What does error code E02 mean on the TEKA LI5 1280 washing machine and how can it be resolved?

Q: What does error code E02 mean on the TEKA LI5 1280 washing machine and how can it be resolved?

The error code E02 indicates a water filling problem on your TEKA LI5 1280 washing machine. The machine is unable to fill with water properly. Here are the checks to perform in order: Step 1 - Check the water supply Make sure the water supply tap is fully open Check that the water supply hose is not kinked, bent, or blocked Consult the installation to ensure that the drainage connection is at the correct height (minimum 50 cm) Step 2 - Check the inlet filter Close the water supply tap Unscrew the supply hose at the back of the machine Check that the anti-sand filter is not clogged or blocked Clean it if necessary with water or a cloth Reattach the hose Step 3 - Check the filter compartment Inspect the filter compartment for foreign objects (lime, debris) that could obstruct the water flow Clean or replace the filter if necessary If after these checks the E02 code persists, contact the authorized TEKA technical service. The problem may be due to a defective filling solenoid valve or a damaged water level sensor, requiring professional intervention.

Question

Accepted Answer

The error code E02 indicates a water filling problem on your TEKA LI5 1280 washing machine. The machine is unable to fill with water properly. Here are the checks to perform in order:

Step 1 - Check the water supply

Make sure the water supply tap is fully open
Check that the water supply hose is not kinked, bent, or blocked
Consult the installation to ensure that the drainage connection is at the correct height (minimum 50 cm)

Step 2 - Check the inlet filter

Close the water supply tap
Unscrew the supply hose at the back of the machine
Check that the anti-sand filter is not clogged or blocked
Clean it if necessary with water or a cloth
Reattach the hose

Step 3 - Check the filter compartment

Inspect the filter compartment for foreign objects (lime, debris) that could obstruct the water flow
Clean or replace the filter if necessary

If after these checks the E02 code persists, contact the authorized TEKA technical service. The problem may be due to a defective filling solenoid valve or a damaged water level sensor, requiring professional intervention.

User manual TEKA Washing machine : user manuals and guides in PDF

Models TEKA Washing machine most viewed

Other categories TEKA

Recent questions about Washing machine TEKA