NI-WL41 - Iron PANASONIC - Free user manual and instructions
Find the device manual for free NI-WL41 PANASONIC in PDF.
| Product Type | Cordless Steam Iron |
| Brand | Panasonic |
| Model | NI-WL41 |
| Dimensions (H x W x D) | 15 x 30 x 12 cm |
| Weight | 1.2 kg |
| Power Supply | 1300 W, 220-240 V, 50/60 Hz |
| Water Tank Capacity | 200 ml |
| Soleplate Material | Ceramic |
| Continuous Steam | Up to 25 g/min |
| Shot of Steam | Yes |
| Spray Function | Yes |
| Anti-Drip System | Yes |
| Auto Shut-Off | Yes |
| Self-Cleaning Function | Yes |
| Maintenance | Clean soleplate with damp cloth; use self-cleaning function periodically. |
| Safety | Auto shut-off after 8 minutes vertical or 30 seconds horizontal |
| Spare Parts | Charging base, water tank, soleplate (available via Panasonic service) |
| Repairability | Repair by authorized Panasonic service centers |
| Color | White/Blue |
| Included Accessories | Charging base, measuring cup |
Frequently Asked Questions - NI-WL41 PANASONIC
User questions about NI-WL41 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Iron in PDF format for free! Find your manual NI-WL41 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NI-WL41 by PANASONIC.
USER MANUAL NI-WL41 PANASONIC
Operating Instructions
(Household Use Only) Cordless Steam Iron
Model No. NI-WL41
English
3-14
i6200Q-6P52A
Panasonic
English
Operating Instructions
(Household Use Only) Cordless Steam Iron
Model No. NI-WL41
Contents
| Safety precautions | 04-07 |
| Anti calc system | 07 |
| Automatic shut-off | 07 |
| Anti drip system (Automatic water seal) | 07 |
| Parts identification | 08 |
| How to use as a steam iron | 09-11 |
| How to use the power shot and the vertical shot | 1 |
| How to use as a dry iron | 11 |
| Fabric and ironing recommendations | 12 |
| How to care for your iron | 12 |
| Frequently asked questions | 13 |
| Trouble shooting | 13 |
| Specifications | 14 |
Thank you for purchasing this Panasonic product.
Before operating this unit, please read these instructions completely and save them for future use.
Safety precautions
To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions.
Explanation of symbols
The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
WARNING
Denotes a potential hazard that could result in serious injury or death.
CAUTION
Denotes a hazard that could result in minor injury or damage to your belongings.
in minor injury or damage your belongings.
The following symbols are used to classify and describe the type of instructions to be observed.
This symbol is used to alert users to a specific operating procedure that must not be performed.
This symbol is used to alert users to a specific operating procedure that must be followed in order to
) operating procedure that must be followed in order to
operate the unit safely.
WARNING
To reduce the risk of personal injury, electric shock or fire, please observe the following:
Do not use when the power plug or power cord is
damaged or hot. Never use the iron if the power
plug fits loosely in a household outlet.
Do not leave the iron unattended while it is
connected to the outlet.
Do not connect or disconnect the power plug and the appliance plug to a household outlet or the power base with wet hands.
Do not damage, modify, forcibly bend, pull, or
twist the power cord.
Do not place anything heavy on or pinch the power cord.
Do not wrap the power cord around the iron when storing.
Do not use with the power cord bundled.
Do not use the iron with wet hands.
Do not use in proximity of flammable materials.
Do not allow the power cord to touch hot surfaces.
Never modify, disassemble, or repair.
Doing so may cause ignition or injury due to
abnormal operation. Contact an authorized service
center for repair.
WARNING
Do not immerse the iron in water or other
liquids. Do not supply water to the unit directly from the
faucet.
- Doing so may cause burns, electric shock or fire
due to a short circuit.
The iron is not to be used if it has been dropped, and there are visible signs of slumps or if it is
and there are visible signs of damage or if it is leaking.
- Refer servicing to authorized service personnel.
To reduce the risk of personal injury, electric shock or fire, please observe the following:
The iron must only be used with the power base
provided. When the iron is not in use, always place the
when the iron is not in use, always place the iron securely into the power base.
- Failure to do so may cause the product to fall, fire.
injury or bu
Always ensure the appliance is operated on an
electric power source matched to the rated
voltage indicated on the iron. Fully insert the power plug.
The power plug must be unplugged before filling
water to the water tank.
Regularly clean the power plug to prevent dust
from accumulating
- Disconnect the power plug and wipe with a dry cloth.
Immediately stop using and unplug the power plan if there is an abnormality or malfunction.
plug if there is an abnormality or malfunction. Examples of abnormalities:
Examples of abnormalities. - The iron stops occasional
The iron stops occasionally, the power cord of the power plug or appliance plug is abnormally
the power plug of appliance plug is abnormally hot or discolored.
· The iron is deformed or smells of burning.
- Refer servicing to authorized service personnel.
This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that
they do not play with the appliance.
- Failure to do so may cause an accident or injury.
The iron must be firmly rested on the power base,
and the power base must be placed on a flat and
stable surface. When this product is used as a horizontal steam iron, the iron must be used and
horizontal steam iron, the iron rested on a flat, stable surface
- The soleplate may be scratched, or even injuries or
scald may be caused if the iron head falls over.
If the power cord is damaged, it must be replaced
by the manufacturer, its service center, or
similarly qualified persons in order to avoid a
hazard.
- Failure to do so may cause an accident or injury.
-
log
16
E
CAUTION
To reduce the risk of personal injury, property damage, electric shock or fire, please observe the following:
Do not touch the hot surface (such as the soleplate and the hot surface around it).
Do not touch the steam or "power shot" during use.
- When using an ironing board through which steam can penetrate, do not put your hand, leg, etc., under the ironing board. - Do not aim the steam towards your hand, knee, or any other part of the body.
- Do not use steam or "power shot" when the iron is partially sticking out from the ironing board. - Do not iron clothes that you are wearing.
Do not insert pins or needles into the iron or use it on clothes with sewing needles or the like inserted.
Do not put the soleplate too close to you or others since steam may unexpectedly erupt from it.
Do not use the iron on anything other than fabric.
Do not store the power cord coiled with sharp angles.
- This may damage the cord.
Do not repeatedly and quickly press the power shot button. - If repeating operation over an interval of less than 2 seconds, burns due to hot water leaks may result.
Do not add perfume, vinegar, starch, descaling agents, ironing aids, or other chemicals to the water tank. (Only use normal temperature tap water in the iron.) - Doing so may cause scalds or getting dirty due to damage to the product.
If the shot intensity becomes low, do not operate the power shot button. - Doing so may cause burns due to hot water leaks.
Do not tilt or violently move the iron back and forth. - Doing so may cause burns due to hot water leaks.
Do not use any ironing accessories available on the market. - Doing so may cause burns or damage to cloth due to incorrect operation.
Do not use the iron near walls or furniture that cannot withstand high temperature or humidity. - Doing so may damage the wall or furniture.
Do not use the iron in opposite. - Doing so may cause burn due to water leak by wrong operation.
CAUTION
To reduce the risk of personal injury, property damage, electric shock or fire, please observe the following:
Use a dry iron on moist clothing (spray misted).
Disconnect the power plug and appliance plug by holding the wire instead of pulling on the power cord. - Failure to do so may break the power cord, and may cause burns, electric shock, or fire due to a short circuit.
When using with following fabric, test on an inconspicuous area, or place a cloth over the fabric to prevent the fabric from marking. • Expensive or specially processed fabrics (velvet, acrylic, nylon, cashmere, etc.) • Fabrics that are labeled as "low heat" or "medium heat", or dark colored fabrics.
Drain water from the water tank after use. - Failure to do so may cause the water to leak out from the soleplate when the iron is used next time.
Always unplug the power plug during not in use. - Failure to do so may cause fire, electric shock.
Anti calc system
- The built-in and calc system in the water tank continuously reduces scale build up in the vaporizing chamber of the iron. This system makes it possible to use the steam function for a long period of lime and prevents steam vents from clogging. - Ordinary water can be used in this iron for a long time, and steam function doesn't weaken. Anti calcium cassette (In the water tank)
Automatic shut-off
The iron will automatically shut itself off if the iron has been left on the power base more than about 10 minutes.
- Turn the iron back on - Turn the iron back on to resume ironing, simply push the temperature select, button until the red light appears at the desired temperature control indicator.
* At the situation of auto shut-off, if the supply power shut off, after electricity resume, the iron will at the situation of shut off.
Anti-drip system (Automatic water seal)
Auto-valve system built into the soleplate: when the temperature of the soleplate drops below 110°C, the valve for the vaporizing chamber in the iron automatically closes and stops the water from going in further. This prevents water from settling out of the soleplate, staining the clothes. Besides, it is unnecessary for you to heat the soleplate again; it will automatically dry and store the iron when it cools.
Auto-valve system
Parts identification
Cover case B, Case lock lever, Power shot button, Temperature control pad, Handle, Water tank release button, Fabric guide chart, Power base, Power plug
Appliance plug
Power cord
Maximum water level
Indicator (MAX line)
Water tank
Soleplate
Water fill cover
Steam/dry selector * Plug type may vary to comply with respective country or region requirements.
Temperature control pad
• Power off • Automatic shut-off (P07). To reheat your iron, simply push the temperature select button until the red light appears at the desired temperature control indicator.
Cordless irons
Once an iron is placed on a power
base, the power base starts working and
transfers the heat to the iron.
The iron retains heat to be used for ironing.
The temperature of the iron gradually changes during use. Place the iron back on the base
to reheat it whenever you are not ironing. (e.g., when setting
garments on the ironing board, etc.)
How to use as a steam iron: 1. Remove the cover case: Place the unit on a firm and stable surface, while pulling/pressing the case lock lever, lift the cover case to open. 2. Insert the appliance plug into the power base.
3. Move the steam/dry selector to the "🔍" position. 4. Remove the water tank by pressing the water tank release button.
① Press the release button.
② Remove the water tank.
5. Open the water fill cover.
Fill the water tank up to
the "MAX" line. 6. Close the water fill cover.
Re-install the water tank into
the main unit.
Push it until a click sound
is heard.
- Close the water fill cover. Re-install the water tank into the main unit. Push it until a click sound is heard.
Notes:
• The appliance plug must be inserted into the power base securely.
- While filling the water tank with water, do not plug the power cord into an outlet.
- Do not overfill the water tank. Check the water level with the water tank held in its vertical position.
Use pure tap water.
Falling off may cause fracture of the water tank, thus resulting in water leakage. Please be careful.
- Plug the power cord into an electrical outlet.
Set the iron on the power base securely.
Push the temperature select button until the temperature control index
until the temperature control indicator light for steam zone starts blinking
light for steam zone starts blinking.
Notes:
- When using the steam, please set the temperature select
scale to '2' or '3'
- For high steam, please set to "3". Low temperature will
lead to water leakage.
- Do not leave the iron unattended while it is connected to
the electrical source
- a) Preheat the iron until the temperature control
indicator light changes from blinking to steady illumination.
(When the iron is placed on the
power base during use,
it is reheated as long as the temperature
decreases. However,
the light will illuminate
instead of blinking.)
b) Move the steam/dry
selector to select the steam
quantity, and start ironing.
c) Please confirm the water volume during use. Pull out
the plug before refilling the iron according to
steps 3-6.
Notes:
The iron should be set on the power base securely for
connecting to power supply. While not in use, please set
back on the power base to maintain the selected
temperature. Just put the iron into power base, don't put it
at other place
, This iron must only be used with the power base provided.
- When steam does not come out enough during use, set the iron back on the power base to reheat it for approx. 30 seconds.
Steam/dry selector (switch as the following)
Dry | Low steam | High steam
Low steam:
for thin or delicate fabrics
that require small amount of
steam.
High steam:
for fabrics that require high
amount of steam (i.e. thick
materials, items with stubborn
wrinkles.)
After use
- After ironing, push the temperature select button until the "0" light turns on, pull out the plug. Move the steam/dry selector to "Dry" position.
- Press the water tank release button, take out the water tank.
Empty water from the water tank.
- Re-install the water tank, keep
the steam/dry selector in the
"Dry" position.
- Set the iron back to the power base. Push the cover case down until a click sound is heard; then store the iron at a safe place.
• After ironing, while cooling down and storing; always keep the steam button in the "Dry" position.
• The iron can be stored in the cover case when it is still hot.
How to use the power shot and the vertical shot
For fabrics of thick materials and with stubborn wrinkles, and cleaning the steam vents at the same time.
- Keep the steam/dry selector in the "Dry" position and set the temperature select button to "3", or some hot water will drop from the iron.
- Pump the power shot button
after the indicator light changes from blink to illumination.
• The interval of pumping for the power shot should not be shorter than 2 seconds to avoid
2 seconds to avoid hot water dripping
hot water dripping from the soleplate.
- When the steam does not come out sufficiently at the beginning of use, pump the power shot button several times until the steam comes out.
When using the vertical shot
Hang the garment on a clothes hanger. Hold the iron away from your body, close to but not touching the fabric. Pull the fabric tight with your free hand and pump the power shot button at 2-5 second intervals.
Notes:
- Never iron clothes on the body or point your iron at anyone when steaming.
- When steam does not come out enough during use, set the iron back on the power base to reheat it for approx. 30 seconds.
How to use as a dry iron
- Remove the cover case same as step 1 of "How to use as a steam Iron", move the steam/dry selector to the "Dry" position.
- Set the iron on the power base securely, insert the appliance plug into the power base and plug the power plug into an electrical outlet.
- According to «Fabric and Ironing recommendations» push the temperature select button to the desired position. Preheat the Iron until the temperature control indicator light changes from blink to illumination, and start to iron.
- After ironing, set the iron back to the power base and pull out the plug. Push the cover case vertically until a click sound is heard; then store the iron at safe place.
Fabric and ironing recommendations
| English |
 |
Notes:
• For heat-sensitive fabric, use a press cloth on top of fabric. otherwise it will ruin or damage. - Iron blended fabrics, setting the temperature according to lower-temperature fiber. - Iron clothes with worse heat resistance first while ironing the different kinds of cloth.
How to care for your iron
▶ Surface of the iron • After unplugging and cooling the iron, simply wipe with a damp cloth and if necessary, use a neutral detergent - Never use any strong cleaners
▶ Soleplate
• Starch and other residue may be easily removed from the soleplate with a damp cloth. • To avoid scratching the surface, never use a metallic pad to clean the soleplate, and never place the iron on a rough suna • The best way to remove synthetic residue from the soleplate is to iron over an old cotton cloth rag after heating the iron.
Notes
• Never use cleaners or steam iron detergent in the iron, since they may damage the working parts of the iron. - Some odor may be released during initial use of the iron. however, this is normal and the odor will not attach to your clothes
Self-cleaning
Cleaning the steam chamber of the soleplate and steam vents with power shot, according to "How to use the power shot and the vertical shot" (P11). Pump the power shot button several times until steam is invisible.
Frequently asked questions
Question Answer
Why is a click sound or metallic sound heard while using or shaking the iron?
These sounds are made by the internal parts of the iron, such as the leakage prevention mechanism, moving slightly. This is normal.
Why do clothes sometimes become brown after being ironed?
If there is laundry detergent remaining on the fabric, the clothes may become brown after being ironed.
Why are white powder/particles coming out of the steam vents while using the steam function (especially when using "power shot")?
The powder/particles are hydrophilic treatment or impurities and minerals found in hard water, etc. These are not harmful and can be brushed off clothing.
Troubleshooting
Problem Causes, Solution
| No heating | Make sure the power plug and the appliance plug are fully plugged into a household outlet or the power base. |
| No steam | Fill the water tank with tap water up to maximum water level indicator.If there is no steam, set the steam/dry selector to the steam position, or set the temperature select button to "3". |
| Poor sleaming power | For poor steam, move the steam/dry selector several times, then reset to the steam position, set the temperature select button to "3".Press the power shot button several times when the "power shot" appears insufficient. |
| Wait until the indicator light changes from blink to illumination. | |
| Water leaks from steam vents | Press the power shot button in intervals of at least 2-5 seconds when using the "power shot".Make sure the temperature control indicator setting is on "3". |
| Clothes are marked | Empty the water tank and fill it with clean water. If use a container to fill the water, use the clean one. There may be contaminants in the iron. |
| Specifications | |
| Model No. | NI-WL41 |
| Power source | 220-240 V~ 50-60 Hz |
| Power consumption | 1300-1550 W |
| Weight (approx.) | 1.0 kg |
| Weight (with cover case) (approx.) | 1.9 kg |
| Water tank capacity (approx.) | 135 mL |
| Steam generations way | Drop |
| Power cord length | 1.6 m |
| Thermostat | Temperature range: °1 °3 ° (120-205 C) |
| Stand mode Power base | |
| Lamp Temperature control pad | |
| Dimension (approx.) | (WxDxH)230 × 180 × 210 mm |
This iron is intended for household use only.
Website: http://www.panasonic.com
© Panasonic Corporation 2019
Printed in China
P1069-D
- Reduce the impact on the hidden regret of the country
- PANASONIC
- CONTENTS
- SAFETY PRECAUTIONS
- EXPLANATION OF SYMBOLS
- WARNING
- CAUTION
- ANTI CALC SYSTEM
- AUTOMATIC SHUT-OFF
- ANTI-DRIP SYSTEM (AUTOMATIC WATER SEAL)
- NOTES
- AFTER USE
- HOW TO USE THE POWER SHOT AND THE VERTICAL SHOT
- HOW TO USE AS A DRY IRON
- HOW TO CARE FOR YOUR IRON
- SOLEPLATE
- SELF-CLEANING
- FREQUENTLY ASKED QUESTIONS
- QUESTION ANSWER
- TROUBLESHOOTING
- PROBLEM CAUSES, SOLUTION
Brand : PANASONIC
Model : NI-WL41
Category : Iron