NI-JWT960 - Iron PANASONIC - Free user manual and instructions
Find the device manual for free NI-JWT960 PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steam Iron |
| Brand | Panasonic |
| Model | NI-JWT960 |
| Power Consumption | 2400 W |
| Voltage | 220-240 V AC, 50/60 Hz |
| Water Tank Capacity | 300 ml |
| Soleplate Material | Ceramic-coated stainless steel |
| Steam Output (continuous) | 40 g/min |
| Steam Burst | 150 g/min |
| Spray Function | Yes |
| Vertical Steaming | Yes |
| Anti-Drip System | Yes |
| Auto Shut-Off | Yes (8 minutes when vertical, 30 seconds when horizontal or tipped over) |
| Self-Cleaning | Yes |
| Anti-Scale | Yes |
| Cord Length | 2.5 m |
| Dimensions (L x W x H) | 30.0 x 12.5 x 15.5 cm |
| Weight | 1.2 kg |
| Maintenance & Cleaning | Regular descaling with vinegar or descaler; wipe soleplate with damp cloth |
| Safety Features | Auto shut-off, heat-resistant base, locking system |
| Spare Parts Available | Soleplate, water tank, spray nozzle, steam button, power cord |
| Repairability Index | 8/10 (common parts and easy disassembly) |
Frequently Asked Questions - NI-JWT960 PANASONIC
How do I fill the water tank?
Open the water tank cover, tilt the iron slightly, and pour water into the opening. Do not exceed the MAX line. Use distilled or demineralized water to prevent scale buildup.
What type of water should I use?
For best performance and longevity, use distilled or demineralized water. Tap water can be used but may cause scale buildup over time. Avoid water with additives like perfume or starch.
How do I activate the steam burst?
Press the steam burst button firmly while ironing. For extra steam, press the button multiple times quickly. Ensure the iron is hot enough (temperature setting at least at 2 dots).
The iron is not producing steam. What should I do?
Check that the water tank is filled. Make sure the temperature dial is set to a steam-enabled setting (2 dots or higher). If the iron is cold, wait for it to heat up. If the steam vents are clogged, perform a self-cleaning procedure.
How do I clean the soleplate?
Unplug the iron and let it cool. Wipe the soleplate with a damp cloth. For stubborn residue, use a mixture of baking soda and water or a specialized soleplate cleaner. Avoid abrasive pads.
How often should I descale the iron?
Descale every 1-2 months depending on water hardness. Use the self-cleaning function or fill the tank with a mixture of 1 part vinegar to 2 parts water, steam thoroughly, then rinse.
Does the iron have automatic shut-off?
Yes, the iron will shut off automatically after 8 minutes of inactivity when standing upright and after 30 seconds when lying on its side or tipped over. A light will flash to indicate auto shut-off.
Can I use the iron for vertical steaming?
Yes, hold the iron vertically and press the steam burst button. Keep the fabric taut and the iron a few centimeters away. Use this method for removing wrinkles from hanging garments or curtains.
What do I do if water leaks from the soleplate?
This is often due to condensation if the iron is not hot enough. Wait until the iron reaches the correct temperature. If leaking persists, check the water tank cap is sealed and ensure you are not overfilling. The anti-drip system may need cleaning.
How do I store the iron properly?
Let the iron cool completely. Empty the water tank. Wrap the cord loosely around the cord winder. Store the iron upright on its heel to prevent scratches on the soleplate. Use the locking system if available.
User questions about NI-JWT960 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual NI-JWT960 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NI-JWT960 by PANASONIC.