Q: How to exit special function mode?

To exit special function mode on your Nespresso Vertuo Plus BNV420 , press the button and the lever down simultaneously for 3 seconds . The machine will then display a steady green light , indicating that it has returned to normal mode and is ready to use. This special function mode is activated when you want to perform special operations such as automatic cleaning, descaling, factory reset, or draining the system. You access it by also pressing the button and the lever together for 3 seconds. The indicator lights help you identify the active mode: Steady orange : you have accessed the special functions menu Flashing orange : a special function is in progress (cleaning, descaling, etc.) Flashing green : preheating phase Steady green : machine ready to use If your machine displays a flashing orange light, wait for the ongoing function to finish (it stops automatically), then press the button and the lever together for 3 seconds to exit special functions and return to normal mode. Important: you can exit special function mode at any time, even if a function is in progress. This action immediately interrupts the active function and puts the machine back in ready-to-use mode.

Q: Where is the delayed automatic start button located?

On your BREVILLE the Luxe Brewer Thermal BDC465, the delayed automatic start button is located at point D on the front control panel , right next to the Settings button. Precise location: Positioned to the left of the SELECT dial In immediate proximity to the Settings button Part of the main control group, near the LCD display How to use it: Press the delayed automatic start button once after preparing the coffee maker (water, ground coffee, carafe installed) The LCD screen will display the hour setting flashing Turn the selection dial to choose the desired start time Press the dial to confirm the time (the machine will emit a sound signal) Turn the dial to choose the brewing mode, then the machine will automatically start at the programmed time Important: The coffee maker's clock must be set first before using the delayed automatic start function. If you have not set the time, the machine will continue to flash without confirming your settings. Note that the clock resets every time you unplug the device.

Question 1

What does the flashing red light on my Nespresso Vertuo Plus mean?

Accepted Answer

The flashing red light on your Nespresso Vertuo Plus BNV420 indicates different conditions depending on the flashing pattern. Here’s how to interpret each signal.

Flashing red light twice then steady green
This pattern signals that the water tank is empty or a capsule is missing. To resolve this issue, fill the tank with fresh drinking water and ensure that a new Nespresso Vertuo capsule is inserted into the machine head before pressing the button again.

Flashing red light three times every 2 seconds then steady red
This pattern indicates that the machine head is in an unknown position. The machine cannot start. To correct this, lift the lever up and wait for the head to stop completely. Check that no obstacles are blocking the movement. Empty the used capsule container if necessary. Then press the lever down to fully close the machine head.

Pulsing red light or slowly fading
This signal means that the machine is cooling down after overheating. This is normal operation. The machine will automatically cool down and the light will turn green and steady when it is ready. Wait a few minutes before starting another extraction.

Steady and fixed red light
This pattern indicates an internal error of the machine. To attempt to correct the issue, turn off the machine by pressing the lever down for 3 seconds. Unplug the power cord and wait 15 minutes for the machine to cool down completely. Then plug the cord back in and turn the machine on by pressing the lever down. The machine will heat up and the light will turn steady green when it is ready. If the problem persists after this reset, contact the Nespresso Club.

Continuously flashing red light
This signal indicates an active error condition. Turn off the machine immediately, unplug it from the outlet, and let it cool for 15 minutes. Then plug it back in and try again. If the red light reappears, it means the machine has a problem requiring professional intervention. Contact the Nespresso Club or an authorized Nespresso representative.

Question 2

How to exit special function mode?

Accepted Answer

To exit special function mode on your Nespresso Vertuo Plus BNV420, press the button and the lever down simultaneously for 3 seconds. The machine will then display a steady green light, indicating that it has returned to normal mode and is ready to use.

This special function mode is activated when you want to perform special operations such as automatic cleaning, descaling, factory reset, or draining the system. You access it by also pressing the button and the lever together for 3 seconds.

The indicator lights help you identify the active mode:

Steady orange: you have accessed the special functions menu
Flashing orange: a special function is in progress (cleaning, descaling, etc.)
Flashing green: preheating phase
Steady green: machine ready to use

If your machine displays a flashing orange light, wait for the ongoing function to finish (it stops automatically), then press the button and the lever together for 3 seconds to exit special functions and return to normal mode.

Important: you can exit special function mode at any time, even if a function is in progress. This action immediately interrupts the active function and puts the machine back in ready-to-use mode.

Question 3

Where is the delayed automatic start button located?

Accepted Answer

On your BREVILLE the Luxe Brewer Thermal BDC465, the delayed automatic start button is located at point D on the front control panel, right next to the Settings button.

Precise location:

Positioned to the left of the SELECT dial
In immediate proximity to the Settings button
Part of the main control group, near the LCD display

How to use it:

Press the delayed automatic start button once after preparing the coffee maker (water, ground coffee, carafe installed)
The LCD screen will display the hour setting flashing
Turn the selection dial to choose the desired start time
Press the dial to confirm the time (the machine will emit a sound signal)
Turn the dial to choose the brewing mode, then the machine will automatically start at the programmed time

Important: The coffee maker's clock must be set first before using the delayed automatic start function. If you have not set the time, the machine will continue to flash without confirming your settings. Note that the clock resets every time you unplug the device.

Question 4

How to print the manual in English?

Accepted Answer

The manual for the Breville the Luxe Brewer Glass BDC415 is available in English on notice-facile.com. To print the manual in English, start by accessing the English version by clicking on the language link EN (English) at the top of the page.

Once on the English manual page, you have two options to print the complete document (72 pages):

Option 1 - Print directly from the online viewer: Click on the View Manual button to open the English PDF in the built-in viewer. Use the keyboard shortcut Ctrl+P on Windows or Cmd+P on Mac to access the print menu. Select your printer and click Print to start printing.

Option 2 - Download the English PDF and then print: Click on the Download button to save the English manual to your computer. Open the file with your usual PDF reader (Adobe Acrobat, built-in Windows reader, or other). Go to the File menu and select Print to print all pages or a specific range as needed.

No registration is required to access and download the manual in English on notice-facile.com.

User manual BREVILLE Coffee machine : user manuals and guides in PDF

Models BREVILLE Coffee machine most viewed

Other categories BREVILLE

Recent questions about Coffee machine BREVILLE