stop: simply press any button on your remote control (for example, a speed button, the lighting button, or any other available control). The scheduled stop will be immediately canceled.

To restart the fan after cancellation: once the scheduled stop is canceled, you can turn the fan back on by selecting one of the 5 available speed levels on the remote control. The device will restart at the power level you have chosen.

Question 4

Can I order a replacement LED bulb in case of failure?

Accepted Answer

Yes, absolutely! The LED bulb of the SULION MARINA M fan is replaceable, and you can order a new one in case of failure.

LED Bulb Specifications

Power: 24 W
Brightness: 2400 lm
Color Temperatures: 3000 K, 4000 K, 5000 K (adjustable)
Light Angle: 120°
Color Rendering Index: > 80
Lifetime: 30,000 hours
Warranty: 5 years (specific LED warranty in addition to the 3 years general warranty)

How to Order a Replacement Part

Contact SULION customer service to obtain a replacement LED bulb. You can reach out to them specifying the MARINA M model and the product code of your device (visible on the back panel).

You can also visit the sulion.es website with the EAN code 8426107059345 to access the complete product guide and options for ordering spare parts.

Question 5

Does the MARINA M fan emit a beep with each press of the remote control buttons?

Accepted Answer

No, the SULION MARINA M fan does not have a persistent beep mode for each button press.

The manual mentions only one sound signal: the synchronization beep that sounds once during the pairing of the remote control. This signal occurs according to the following process:

Turn on the power (wall switch) of the fans to be controlled
Within 10 seconds, press the FAN OFF button on the remote control for 2-5 continuous seconds
A "beep" sound indicates that the connection has been made

Once the synchronization is confirmed, the remote control operates in silent mode: there is no sound feedback during subsequent button presses. This is the normal and expected behavior for this model.

Question 6

How does the remote control of the SULION CLOE S fan work?

Accepted Answer

The remote control of the SULION CLOE S fan allows you to control the device wirelessly with 5 main functions:

Speeds: Control the 6 power levels of the motor according to your needs (from low power to maximum)
Rotation direction reversal: A dedicated button toggles between clockwise mode (winter, warm air redistribution) and counterclockwise (summer, cooling effect)
Natural breeze mode: Automatically increases and decreases speed to simulate a variable breeze
Programmable timer: Schedule the automatic shutdown of the device according to your preferences
Lighting: Control the brightness (dimmable) of the 3 available color temperatures (3000K, 4000K, 5000K)

Important: The device comes already synchronized from the factory with its remote control. If you need to synchronize manually, press the remote control button for 3 seconds within 5 seconds of powering on - you will hear a beep confirming the connection.

Note: The wall switch (main power) must remain in the ON position. Only the remote control operates the device - never connect the power to a potentiometer or adjustment element.

Question 7

Does the SULION CLOE S fan have WiFi connectivity or a mobile app?

Accepted Answer

No, the SULION CLOE S fan does not have a mobile app or WiFi/Bluetooth connectivity. It is a traditional ceiling fan without smart home features.

Control Mode

The CLOE S is controlled exclusively via its included wireless remote control. This remote allows you to manage:

6 speed levels
Reversal of rotation direction (winter/summer modes)
Natural breeze mode (automatic speed variation)
Programmable timer
LED lighting with variable intensity and 3 color temperatures (3000K, 4000K, 5000K)

Important: Never use a wall switch or static dimmer to operate this fan. Only the remote control should be used, otherwise you risk voiding the warranty and damaging the DC motor.

Question 8

I can't reverse the rotation direction in summer mode of the CLOE S fan

Accepted Answer

Rest assured, reversing the direction is entirely possible in summer mode on the CLOE S fan! There are two methods to change the rotation direction:

Method 1: With the remote control

Simply press the dedicated reverse button (rotation) on the remote control. This button toggles the fan between clockwise and counterclockwise directions.

Method 2: With the physical switch

A physical switch is located on the fan's motor. You can use it to manually reverse the direction without using the remote control.

Important points

In summer mode (counterclockwise), the fan creates a downward airflow that provides a cooling effect
If the remote control is unresponsive, check that the batteries are new and that all electrical switches are turned on
Your CLOE S fan arrives already synchronized from the factory, no need for initial re-synchronization

Question 9

Why does the SULION CLOE S fan not have a switch on the motor?

Accepted Answer

That's normal. The SULION CLOE S fan is not designed with a physical switch on the motor. Control is done entirely via the provided remote control.

How it works

The wall switch powers the device (220-240V~, 50/60 Hz). It must remain permanently activated.
The remote control starts and stops the fan, and allows you to manage the 6 speeds, the "natural breeze" function, the direction reversal, and the timer.

⚠️ Important: Never connect the motor power to a dimmer, rheostat, or wall potentiometer. This would damage the motor and void the warranty. Only the remote control should operate the device.

Question 10

Which button on the remote control allows you to reverse the rotation direction of the CLOE S fan?

Accepted Answer

The SULION CLOE S fan is equipped with a rotation button on the remote control that allows you to reverse the motor's rotation direction. Simply press this button to switch between clockwise and counterclockwise modes.

The two modes

Summer mode (counterclockwise): creates a downward airflow for direct cooling
Winter mode (clockwise): pushes warm air from the ceiling down for better thermal redistribution

If you prefer not to use the remote control, the fan also has a physical switch on the motor for manual rotation direction reversal.

User manual SULION Fan : user manuals and guides in PDF

Models SULION Fan most viewed

Other categories SULION

Recent questions about Fan SULION