Why doesn't the GARDENA 61005 inox automatic pump start after winter?

Question

Accepted Answer

If your GARDENA 61005 inox automatic pump does not start after the winter period, several causes may be responsible. Here are the steps to check to resolve this issue:

1. Check the power supply

Make sure the pump is properly plugged in and that the electrical outlet is working.
Check that the power cable is not damaged.

2. Inspect the pump and components

Check that the pump is not blocked by debris or deposits accumulated during winter.
Ensure that the turbine spins freely.
Check that the suction filter is clean and unobstructed.

3. Frost protection

If the pump has not been drained or protected against frost, residual water may have frozen and damaged some components.
In this case, it may be necessary to have the pump checked by a professional.

4. Restarting

After checking and cleaning the pump, try to start it under normal conditions.
If the pump still does not start, it is possible that the motor or electrical system is defective.

In summary, maintenance before and after winter is essential to ensure the proper functioning of your GARDENA pump. Clean the pump thoroughly, protect it from frost, and regularly check its condition to avoid this type of problem.

User manual GARDENA Pumps : user manuals and guides in PDF

Models GARDENA Pumps most viewed

Other categories GARDENA

Recent questions about Pumps GARDENA