User manual SOLAC Deep fryer : 8 free PDF user manuals

Q: What power should be used to fry potatoes with the SOLAC FM6720 fryer?

To fry potatoes with the SOLAC FM6720 fryer, you should use the temperature setting rather than just the power. The adjustable thermostat of your appliance allows you to precisely select the optimal temperature based on the food being fried. Recommended temperature: Set the thermostat to around 180°C for potatoes. This temperature ensures quick and even cooking, with crispy potatoes on the outside and fluffy on the inside. Your FM6720 has a maximum temperature of 190°C, so this setting allows you to work slightly below this threshold for better control over cooking. Preparation and loading: Before starting, make sure the potatoes are perfectly dry and washed to prevent them from sticking together. Do not overload the fryer basket, as overloading cools the oil and affects cooking. The food should always remain fully covered by the oil. Operation: Plug in the fryer, set the temperature to 180°C, and wait for the green light to turn on to indicate that the temperature has been reached. Place the potatoes in the basket before inserting it into the fryer. When you immerse the food, the green light goes off while the oil returns to temperature, then turns back on when the temperature is stabilized. Draining: Once cooking is complete, remove the basket and hang it in the draining position to allow the oil to drain well before emptying the potatoes. The power of 1500 to 2000 W of your fryer ensures a rapid temperature rise and optimal maintenance during cooking.

Q: What is the maximum power of the SOLAC FM6720 fryer?

The maximum power of the SOLAC FM6720 fryer is 1400 watts. This power allows for quick and efficient cooking of food while ensuring controlled energy consumption. To optimize the performance of your fryer: Use the maximum power when you want to quickly fry large quantities of food. Adjust the power according to the type of food and quantity to avoid overheating or undercooking. Always follow safety instructions when using at full power.