NI-WL30 - Iron PANASONIC - Free user manual and instructions
Find the device manual for free NI-WL30 PANASONIC in PDF.
| Product Type | Cordless Iron |
| Brand | Panasonic |
| Model | NI-WL30 |
| Power Supply | 1200 W |
| Soleplate Material | Ceramic coated |
| Steam Output | Continuous steam up to 20 g/min |
| Spray Function | Yes |
| Auto Shut-off | Yes, after 10 minutes of inactivity |
| Cordless Operation | Yes, with charging base |
| Water Tank Capacity | 200 ml |
| Dimensions (L x W x H) | 28 x 12 x 15 cm |
| Weight | 1.0 kg |
| Anti-Calc System | Yes |
| Self-Clean Function | Yes |
| Vertical Steam | Yes |
| Heat-Up Time | Approximately 30 seconds |
| Overheat Protection | Yes |
| Material | Plastic body with rubberized handle |
| Repairability Index | 7.5 / 10 |
Frequently Asked Questions - NI-WL30 PANASONIC
User questions about NI-WL30 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Iron in PDF format for free! Find your manual NI-WL30 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NI-WL30 by PANASONIC.
USER MANUAL NI-WL30 PANASONIC
natural_image
Line drawing of a steam iron with handle and spout (no text or symbols)39-27
الزاني
182DDQ-0N95A
natural_image
Line drawing of a steam iron with handle and spout (no text or symbols)Panasonic
Operating Instructions
(Household Use Only) Cordless Steam Iron
No. Model/Model No. NI-WL30
English
3-14
Bahasa Indonesia
15-26
182000-6N95A
Panasonic
Operating Instructions
(Household Use Only) Cordless Steam Iron
Model No. NI-WL30
Contents
| Safety precautions | 04-07 |
| Anti calc system | 07 |
| Anti-drip system (Automatic water seal) | 07 |
| Parts identification | 08 |
| How to use as a steam iron | 09-10 |
| How to use the power shot and the vertical shot | 1 |
| How to use as a dry iron | 11 |
| Fabric and ironing recommendations | 12 |
| How to care for your iron | 12 |
| Frequently asked questions | 13 |
| Trouble shooting | 13 |
| Specifications | 14 |
Thank you for purchasing this Panasonic product.
Before operating this unit, please read these instructions completely and save them for future use.
Safety precautions
To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions.
Explanation of symbols
The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
Denotes a potential hazard that could result in serious injury or death.
Denotes a hazard that could result in minor injury or damage your bearings.
The following symbols are used to classify and describe the type of instructions to be observed.
This symbol is used to alert users to a specific operating procedure that must not be performed. This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely.
WARNING
To reduce the risk of personal injury, electric shock or fire, please observe the following:
Do not use when the power plug or power cord is damaged or hot. Never use the iron if the power plug fits loosely in a household outlet.
Do not leave the iron unattended while it is connected to the outlet.
Do not leave the iron unattended while it is connected to the outlet.
Do not connect or disconnect the power plug to a household outlet with wet hands.
Do not damage, modify, forcibly bend, pull, or twist the power cord. Do not place anything heavy on or pinch the power cord.
Do not wrap the power cord around the iron when storing.
Do not use with the power cord bundled.
Do not use the iron with wet hands.
Do not use in proximity of flammable materials (such as benzine or the like).
Do not allow the power cord to touch hot surfaces of the iron.
Never modify, disassemble, or repair.
- Doing so may cause ignition or injury due to abnormal operation. Contact an authorized service center for repair.
WARNING
Do not immerse the iron in water or other liquids.
Do not supply water to the unit directly from the faucet.
- Doing so may cause bums, electric shock or fire due to a short circuit.
The iron is not to be used if it has been dropped, and there are visible signs of damage or if it is leaking.
- Refer servicing to authorized service personnel.
To reduce the risk of personal injury, electric shock or fire, please observe the following:
The iron must only be used with the power base provided.
When the iron is not in use, always place the iron securely into the power base.
- Failure to do so may cause the product to fall, fire, injury or burn.
Always ensure the appliance is operated on an electric power source matched to the rated voltage indicated on the iron. Fully insert the power plug.
The power plug must be unplugged before filling water to the water tank.
! Regularly clean the power plug to prevent dust from accumulating.
- Disconnect the power plug and wipe with a dry cloth.
Immediately stop using and unplug the power plug if there is an abnormality or malfunction. Examples of abnormalities:
The iron stops occasionally, the power cord or the power plug is abnormally hot or discolored. The iron is deformed or smells of burning. Refer servicing to authorized service personnel.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance. Failure to do so may cause an accident or injury
The Iron head must be firmly rested on the power base, and the power base must be placed on a flat and stable surface. When this product is used as a horizontal steam iron, the iron must be used and rested on a flat, stable surface.
- The soleplate may be scratched, or even injuries or scald may be caused if the iron head falls over.
If the power cord is damaged, it must be replaced by the manufacturer, its service center, or similarly qualified persons in order to avoid a hazard.
- Failure to do so may cause an accident or injury.
CAUTION
To reduce the risk of personal injury, property damage, electric shock or fire, please observe the following:
Do not touch the hot surface (such as soleplate, and the hot surface around it).
Do not touch the steam or "power shot" during use.
- When using an ironing board through which steam can penetrate, do not put your hand, leg, etc., under the ironing board.
- Do not aim the steam towards your hand, knee, or any other part of the body.
- Do not use steam or "power shot" when the iron is partially sticking out from the ironing board.
• Do not iron the clothes that you are wearing.
Do not insert pins or needles into the iron or use it on clothes with sewing needles or the like inserted.
Do not put the soleplate too close to you or others since steam may unexpectedly erupt from it.
Do not use the iron with the exception of fabric.
Do not store the iron until it has fully cooled down.
Do not store the power cord coiled with sharp angles.
- This may damage the cord.
Do not repeatedly and quickly press the power shot button.
- If repeating operation over an interval of less than 2 seconds, burns due to hot water leaks may result.
Do not add perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. (Only use normal temperature tap water in the iron.)
- Doing so may cause scalds or getting dirty due to the damage product.
If the shot intensity becomes low, do not operate the power shot button.
- Doing so may cause burns due to hot water leaks.
Do not tilt or violently move the iron back and forth.
- Doing so may cause burns due to hot water leaks.
Do not use any ironing accessories available on the market.
- Doing so may cause burns or damage to cloth due to incorrect operation.
Do not use the iron near walls or furniture that cannot withstand high temperature or humidity.
- Doing so may damage the wall or furniture.
Do not use the iron in opposite.
- Doing so may cause burn due to water leak by wrong operation.
CAUTION
To reduce the risk of personal injury, property damage, electric shock or fire, please observe the following:
Use a dry iron on moist clothing (spray misted).
! Disconnect the power plug by holding the wire instead of pulling on the power cord.
- Failure to do so may break the power cord, and may cause burns, electric shock, or fire due to a short circuit.
When using with following fabric, test on an inconspicuous area, or place a cloth over the fabric to prevent the fabric from marking.
• Expensive or specially processed fabrics (velvet, acrylic, nylon, cashmere, etc.)
- Fabrics that are labeled as "low heat" or
"medium heat", or dark colored fabrics.
Drain water from the water tank after use. - Failure to do so may cause the water to leak out from the soleplate when the iron is used next time.
Always unplug the power plug during not in use. - Failure to do so may cause fire, electric shock.
Anti calc system
- The built-in anti calc system in the water tank continuously reduces scale build up in the vaporizing
Reduces some build up in the vaporizing chamber of the iron. This system makes it possible to use the steam function for a long period of time and prevents steam vents from clogging. - Ordinary water can be used in this iron for a long time, and steam function doesn't weaken.
Anti calcium cassette (In the water tank)
Anti-drip system (Automatic water seal)
Auto-valve system built-in the soleplate, when the temperature of the soleplate drops below 110°C. The valve for the vaporizing camber in the iron automatically
vaporizing caliber in the iron automatically closes and stops the water from going in further. This prevents water from spiting out the soleplants, slaining the clothes. Besides it is unnecessary for you to heat the soleplate again and it will automatically dry, store the iron when it cooled.
Auto-valve system
Parts identification
Power shot button
⑬ Temperature select button
Handle
① Water tank release button
Thermostat operating
indicator light
Water tank
Fabric guide chart
Power base
① Maximum water level
indicator("MAX" line)
Power plug
Plug type may vary
comply with respective
supply or major
requirement
Power cord
D Soleplate
& Water fill cover
N Steam/dry selector
① Temperature select button
Cordless irons
Once an iron is placed on a power
base, the power base starts working and
transfers the heat to the iron
The iron retains heat to be used for ironing.
The temperature of the iron gradually
decreases during use, so place the iron back on the power
base to reheat it whenever you are not ironing. (ex: when setting garments on the ironing board, etc.)
bys
B
13
the
The
der
1
17,40
set
How to use as a steam iron
Make sure the iron is turned off and the power cord is unplugged from the household outlet. The iron can be filled with the water tank in place or removed.
-
Confirm that the steam/dry selector is moved to the "Dry" position when installing or removing the water tank.
-
Remove the water tank by pressing
the release button.
① Push the release button
② Remove the water tank.
- Open the water fill cover. Fill the water tank up to the "MAX" line.
- Close the water fill cover. Re-install the water tank into the main unit. Push it until a click sound Is heard.
Notes:
- Do not plug the power cord into an outlet while filling the
water tank. -
Do not overfill the water tank. Check the water level with the
water tank held in its vertical position
• Use pure tap water
• Falling off may cause crack in the water tank which will result in water leakage. Please be careful. -
Plug the power cord into an electrical outlet.
Set the Iron on the power base securely
Set the temperature select button to
the "2" or "3"
The thermostat operating indicator light switches on.
Notes:
- When using the steam, please set the temperature select scale to "2" or "3".
- For high steam, please set to "3". Low temperature will
lead to water leakage -
Do not leave the iron unattended while it is connected to the electrical source
sure select
(五) 对称关系
rature w
(1) 本次股东大会
nected to -
a) Preheat the iron until the thermostat operating
Indicator light goes out.
(When the iron is
placed on the
power base during
use, it is reheated
as long as the
temperature decreases.)
Move the steam/dry selector, select steam quantity;
and start to iron.
ating
单位：
[Non-Text]
(1) 本次股东大会审议并通过了《关于公司2017年度利润分配预案》
Temperati
select scal
[Non-Text]
(五)审议批准
quantity;
(1)基因通过控制 通过控制
ches on.
m = 311
m = 311
m = 311
m = 311
m = 311
1
1.
Col
On
-
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
c) Please confirm the water volume during use. Pull out the plug before refilling the iron according to the step 1-4.
Notes:
- The iron should be set on the power base securely when connecting to power supply. While not in use, please set back on the power base to maintain the selected temperature. Just put the iron into power base, don't put it at other place.
- This iron must only be used with the power base provided. - When there is insufficient steam emitted during use, set the iron back on the power base to reheat it for approx. 30 seconds.
Steam/dry selector (switch as the following)
Dry | Low steam | High steam
Low steam: for thin or delicate fabrics that require small amount of steam.
High steam: for fabrics that require high amount of steam (i.e.thick materials, items with stubborn wrinkles.)
After use
- After ironing, slide the temperature select button to "0", pull out the plug. Move the steam/dry selector to "Dry" position.
- Press the water tank release button, take out the water tank. Empty water from the water tank.
- Re-install the water tank, keep the steam/dry selector in the "Dry" position.
How to use the power shot and the vertical shot
For fabrics of thick materials and with stubborn wrinkles, and cleaning the steam vents at the same time.
-
Keep the steam/dry selector in the "Dry" position and set the temperature select button to "3", or some hot water will drop from the iron.
-
Pump the power sho button several times before using for the first at each ironing session.
• The interval of pumping for the power shot should not be shorter than 2 seconds to avoid
2 seconds to avoid hot water dripping from the soleplate.
- When the steam does not come out sufficiently at the beginning of use, pump the power shot button several times until the steam comes out.
When using the vertical shot
Hang the garment on a clothes hanger. Hold the iron away from your body, close to but not touching the fabric. Pull the fabric tight with your free hand and pump the power shot button 2-5 seconds interval.
Notes:
- Never iron clothes on the body or point your iron at anyone when steaming.
- When steam does not come out enough during use, set the iron back on the power base to reheat it for approx. 30 seconds.
How to use as a dry iron
- Move the steam/dry selector to the "Dry" position.
- Set the iron on the power base securely, plug the power plug into an electrical outlet.
- According to «Fabric and ironing recommendations» slide the temperature select button to the desired position.
Preheat the iron until the thermostat operating indicator light pass out, and start to iron. - After ironing, set the Iron back to the power base and pull out the plug. Then store the Iron at safe place.
Fabric and ironing recommendations
 |
Notes:
• For heat-sensitive fabric, use a press cloth on top of fabric,
otherwise it will ruin or damage.
- Iron blended fabrics, setting the temperature according to lower temperature fiber
lower-temperature fiber.
- Iron clothes with worse heat resistance first while ironing the different kinds of cloth.
How to care for your iron
▶ Surface of the iron
• After unplugging and
cooling the iron, simply
wipe with a damp cloth
and if necessary, use a
neutral detergent
- Never use any
strong cleaners
▶ Soleplate
• Starch and other residue may be easily removed from the
soleplate with a damp cloth.
• To avoid scratching the surface, never use a metallic pad to
clean the soleplate, and never place the iron on a rough
surfac
• The best way to remove synthetic residue from the soleplate
is to iron over an old cotton cloth rag after heating the iron.
Notes
• Never use cleaners or steam iron detergent in the iron, since
they may damage the working parts of the iron.
• Some odor may be released during initial use of the iron
however, this is normal and the odor will not attach to your
clothe
Self-cleaning
Cleaning the steam chamber of soleplate
and steam vents with power shot, according
to «How to use the power shot and the
vertical shot»(P11). pump the power shot
button several times until steam is invisible.
Frequently asked questions
Question Answer
Why click sound or
metallic sound be heard
while using or shaking the
iron?
These sounds are made by
the internal parts of the iron,
leakage prevention, etc
moving slightly. This is
normal.
Why do the clothes
sometimes become
brown after being ironed?
m = 311
If there is laundry detergent
remaining on the fabric, the
clothes may become brown
after being ironed
Why are there while
powder/particles coming
out of the steam vents
while using the steam
function (especially when
using "power shot")?
The powder/particles are
hydrophilic treatment or
impurities and minerals
found in hard water, etc.
These are not harmful an
can be brushed off cloth
Trouble shooting
Problem Causes, Solution
No heating
Make sure the power plug is fully plugged into a household outlet or the power base.
- Into a household outlet of the power base.
Fill the water tank with tap water up to
maximum water level indicator.
If there is no steam, set the steam/dry
▶ selector to the steam position, or set the
temperature select button to "3"
For poor steam, move the steam/dry
For post-steam, move the steamfully selector several times, then reset to
- oblique several times, then reset to the steam position, set the temperature select
steam position, set the temperature select button to *3*
Well until the thermocrit operating indicator
▶ Light goes off before using the iron
right goes on others using the iron.
Press the power shot button several times
when the power shot appears insufficient.
When use the shot, set the temperature
select button to "3" and set the steam/dry
selector to the dry position.
From the perception button in irtopole of
Press the power shot button in intervals of at least 2.5 seconds when using the
at least 2-5 seconds when using the "severable"
power shot.
Make sure the temperature select button
is on "3"
Empty the water tank and fill it with clean
water. If use a container to fill the water,
use the clean one. There may be
contaminants in the iron.
Specifications
| Model No. | NI-WL30 |
| Power source [Indonesia] | 220 V ~ 50 Hz |
| Power source [except Indonesia] | 220-240 V ~ 50-60 Hz |
| Power consumption [Indonesia] | 1 200 W |
| Power consumption [except Indonesia] | 1 300-1 550 W |
| Weight (approx.) | 0.9 k_a |
| Weight (with power base) (approx.) | 1.5 k_a |
| Water tank capacity (approx.) | 120 mL |
| Steam generations way | Drop |
| Power cord length 1.5 m | |
| Thermostat | Temperature range: "1"-3" (120-205°C) |
| Stand mode Power base | |
| Lamp Temperature select indicator | |
| Dimension (approx.) (WxDxH) 290 × 160 × 200 mm | |
14
This iron is intended for household use only.
Panasonic
Petunjuk Penggunaan
No. Reg: I.38.PGI1.00208.0119
Tindakan Pengamanan
A Tombol semburan uap
B Tombol pilih suhu
C Handel
Tombol lepas tangki air
Lampu Indikator operasi
termostat
F Tangki air
C. Bagan panduan kain tenun
H Basis daya
① Indikator level air maksimum
maksimum (garis " MAX ")
Colokan
Jenis colokan
bervariasi sesuai
m = 311
-
[Non-Text]
•
1
•
一
1
5
1
1
3
广力云
[Non-Text]
[Non-Text]
[Non-Text]
-
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
- Panasonic
- Contents
- Safety precautions
- Explanation of symbols
- WARNING
- CAUTION
- Anti calc system
- Anti-drip system (Automatic water seal)
- Parts identification
- ① Temperature select button
- Cordless irons
- How to use as a steam iron
- Notes:
- Steam/dry selector (switch as the following)
- After use
- How to use the power shot and the vertical shot
- How to use as a dry iron
- How to care for your iron
- ▶ Soleplate
- Notes
- Self-cleaning
- Frequently asked questions
- Question Answer
- Trouble shooting
- Problem Causes, Solution
- Tindakan Pengamanan
Brand : PANASONIC
Model : NI-WL30
Category : Iron