Nespresso Vertuo Next Deluxe BNV570 - Coffee machine BREVILLE - Free user manual and instructions

USER MANUAL Nespresso Vertuo Next Deluxe BNV570 BREVILLE

Line drawing of a portable water dispenser with cylindrical tanks and a perforated base (no text or symbols)

* Ma machine

VERTUO

NEXT

MY MACHINE*

NESPRESSO®

User manual

Mode d'emploi

3

Manual de Usuario

34

Content Contenu

EN FR

ASSISTANCE VIDEOS ARE AVAILABLE ON WWW.NESPRESSO.COM - VISIT THE "MACHINES" SECTION

ASSISTANCE VIDÉO DISPONIBLE SUR LE SITE WWW.NESPRESSO.COM - VOUS RENDRE À LA PAGE DES MACHINES

THESE INSTRUCTIONS ARE PART OF THE APPLIANCE. Read all instructions and all safety instructions before operating the appliance.

Specifications/Spécifications 13

Emptying the system before a period of non-use, for frost protection or before a repair /

Cleaning/Nettoyage 24

Descaling/Détartrage 26

Nespresso Vertuo is an exclusive system creating a perfect coffee, from the Espresso to the large Alto, time after time. Nespresso Vertuo machines are equipped with the unique Centrifusion® technology to gently extract Alto, Mug, Gran Lungo, Double Espresso and Espresso at the touch of a button. Each extracting parameter has been carefully defined by our coffee experts to ensure that all aromas from each capsule can be extracted to give the coffee body and create an exceptionally rich and generous crema.

Office use: At least one copy of this user manual should be kept in a location available at all times to maintenance and management staff.

Important Safeguards

EN

⚠️	Is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
⚠️ WARNING	Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
⚠️ CAUTION	Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
i	Is used to provide important information not related to personal injury.When you see this sign, please take note of the advice for the correct and safe use of your appliance.

Magnets inside.

No ferromagnetic tools or erials.

When using electrical appliances, basic important safeguards should always be followed, including the following:

• Read all instructions.
• At least one copy of this manual should be kept in a location available at all times to maintenance and management staff.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• The appliance is intended to prepare beverages according to these instructions.
  • WARNING: risks of injuries if you

don't use this appliance correctly.

• This appliance should only be used for intended purpose.
• This appliance is only meant for indoor use, under non-extreme temperature conditions.
• The appliance must not be used, cleaned, or maintained by children under 8 years of age unless supervised, instructed by an adult on how to use the appliance safely, and fully informed regarding the dangers involved.
• Keep appliance, power cord and capsule holder out of reach of children.
• This appliance may be used by persons with reduced physical, sensory or mental capabilities, or whose experience or knowledge is not sufficient, provided they are supervised or have received

instruction to use the device safely and understand the dangers.

• Only use capsules intended for this appliance: If the capsule does not fit, do not force the capsule into the appliance.
• WARNING: to avoid the risk of injury, do not open the brew chamber during the brew process.
• Machine contains magnets.

Avoid risk of fatal electrical shock and fire to protect against fire, electric shock and injury to persons.

• If the supply cord or the plug are damaged, they must be replaced by the manufacturer, its service agent or similarly qualified persons.
• If the supply cord or the plug are damaged, do not operate the appliance. Only return the appliance

to the Nespresso Club or to a Nespresso authorized representative.

• To disconnect, turn machine "OFF", then remove the plug from the outlet.
  • To avoid hazardous damage, never place the appliance on or beside hot surfaces such as radiators, stoves, ovens, gas burners, open flames, or similar.
• Do not touch hot surfaces. Use handles or knobs.
• Disconnect from outlet before cleaning. Allow to cool before adding or removing parts, and before cleaning the appliance.
• Do not use any strong cleaning agent or solvent cleaner.
• Use a damp cloth and mild cleaning agent to clean the surface of the appliance.
• Do not use a steam or pressure cleaner to clean the appliance. This

EN

Other Safeguards Important Safeguards

will damage the appliance and may create a life-threatening hazard.

• Always follow the cleaning instruction to clean your appliance.
• Never immerse the cord, plug, appliance or any part of it in water or any other liquid.
• Electricity and water together are dangerous and can lead to fatal electric shocks.
• Do not put anything else than specified capsules into any openings, doing so may cause fire or electric shock!
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury.

Avoid possible harm when operating the appliance.

• Risk of scalding by hot liquids. If the machine is forced open hot liquids and coffee grounds may splash. Always lock the system completely and never open it during operation.
• Be careful, capsule is hot. Risk of

scalding. If a capsule is blocked in the capsule compartment, turn the machine off and unplug it before any operation. Call the Nespresso Club or Nespresso authorized representative for assistance.

When using electrical appliances, important safeguards should always be followed, including the following:

• The important safeguards are part of the appliance. Read the important safeguards provided with the appliance carefully prior to first use. Keep them in a place where you can find and refer to them in the future.
• Protect the appliance from direct sunlight, water splash and humidity.
• This appliance is intended to be used in households and hospitality applications such as: staff kitchen areas, offices and other working environments, farm houses; by clients in hotels, motels and other residential environments; bed and breakfast type environments.
• Close supervision is necessary when the appliance is used by or near children.
  • Children shall not play with the appliance.
  • The manufacturer accepts no responsibility for and the warranty

will not apply to any commercial use, inappropriate handling or use of the appliance, damage resulting from use for other purposes, faulty operation, non-professional repairs or failure to comply with the instructions.

Avoid risk of fatal electrical shock and fire to protect against fire, electric shock and injury to persons.

• In case of emergency: immediately remove the plug from the power outlet.
- Only plug the appliance into suitable, easily accessible, grounded outlets. Make sure that the voltage of the power source is the same as that specified on the rating plate. The use of an incorrect voltage or frequency of electricity voids the warranty.
• The appliance must only be connected after installation.
- Do not pull the cord over sharp edges, clamp it or allow it to hang down.

• Keep the cord away from heat and moisture.
• If an extension lead is required, use only a grounded power cord with a conductor cross-section with matching input 16 AWG (1.3 mm ^2 ).
  • Always place the appliance on a horizontal, stable, hard, even surface that does not allow for water accumulation under the machine.
• The surface must be resistant to heat and fluids, like water, coffee, descaler or similar.
• Disconnect the appliance from the power outlet when not in use for a long period of time.
• Disconnect by pulling out the plug; do not pull on the cord itself to avoid damage.
• Never touch the cord with wet hands.
• Never put the appliance or part of it in a dishwasher.
• Do not open the appliance. Hazardous voltage inside!
• Do not dismantle the appliance.

Avoid possible harm when operating the appliance.

• Never leave the appliance unattended during operation.
• Do not use the appliance if it is damaged or not operating perfectly. Immediately remove the plug from the power outlet.
• Contact the Nespresso Club or Nespresso authorized representative for examination, repair or adjustment.
  • A damaged appliance can cause electric shocks, burns and fire.
• Do not put fingers under coffee outlet; risk of scalding.
• Do not insert fingers into capsule compartment when machine head is closing; risk of injury.
• Do not put fingers into the capsule compartment or capsule shaft; risk of injury!
  • Water could flow around a capsule when not perforated by the blades and damage the appliance.

• Be careful not to injure yourself on sharp points or trap your fingers when reaching inside the machine.

• Beware of hot liquids when reaching inside the machine.

• Never use an already used, damaged or deformed capsule.
  • Always fill the water tank with fresh drinking water.
• Do not use any other liquids (such as cow's milk, soya milk, enriched milks, flavoured liquids, etc.).
• Do not overfill water tank.
• Empty water tank if the appliance will not be used for an extended time (holidays, etc.).
• Replace water in water tank when the appliance is not operated during a weekend or a similar period of time.
• Do not use the appliance without a cup placed at the suitable level and ensure the cup support is in place after any usage, to avoid spilling any liquid on surrounding surfaces or connector.
• Do not pour water or other liquids into the brewing unit.

• Keep appliance, capsules and accessories out of reach of children.

• This appliance is designed for Nespresso Vertuo coffee capsules available exclusively through the Nespresso Club or your Nespresso authorized representative.

• All Nespresso appliances pass stringent controls.
• Reliability tests under practical conditions are randomly performed on selected units. Some units can therefore show traces of previous use.
• Nespresso reserves the right to change instructions without prior notice.

Short cord instructions.

- Use the power cord supplied with the device in an unmodified form. It is important for user safety that the appliance is only used with a suitably grounded electrical supply.

a) A short power supply cord or detachable power supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.

EN Other Safeguards

The appliance is provided with an attached cord.

b) Extension cords are available and may be used if care is exercised in their use.
c) If a long detachable power cord or extension cord is used:
1) The marked electrical rating or the detachable power cord or extension should be at least as great as the electrical rating of the appliance.
2) The longer cord should be arranged so that it will not dangle over the countertop or tabletop, where it can be pulled on by children or tripped over.
3) The appliance is grounded and only grounded extension cord should be used (type 3-wire cord).

• The appliance has a grounded plug (two blades and one round pin).
- To reduce the risk of electric shock, this plug is intended to fit into a grounded outlet only one way.
- If the plug does not fit fully into the outlet, reverse the plug.
• If it still does not fit, contact a

qualified electrician.

- Do not attempt to modify the plug in any way.

Descaling

• The descaling solution can be harmful. Avoid contact with eyes, skin and surfaces.
• Nespresso descaling agent, when used correctly, helps to ensure the proper functioning of your machine over its lifetime and that your coffee experience is as perfect as on the first day. For instructions on how to descale, consult the section "Descaling" in the Quick Start Guide.
• Any servicing other than cleaning and user maintenance should be performed by an authorized service representative.

NOTE: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

SAVE THESE INSTRUCTIONS

Pass them on to any subsequent user. This Instruction Manual is also available as a PDF file at nespresso.com

Précautions importantes

FR

i Please remember that the Bluetooth® mode must be activated beforehand on your smartphone or tablet. To benefit from all features, pair your machine with your smartphone or tablet and connect it to Wi-Fi, following the instructions via the App.

①②Rinse and clean the water tank and the lid before filling it only with fresh drinking water. Put the water tank in place and make sure it's properly attached.

Line drawing of a kitchen appliance with buckets, a lid, and a textured base (no text or symbols)

Ensure the capsule container and the cup support (if necessary for the selected cup size) are in place. For your safety, operate the machine only with cup and capsule container in position.

③ Plug in the power cord.

4 - For an optimized heating time, close and lock the machine to turn the machine ON. - If the machine is already closed and locked, turn the machine ON by pressing the button.

5 Light will blink while the machine is heating up. Steady light indicates the machine is ready.

6 Place a container of at least 34 fl oz. / 1 L under the coffee outlet.

Technical line drawing of a mechanical device with cylindrical and rectangular components (no text or symbols)

⚠️ Make sure no capsule is inserted during the cleaning process.

7 Make sure that the machine is still locked. Press the button 3 times within 2 seconds to start cleaning and let the cleaning procedure complete automatically. It will take less than 2 minutes before start of the flow.

8 This operation may take up to 7 minutes. The procedure can be stopped at any time by pushing the button. Once the cleaning is finished, a steady light will appear on the machine. In case you want to resume the cleaning process, push the button again.

When interrupting the cleaning procedure, the machine may not stop immediately. Never open the machine during the cleaning procedure.

① Fill the water tank with fresh drinking water and place it into its position.

Line drawing of a mechanical device with ports and a directional arrow (no text or symbols)

3 Light will blink while the machine is heating up. Steady light indicates the machine is ready.

4 The factory settings for the coffee sizes are the following. Please make sure your recipient is big enough to prevent overflow. Alto: 14 fl oz. / 414 ml

Mug: 7.77 fl oz. / 230 ml

Gran Lungo: 5.07 fl oz. / 150 ml

Double Espresso: 2.7 fl oz. / 80 ml

Espresso: 1.35 fl oz. / 40 ml

5 Adjust position in height of the cup support. The cup support has 3 positions and can be temporarily removed to accommodate various cup sizes. Make sure the cup support is properly secured.

Three-panel line drawing showing a coffee maker with a cup, a coffee mug, and a coffee cup on a stand (no text or symbols)

Technical illustration of a microwave oven with a circular dial and mechanical components (no text or symbols)

7 This machine operates with Nespresso Vertuo capsules. Nespresso classic capsules cannot be used in this machine.

8 Insert a capsule with the dome shape at the bottom. Be careful not to injure yourself on sharp points or trap your fingers when reaching inside the machine.

Illustration of a coffee maker with a circular dial and mechanical components (no text or symbols)

NOTE: ensure that no capsules are lying on the machine top before closing the head. If capsules are lying they should be removed and the capsule container should be emptied.

10 Place a cup of sufficient capacity under the coffee outlet. Risk of scalding may occur due to overflowing.

1 Push the button to start the coffee preparation. It will take some time before the coffee flow comes out (due to barcode reading, coffee pre-wetting and infusion time).

NOTE: the machine will automatically recognize the inserted capsule and select the coffee preparation parameters and cup length defined by Nespresso coffee experts to extract the coffee blend at its best.

NOTE: you can do this even when the machine is still heating up. The coffee will then flow automatically when the machine is ready.

To stop the coffee flow early, push the button.

To manually top up your coffee, push the button and push again to stop when desired volume is reached.

Please wait until coffee preparation is done to unlock the handle and / or switch off the machine. Turn the handle to the right and open the head to automatically eject the capsule.

Illustration of a mechanical device with a circular dial and a separate view showing its internal components (no text or symbols)

NOTE: when interrupting the coffee flow, the machine will not stop immediately.

NOTE: top up can be activated only during 45 seconds after the end of the extraction.

The machine can be turned "OFF" at any time (when not operating) by holding the button for 3 seconds. Automatic "OFF" Mode: the machine will turn off automatically after 2 minutes of non-use.

The programming is specific to each capsule type, Alto, Mug, Gran Lungo, Double Espresso or Espresso. Cup sizes may be programmed from 0.7 fl oz. / 20 ml to 17 fl oz. / 500 ml.

Collection of simple line drawings of various household items including a helmet, mug, and cup (no text or symbols)

2 Open the machine head; insert the capsule you want to program; close the head; lock the machine.

4 Push and hold the button until desired volume is reached.

5 Water volume level is now stored for the capsule type used for the programming.

EN Reset to factory settings

Resetting to factory settings will reset all reprogrammed volumes.

Open the machine head and let the used capsule be ejected.

Close the head. Leave the handle in "UNLOCKED" position.

Fermez la tête de la machine. Laissez le levier en position «DÉVERROUILLÉE».

Push the button 5 times within 3 seconds. The button blinks 5 x orange and changes than to steady white.

①②③ Empty the water tank and put it in place.

Place a container under the coffee outlet.

Line drawing of a mechanical device with cylindrical and rectangular components (no text or symbols)

Unplug the power cord.

4 Open the machine head and let the used capsule be ejected.

⑤ Empty capsule container, the drip tray and the cup support.

6 Close the head and turn handle left until "LOCKED" position.

Technical illustration of a mechanical device with a circular inset showing a dial and a knob (no text or symbols)

8 It will take approximately 30 seconds for the machine to complete the emptying. Machine turns "OFF" automatically when machine is empty.

7 Push and hold the button while plugging the power cord. Release the button when the machine starts the emptying procedure.

CAUTION: caution should be exercised when plugging in the coffee machine with the button pressed. Small quantities of steam may emit from the machine as it evacuates the remaining liquids.

The machine has a predefined cleaning procedure that can be launched at user discretion. Office use: Daily cleaning.

① Rinse and clean the water tank and the lid before filling it with fresh drinking water. Put the water tank in place.

Line drawing of a portable electronic device with ports and a close-up view showing internal components (no text or symbols)

Technical line drawing of a mechanical device with cylindrical and rectangular components (no text or symbols)

3 Open the machine head and let the used capsule be ejected. Empty and rinse the capsule container and the drip tray.

Technical diagram of a microwave oven with labeled parts and exploded view

4 Close the head and turn handle left until "LOCKED" position. Fermer la machine et tourner la poignée jusqu'à la position «VERROUILLEE».

Technical illustration of a mechanical device with a circular inset showing a dial and arrow (no text or symbols)

5 Light will blink while the machine is heating up. Steady light indicates the machine is ready.

6 Wait for the machine to complete heating up. The light will be steady white. Push the button 3 times within 2 seconds. The button will blink quickly during the procedure. It will take less than 2 minutes before a flow comes out. The cleaning procedure will run automatically for 7 minutes.

7 The procedure can be stopped at any time by pushing the button. The button will go to a steady light. In case you want to resume the cleaning process, push the button again. To brew a coffee, open the head and insert a capsule, then close, lock the machine by turning the handle left and push the button.

CAUTION: do not use any strong or abrasive cleaning agent or solvent cleaner. Do not put in a dishwasher. Never immerse the appliance or part of it in water. Clean the coffee outlet regularly with a clean damp cloth. Please use only clean cloths for cleaning the machine.

NOTE: water may accumulate inside the machine's head during cleaning. If this happens please dry visible parts with a clean dry cloth.

NOTE: duration: approximately 20 minutes. NOTE: durée approximative: 20 minutes.

NOTE: descale mode cannot be interrupted or exited. If the machine is unplugged during the descale procedure the machine will enter the Descale Mode upon start. Both cycles, descaling and rinsing, must be repeated after this.

① Empty the drip tray and the capsule container.

Exploded view diagram of a mechanical device with cylindrical and rectangular components (no text or symbols)

Blinking light indicates the machine is heating up. When the light is steady, the machine is ready.

⑤④ Open the machine head and let the capsule be ejected.

6 Reclose the machine and leave the lever in "UNLOCKED" position, towards the front of the machine.

Illustration of a coffee maker with a circular dial and directional arrows indicating rotation (no text or symbols)

7 To enter the descaling mode, hold the button for at least 7 seconds.

8 LoBetheirmachinksby turing the yesterday. You now have 45 seconds to enter descaling mode by following the next steps, otherwise the machine will return to the ready for brewing coffee mode.

left to the lock symbol and unlock by turning right. Hold the button for at least 7 seconds in "UNLOCKED" position.

Line drawing of a mechanical device with cylindrical and rectangular components (no text or symbols)

To start descaling, lock the machine by turning the lever left to locked symbol and push on the button. The machine will stop automatically when the first phase of descaling is completed.

Line drawings of kitchen utensils including a faucet, showerhead, sink, and plate (no text or symbols)

13 Fill the water tank with fresh drinking water.

Line drawing of a hand pump device with two cups and a handle, showing internal components (no text or symbols)

- When ready, push the button to rinse the machine. Machine will stop automatically when complete.

5 The button will stop blinking rapidly and become steady. Descaling is completed. Allow the machine to dry for 10 minutes before using it.

6 The machine is now ready for use.

1. No light on the button.	- The machine has turned "OFF" automatically; push the button or "UNLOCK" the machine.	- Check the mains, plug, voltage, and fuse.
2. No coffee, no water. - Check that the water tank is filled.	- Check that a fresh capsule is inserted in correct position, that the handle is properly locked and push the button to start.	- Descale if necessary.- Open the machine head and let the capsule be ejected. Then perform a cleaning as per cleaning section.
3. Coffee is not hot enough.	- Preheat cup with hot drinking water from the tap.	- Descale if necessary.
4. The machine doesn't start and has light steady on. If blinking, see next points.	- Check that handle is properly locked.- If you want to brew a Coffee or Espresso, check that a fresh capsule is inserted in correct position, that the handle is properly locked and push the button to start.	- If you are cleaning, descaling or emptying the system, check that no capsule is inserted then close, lock the machine and push the button to start one of these operations.
5. The machine doesn't start and light blinks alternately; 1 blink and 1 pause.	- Fill the water tank and push button to start. - Check that handle is properly locked.
6. Light blinks while machine is running.	- If coffee is flowing normally, this indicates the machine is working properly.- If only water is flowing, the machine is executing a user request for either cleaning, descaling or emptying the system. Refer to the corresponding paragraph in this user manual.	- If there is no intention to clean, descale, or empty the system, then push the button to stop the machine. If the machine is still blinking, exit descaling mode by holding the button for at least 7 seconds or refer to next section. If problem persists, call Nespresso.
7. Light blinks and machine is not running.	- It will take some time before the coffee flow comes out (due to barcode reading and pre-wetting the coffee).- Check that a fresh capsule is inserted in correct position, that the handle is properly locked and push the button to start.- Fill the water tank and push button to start.	- Turn the machine to "OFF mode" by pushing the button for 3 seconds and then push it again to turn the machine "ON". Now wait approximately 20 minutes to allow the machine to cool down after extensive use.- If the machine doesn't turn "OFF" then exit descaling mode by pushing the button for at least 7 seconds.
8. Light blinks alternately 2 blinks and 1 pause continuously. Machine is not running.	- During regular Coffee/Espresso preparation: 1) Unlock the handle and open the machine head to check that a fresh undamaged capsule is inserted in the correct position. 2) Check that the handle is in "LOCKED" position. 3) Check that the water tank is filled.- During Descaling, Emptying and Cleaning: 1) Check that capsule is ejected. 2) Check that the handle is in "LOCKED" position.- During Programming Volume: 1) Check if a capsule has been well inserted. 2) Please refer to the corresponding chapter.	- If problem persists:1. Unlock the handle and open machine head.2. Replace capsule (if needed).3. Disconnect powercord from the outlet and plug the machine back into outlet after 10 seconds.4. Close the head and press the button to turn "ON" and press again to start brewing. If problem persists, call Nespresso.
9. Leakage or unusual coffee flow. - Check that the water tank is well positioned.
10. Machine turns to "OFF" mode.	- To save energy the machine will turn off after 2 minutes of non-use.	- See paragraph on "Energy Saving Concept".
11. Light alternately blinking 3 times and then steady on.	- Descaling needed: machine can be operated when alert appears only a few times after this alert before descaling becomes necessary.
12. Coffee grounds in the cup.	- Perform the cleaning procedure twice.	- See paragraph on "Cleaning".

Guide de dépannage

FR

ASSISTANCE VIDÉO DISPONIBLE SUR LE SITE WWW.NESPRESSO.COM - VOUS RENDRE À LA PAGE DES MACHINES

Should you need any additional information, in case of problems or simply to seek advice, call Nespresso.

Contact details for your nearest Nespresso can be found in the welcome material in your machine box or at nespresso.com

This appliance complies with the EU Directive 2012/19/EC. Packaging materials and appliance contain recyclable materials.

Your appliance contains valuable materials that can be recovered or can be recycled. Separation of the remaining waste materials into different types facilitates the recycling of valuable raw materials.

Leave the appliance at a collection point. You can obtain information on disposal from your local authorities.

To know more about Nespresso sustainability strategy, go to www.nespresso.com/positive

Nespresso guarantees this product against defects in materials and workmanship for a period of one year. The guarantee period begins on the date of purchase and Nespresso requires presentation of the original proof of purchase to ascertain the date. During the guarantee period, Nespresso will either repair or replace, at its discretion, any defective product at no charge to the owner. Replacement products or repaired parts will be warranted only for the unexpired portion of the original guarantee or six months, whichever is greater. This limited guarantee does not apply to any defect resulting from negligence, accident, misuse, or any other reason beyond Nespresso's reasonable control, including but not limited to: normal wear and tear, negligence or failure to follow the product instructions, improper or inadequate maintenance, calcium deposits or descaling, connection to improper power supply, unauthorized product modification or repair, use for commercial purposes, fire, lightning, flood or other external causes. This guarantee is valid only in the country of purchase or in such other countries where Nespresso sells or services the same model with identical technical specifications. Guarantee service outside the country of purchase is limited to the terms and conditions of the corresponding guarantee in the country of service. Should the cost of repairs or replacement not be covered by this guarantee, Nespresso will advise the owner and the cost shall be charged to the owner. Save in relation to losses that cannot be limited or excluded as a matter of law, performance by Nespresso of the obligations imposed on Nespresso herein shall be the full extent of Nespresso's liability under this guarantee. Except to the extent allowed by applicable law, the terms of this limited guarantee do not exclude, restrict or modify the mandatory statutory rights applicable to the sale of this product and are in addition to those rights. If you believe your product is defective, contact Nespresso for instructions on how to proceed with a repair. Please visit our website at www.nespresso.com for contact details.

5.5 in / 14 cm 12.5 in / 31.8 cm 14.7 in / 37.4 cm

Line drawing of a smart water heater with ports and control panel (no text or symbols)

Technical line drawing of a mechanical device with cylindrical and rectangular components (no text or symbols)

Illustration of a hand washing machine with a handle and control panel (no text or symbols)

Three-step line drawing of a coffee maker with a cup, side by side, and side by side (no text or symbols)

Technical illustration of a mechanical device with a circular dial and a separate view showing its internal components (no text or symbols)

Technical illustration of a mechanical device with a close-up inset showing a circular component (no text or symbols)

Technical diagram showing a device with labeled parts and a circular dial indicating a component with arrows and symbols.

Line drawing of a mechanical device with cylindrical and rectangular components (no text or symbols)

Illustration of a kitchen grater with a circular dial and a directional arrow (no text or symbols)

Line drawing of a handwashing machine with buckets and a handle (no text or symbols)

Line drawing of a mechanical device with cylindrical and rectangular components (no text or symbols)

Technical line drawing of a mechanical device with exploded view and mounting holes (no text or symbols)

Technical diagram of a device with labeled parts and a close-up view showing internal components.

Line drawing of a mechanical device with cylindrical components and labeled parts (no text or symbols)

Illustration of a kitchen appliance with a close-up view showing internal components (no text or symbols)

Line drawing of a mechanical device with cylindrical and rectangular components (no text or symbols)

Line drawings of various kitchen appliances including a faucet, showerhead, sink, and toilet (no text or symbols)

Line drawing of a handwashing machine with multiple containers and a handle (no text or symbols)