How to display power in watts with the PIONEER SBTPM80?

Q: How to display power in watts with the PIONEER SBTPM80?

The SBTPM80 does not have a built-in display screen . It is a pedal sensor that sends power data to a compatible cyclometer. To see your watts, you need to connect the sensor to one of the following devices: The SGX-CA500 from Pioneer (official cyclometer) - this is the best choice to utilize all the features of the sensor Any compatible cyclometer ANT+ or Bluetooth Low Energy (Garmin, Wahoo, Bryton, etc.) Once your cyclometer is paired with the SBTPM80: The sensor transmits power in real-time via ANT+ or BLE You will see the watts (and other data such as cadence and efficiency) on the cyclometer's screen Refer to your cyclometer's manual to configure the power display If you still do not see the watts after pairing, check that the cyclometer properly detects the sensor and that the LEDs of the transmitters light up green (pedal monitoring mode).

Question

Accepted Answer

The SBTPM80 does not have a built-in display screen. It is a pedal sensor that sends power data to a compatible cyclometer.

To see your watts, you need to connect the sensor to one of the following devices:

The SGX-CA500 from Pioneer (official cyclometer) - this is the best choice to utilize all the features of the sensor
Any compatible cyclometer ANT+ or Bluetooth Low Energy (Garmin, Wahoo, Bryton, etc.)

Once your cyclometer is paired with the SBTPM80:

The sensor transmits power in real-time via ANT+ or BLE
You will see the watts (and other data such as cadence and efficiency) on the cyclometer's screen
Refer to your cyclometer's manual to configure the power display

If you still do not see the watts after pairing, check that the cyclometer properly detects the sensor and that the LEDs of the transmitters light up green (pedal monitoring mode).

User manual PIONEER Meter : user manuals and guides in PDF

Models PIONEER Meter most viewed

Other categories PIONEER

Recent questions about Meter PIONEER