NVR-7406-32HD-B - Television NEVIR - Free user manual and instructions

Product Type	LED Television
Brand	Nevir
Model	NVR-7406-32HD-B
Screen Size	32 inches (80 cm diagonal)
Resolution	HD Ready (1366 x 768 pixels)
Display Technology	LED
Dimensions (with stand)	73.0 x 48.0 x 18.0 cm
Weight (with stand)	4.2 kg
Power Consumption (max)	50 W
Standby Power Consumption	< 0.5 W
Input Voltage	AC 100-240 V, 50/60 Hz
Tuner	DVB-T/T2/C
HDMI Ports	2 x HDMI
USB Ports	1 x USB 2.0
Composite Video Input	1 x AV (shared with component)
Audio Output	1 x Optical, 1 x Headphone
Built-in Speakers	2 x 8 W
VESA Mount	200 x 200 mm
Energy Class	A+
Cleaning Instructions	Wipe with a soft, dry cloth; do not use liquid cleaners
Safety Note	Do not place near heat sources; ensure adequate ventilation
Spare Parts & Repairability	Contact authorized service center for genuine spare parts; repair by qualified technician only
Manual Language	English (other languages available online)

Frequently Asked Questions - NVR-7406-32HD-B NEVIR

How do I connect an external device via HDMI?

Connect the HDMI cable from your device to any HDMI port on the TV. Use the Source button on the remote to select the corresponding HDMI input.

Can I play media files from a USB drive?

Yes, insert a USB drive into the USB port. Press Source and choose USB. The TV supports video, music, and photo formats like MP4, MP3, and JPEG.

How do I clean the TV screen safely?

Turn off and unplug the TV. Use a soft, dry microfiber cloth to gently wipe the screen. Do not apply liquids or abrasive cleaners directly.

What should I do if the TV has no sound?

Check if the volume is muted or set too low. Ensure the audio cable is connected properly if using external speakers. Also, verify the audio settings in the menu.

How do I perform a channel scan?

Go to Menu > Channel > Auto Tuning. Select your region and start the scan to store all available channels.

Does this TV support wall mounting?

Yes, the TV is VESA compatible with 200 x 200 mm mounting pattern. Use appropriate wall mount hardware and ensure the wall can support the TV weight.

How can I reset the TV to factory settings?

Press Menu > Settings > Factory Reset. Enter the PIN (default: 0000) and confirm. This will erase all personal settings.

What is the standby power consumption?

The standby power consumption is less than 0.5 W, helping to save energy when the TV is turned off.

Where can I find the model number?

The model number is printed on a label on the back of the TV and also on the original packaging. It is typically near the power cord connection.

How do I update the TV firmware?

Nevir does not provide user-initiated firmware updates. If an update is necessary, contact technical support or visit the official Nevir website for instructions.

USER MANUAL NVR-7406-32HD-B NEVIR

Front view of a modern computer monitor with blank screen (no text or symbols visible)

Two identical illustrations of a monitor with a pencil and a cross mark, no text or symbols present.

CONTENIDOS

Technical line drawing of a mechanical assembly with a component above a flat base (no text or symbols)

Line drawing of a flat-screen monitor with two labeled buttons (1 and 2) pointing to the screen area (no text or symbols on the device itself)

MEDIA mode: ▶▶| Siguiente

Three technical line drawings of a rectangular electronic component or panel assembly (no text or symbols)

Auto,16QAM,32QAM,64QAM,128QAM,256QAM.

Inicio

Tropical beach scene with clear blue sky and distant islands under a cloudy sky (no text or symbols visible)

6.1 Música

Front view of a modern computer monitor with blank screen (no text or symbols visible)

Screw hole	Furo de parafuso
Top View	Vista superior

Two identical illustrations of a monitor with a hand holding it, one marked with an 'X' and the other with a checkmark (no text or symbols)

CONTEÚDO

Technical line drawing of a mechanical assembly with a base plate and a top component (no text or symbols)

Line drawing of a flat-screen monitor with two labeled buttons (1 and 2) pointing to its screen area (no text or symbols on the screen itself)

1. Janela do sensor remoto
2. Indicador de energía
3. Alto-falante
4. Chave de menu
5. Chave de Programa '+'
6. Chave de Programa' -'
7. Chave de volume '+'
8. Chave de volume'+'
9. Chave de fonte
10. Chave de Standby
11. Entrada de plugue de alimentação
12. Saída para fone de ouvido
13. Entrada do scart
14. Entrada de PC AUDIO
15. Entrada de PC(VGA)
16. Saída Coaxial
    17.RFIN
    18.HDMI1
    19.HDMI2
    20.HDMI3
    21.USB
17. Entrada Mini AV o YPbPr-R/L
18. Entrada Mini YPbPr
    24.Entrada CI

1.5 Controlador remoto

Mode Setting Country

(Modo disponível de PICTURE: Standard, Mild, Personal, Dynamic).

Brightness/Contrast/Sharpness/Saturation/Hue

Signal information

First Time Setup

Tropical beach scene with clear blue water and distant island under a blue sky (no text or symbols visible)

6.2. Música

Symbol of a trash bin crossed out by two crossed lines, with no text or labels present.

Operating Instruction

Model: NVR-7406-32HD-N

NVR-7406-32HD-B

Front view of a modern black CRT monitor with blank screen (no text or symbols visible)

Please read these instructions before operating your set and retain them for future reference.

PRECAUTION

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. This apparatus with CLASS I construction.

6. Do not use this apparatus near water, the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

7. Clean only with dry cloth.

8. Do not install this apparatus in windtight places such as the wall-unit. Do not block any ventilation openings.

9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

12. Only use attachments/accessories specified by the manufacturer.

13. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14. Unplug this apparatus during lightning storms or when unused for long periods of time.

15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Note: If the manual is inconsistent with the product, please refer to the actual product.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Used batteries should not be thrown into the garbage can, please leave them at an appropriate depot.

CAUTION

Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

CAUTION

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Attention:

Motionless picture might cause permanent destruction to the display.

• Be sure not to display motionless picture on the LED TV for more than 2 hours, because it would cause picture remnants to appear, which is called "screen burns". To avoid such picture remnants, please decrease the "contrast" and "brightness" of the display when displaying motionless picture.
• While watching TV program in 4:3 size mode for a long time, there would be traces on the edge of the screen's left, right and center parts because of different transmission of the light on the screen. Similar impact on the screen will occur when playing DVD or connecting games control. Products destroyed by these reasons can't be guaranteed for maintenance.
• It might cause picture remnants to display electronic games and motionless . picture of PC more than a period of time. To avoid such effect, please decrease the "contrast" and "brightness" when displaying motionless picture.

IMPORTANT INFORMATION

If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
• The each USB terminal should be loaded with 0.5 A under normal operation;
• Do not attach candle to accessible opening area, to avoid flammable foreign material from entering the TV

• Minimum distances around the apparatus for sufficient ventilation;
• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.;
• No naked flame sources, such as lighted candles, should be placed on the apparatus;
• Attention should be drawn to the environmental aspects of battery disposal;
• The use of apparatus in tropical and/or moderate climates.
• Put the TV in the environment of moderate temperature, not to lay aside the Air Conditioner outlet or stove to avoid damage.
• Use both hands when carrying TV, make TV suffer stable outside force.

- Place the TV on a firm and flat surface, leaving a space of at least 10cm around the set and 30cm from the top of the set to the wall or cabinet. Ensure the TV is positioned close to the wall to avoid it falling when pushed.

- To avoid the TV overturning, when installed, it must with screw through screw hole on the base for fixing TV on the desk.

- When you turning the TV set, do not hold the top side of the TV set, you should hold the bottom side.

Illustration of a hand interacting with a screen and a cross symbol, no text or labels present

Illustration of a hand holding a blank monitor with arrows indicating rotation, next to a checkmark (no text or symbols)

- When you lifting the TV set, do not use one hand to handle it, you should lift the TV set by two hands.

Illustration of a flat-screen monitor with a hand pointing at it and a black X symbol below (no text or symbols on the monitor itself)

Illustration of hands holding a blank screen with a checkmark below (no text or symbols)

CONTENTS

1. Connection and Preparation of TV....2

1.1 Accessories ......2
1.2 Installation of Stand....2
1.3 Installation of Wall Mount Kit(Optional)....2
1.4 Keys and Interfaces....3
1.5 Remote Control....4
1.6 Installation of Batteries....5

2. Basic Operation....5

2.1 Setting of Standby Mode....5
2.2 Selection of Input Mode....5

3. SELECT INPUT SOURCE....6

4.First Time Setup....7

5.Main Menu Operation....8

5.1 Picture Menu....8
5.2 Sound Menu....9
5.3 Channel Menu....11
5.4 Lock System Menu....14
5.5 Setup Menu....15
5.6 EPG Menu....18
5.7 PC Setting Menu....19

6.USB operation....21

6.1 Photo....21
6.2 Music....21
6.3 Movie....22
6.4 Text....22

7. Technical Specification....23

8. Supported Signal Modes....24

9. Simple Troubleshooting 25

1.Connection and Preparation of TV

1.1 Accessories

★ User Manual
★ Remote Control
Battery(UM-4/R03P/AAA)
★ Wall Mount Kit (Pre-assembled)(Optional)

1.2 Installation of Stand

(For the physical structure, please refer to the real object)

Technical line drawing of a flat electronic device with a small component above it, showing mounting base and wiring (no text or symbols)

① Place the TV with the front panel facing downwards on the soft cloth or soft pads on a desk.
② Please put the PVC sticker on the turning axle firstly.
③ Insert the stand into the bottom socket of the TV.
④ Insert the screws into the sockets and tighten them.

1.3 installation of Wallmount Kit(Optional)

The Wall Mount Kit can help install the TV on the wall

For more information about wall mounting, please refer to the instructions provided along with the wall mount kit.

When wall mounting the product, please contact qualified personnel.

If users choose to install the TV by themselves, the producer is irresponsible for any possible damages caused either to the product or to persons.

1.4 Keys and Interfaces

The design and specification takes actual products as the standard

1. Remote sensor window

2. Power indicator

3. Speaker

4. Menu key

5. Program ≠ k'ey

6. Program -'key

7. Volume ≠ Key

8. Volume "key

9. Source key

10. Standby key

11. Power plug input

12. Earphone output

13. Scart input

14. PC AUDIO input

15.PC(VGA) input

1. Coaxial output

17.RFIN

18.HDMI1

19.HDMI2

20.HDMI3

21.USB

1. Mini AV or YPbPr-R/L input

2. Mini YPbPr input

3. Cl input

1.5 Remote Control

1. STANDBY(⏻): Standby turn on and off.

2. SOURCE: Select the signal source.

3. 0\~9 : Continue to press the keys to select a channel.

4. DISPLAY : Display the information of current video and audio.

5. RECALL : Return to previous channel.

6. FREEZE : Freeze the picture.

7. TV/RADIO: Select the TV or Radio mode.

8. P.MODE: Select the picture mode.

9. S.MODE: Select the sound mode.

10. VOL+: Increase the volum e.

11. CH ∧: Select the channel forward.

12. MUTE: Mute sound.

13. VOL-: Decrease the volume.

v : Select the channel backward.14. CH

1. MENU : Enter or exit menu.

2. EXIT : Exit menu or operation.

17.▲,▼,◀,▶ key: The menu item selection.

1. ENTER: Confirm or enter.

2. TXT: Enter or exit teletext

3. TIMESHIFT: DTV mode time shift. MEDIA mode: ▶▶▶ Press one time to pause, press again to playback.

4. EPG:Enter or exit EPG(Electronic Program .Guide) MEDIA mode: ■ Stop the playback and return to file list.

5. FAV.LIST: Favorite channel list

6. RECORD:DTV mode record data USB disk.

7. SUBTITLE:DTV mode select subtitle mode.

8. AUDIO: Select TV audio mode.

9. INDEX: Display the index page. MEDIA mode: Fast Backward

10. SUBPAGE: Enter the sub page mode. MEDIA mode:▶▶Next

11. HOLD: Hold the current page. MEDIA mode:▶Fast Forward

12. REVEAL: Reveal the hidden information. MEDIA Mode: Previous.

13. RED: Access the red item or page.

14. BLUE: Access the blue item or page.

15. GREEN: Access the green item or page.

16. YELLOW: Access the yellow item or page.

1.6 Installation of Batteries

(Here is only the sketch, please in kind prevail)

① Open the back lid of the remote control.
② Install two 7#(AAA)1.5V batteries. Ensure the correct polarity of the batteries.
③ Cover the back lid. Please take out of the batteries from the remote control for long time of no use.
If the remote control doesn't work properly, please carry out the following checks.
- Check the TV is turned on.
- Check the polarity of the batteries are correct.
- Check the batteries are not drained.
- Check the power supply is normal or the power cord is correctly connected.
- Check there are no special fluorescent light or neon light around.

2. Basic Operation

2.1 Setting of Standby Mode

- Press ( ⏻ ) button to turn on the unit.

- Press ( ⏻ button again to return the display to standby mode. The power indicator turns red.

- Be sure not to set your TV in standby mode for a long period of time.

2.2 Selection of Input Mode

This set has different signal source modes, you may continue to press the Source button to select a signal source.

SELECT INPUT SOURCE

3. Select input Source

Press SOURCE button to display the input source list,

Press ▼ ▲ or SOURCE button to select the input source you want to,

Press ENTER button to enter the input source,

Press EXIT button to quit.

First Time Setup

4. First Time Setup

Connect an RF cable from the TV'S input called "RF" to your TV Aerial socket.

OSD Language

Press ◀ button to select the language to be used for menus and message.

Mode SettingCountry

Press ◀ button to select the country you want to.

Tuner Type

Press ◀ button to select mode.

Press ◀ button to select Antenna(DVB-T) or Cable(DVB-C).

Auto Scan

Press ◀ button to select Mode: DTV+ATV, DTV, ATV

LCN

Press ◀ button to select : On, Off.

Auto Channel Update

Press ◀ button to select : On, Off.

Auto Tuning Status

First tuning digital, press Menu button to skip digital tuning,

Second tuning analogue, press Menu button to stop Auto tuning.

Main Menu Operation

5. MaiN Menu Operation

5.1 Picture Menu

Press MENU button to display the main menu.

Press◀/▶ button select PICTURE in the main menu, then press ENTER ▼ to enter.

1. Press ▼ button to select the option that you want to adjust in the PICTURE Menu.
   2 Press Enter/ ◀ / ▶ button to adjust.
   3 Arter fiNishing your adjustment, Press MENU button to save and return back to the previous menu.

Picture MODE

Press ▼button to select Picture Mode, then press button/▶ select.

(Available Picture mode: Standard, Mild, Personal, Dynamic).

TIPS: You can press PMODE button to change the Picture Mode directly.

Brightness/Contrast/Sharpness/Saturation/Hue

Press ▼button to select option, then press button to adjust.

Brightness Adjust the visual perception output of the entire picture, it will effect the iuminousness of the picture.

Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.

Sharpness Adjust the peaking in the detail of the picture.

Saturation Adjust the saturation of the color based on your own like.

Hue Use in compensating color changed with the transmission in the NTSC mode.

Color Temp

Change the overall color cast of the picture.

Press ▼/▲ button to select Color Temp, then press◀/▶ button to select Standard/Cool/Warm.

Standard Produces a vivid image.

Cool Produces a gentle blue-hued image.

Warm Produces a red-hued image.

Advanced Settings

Adjust advanced video features to fine tune the picture.

Press ▼ /▲ button to select Advanced Settings, then press Enter /▶ button to enter sub-menu.

NR

Set options to reduce video noise.

Press▼/▲ button to select NR, then press◄/► button to select.

Off Select to turn off video noise detection.

Weak Detect and reduce low video noise.

Medium Detect and reduce moderate video noise.

Strong Detect and reduce enhanced video noise.

Dynamic Contrast

Automatically adjust picture detail and brightness.

Press ▼/▲ button to select Dynamic Contrast, then press◀/▶ button to select

(Available Dynamic Contrast: Off,Weak ,Medium,Strong ).

5.2 Sound Menu

Press MENU button to display the main menu.

Press ◀ button to select SOUND in the main menu, then press ENTER to enter./

1. Press▼ button to select the option that you want to adjust in the SOUND menu.
2. Press/ button to adjust.
3. After finishing your adjustment, Press MENU button to save and return back to the previous menu.

Sound Mode

Press ▼ button to select / Sound Mode, then press ◀ button to select.

(Available Sound mode: Standard, Movie, Music, Personal).

Treble/Bass/Balance

Press ▼ button to select / option, then press ◀ button to adjust.

Treble Adjust the treble effect. Increases or decreases high-pitched sounds.

Bass Adjust the treble effect. Increases or decreases lower-pitched sounds.

Balance Adjust the balance between left and right speakers to adapt to your listening position.

Surround Sound

Press ▼ button to select / Surround Sound, then press ◀ button to select On or Off

EQ Setting

Adjust the curve of 7 bands equalizer.

Press ▼ button to select EQ Setting, then press Enter / ▶utton to enter sub-menu.

AVL

Automatically reduces sudden volume changes, for example, when switching between the channels.

Press ▼/▲button to select AVL, then press◀/▶ button to select On or Off.

SPDIF

Press ▼/▲ button to select Digital Output, then press ◀/▶ button to select Auto/Off /PCM.

Audio Description

Press ▼ button to select / Audio Description, then press Enter ▶ button to enter sub-menu.

Mode

Press ▼ button to select / Mode, then press ◀ button to select On or Off.

When the mode is On, Volume can be adjust by users

Sound Type

Press ▼ button to select / Sound Type, then press ◀ button to select.

(Available Sound Type: Stereo, Dual I, Dual II, Mixed).

NOTE:

Balance: This item can adjust the speaker's output, it enables you to listen to best at your position.

AVL: This item uses for reducing the difference between channel and program's

volume automatically.

it made the overall water to be even. This function will also reduce the fluctuation of the sound.

5.3 Channel Menu

Press MENU button to display the main menu.

Press ◀ button to select / CHANNEL in the main menu, then press ENTER ▶ to enter.

1. Press ▼ Button to select CHANNEL on that you want to select in the menu.
2. Press Enter button to enter sub-menu.
3. Press MENU button to return back to the previous menu.

Tuner Type

Press ▼ /▲ button to select Tuner Type, then press ◀ /▶ button to select Antenna or Cable.

Auto Scan

Press ▼ /▲ button to select Auto Scan, then press Enter /▶button to enter sub-menu.

Tuner type is Antenna

Tuner type is Cable

Country

Press ◀ /▶ button to select country

Mode

Press◀/▶ button to select Mode: DTV+ATV, DTV, ATV.

Scan Type

Press ◀/▶ button to select Scan Type: Advanced,Quick,Full.

Network ID

Press ◀/▶ button to select Network ID

Frequency

Press ◀/▶ button to select Frequency

Symbol Rate

Press ◀/▶ button to select Symbol Rate

Start

Press Enter / button to start the auto searching.

It will search digital channels first, then analog channels.

Before execute auto channel search, please confirm your antenna type is Antenna or Cable.

Wrong setting of Signal Type maybe cause finding no channel.

Manual Scan

Search for the channels manually.

Press ▼ /▲ button to select Manual Scan, then press Enter / ▶ button to enter sub-menu.

Digital Manual Scan

Press ▼ /▲ button to select Digital Manual Scan, then press Enter / ▶ button to enter sub-menu.

Tuner type is Antenna

Tuner type is Cable

Network ID Press ▶ button to select Network ID

Frequency Press ▶ button to select Frequency

Symbol Rate Press ▲ button to select Symbol Rate

Modulation Press 7 button to select Modulation: Auto, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM.

Start Press Enter / button to start the channel searching.

Analog Manual Scan

Press ▼ button to select Analog Manual Scan, then press Enter / button to enter sub-menu.

Analog Scan

Press ◀ button to select Analog Scan.

Channel to Save

Press ◀ button to select Channel to Save.

Color System

Press ▶ button to select Color System:Auto,PAL,SECAM.

Sound System

Press ◀/▶ button to select Sound System :Auto,DK,BG,I,L or L'.

AFC

Auto Frequency control.

Press◀ button to select On or Off.

Start

Press Enter /◀ button to start the channel searching.

Channel Edit

Press ▼ button to select Channel Edit, then press Enter / button to enter sub-menu.

The four colored keys are the shortcut key for programming the channel.

First press ▼/▲ to highlight the channel you want to delete or move or skip or rename, then:

• Press the Red button to delete the channel.
• Press the Green button to skip the select channel.
• (Your TV set will skip the channel automatically when using CH+/- to view the channels.)
• Press the Yellow button to rename the channel.
• Press the Blue button to set the channel to moving state. Then press ▼/▲ to move it to the position you want to put.

Common interface

press ▼/▲ Enter to select Common interface, then press Only available when there is CI card under DTV.

button to enter sub-menu.

Signal Information

press ▼ ▲ button to select Signal Information, then press the Enter button to see the detail information about the signal. Only available when there is signal under DTV.

5.4 Lock system Menu

Press MENU button to display the main menu.

Press ◀ button / select Lock system in the main menu, then press ENTER to enter.

1. Press ▼ button to PARENTAe option that you want to adjust in the menu.
2. Press Enter/◄/► button to adjust.
3. After finishing your adjustment, press MENU button to save and return back to the previous menu. Default password is 0000, and if forget what you set, please call the service center.

Enable

Press ▼ button to / button Eoak On the Off press ◀ ▶ select

Channel Locks, Parental Rating and Lock Keypad are available when Enable is On.

Channal Locks

Press ▼ button to / select Channal Locks, then press Enter ▶ button to enter sub-menu.

Parental Rating

Press ▼ button to / select Parental Rating, then press ◀ ▶ button to select.

Lock Keypad

Set to prevent it from being used by young children, or other unexpected usage.

Press ▼ button to select / Quick Keypad, then press ◀ button to select

New Password

Press ▼ Button to select New Password, then enter a 4-digital number you want to set twice.

Clear Lock

Press ▼ button to select / Clear Lock, then press Enter ▶ Button to enter.

5.5 Setup Menu

Press MENU button to display the main menu.

Press◀ button select SETUP in the main menu, then press ENTER ▼ to enter.

1. Press ▼ button to SETUPct the option that you want to adjust in the menu.
2. Press Enter/ ◀ / ▶ button to adjust.
3. After finishing your adjustment, press MENU button to save and return back to the previous menu.

OSD Language

Press ▼button to / button to D. Language, then press◀ ▶ select

Audio Languages

Press ▼ button to Enterct Audio Languages, then press button to enter sub-menu.

Press ▼/▲ ◀/ ▶/button to select the Audio Primary Language and Audio Secondary Language.

Subtitle

Select a subtitle language can be displayed. Default English is selected as subtitle language.

Press ▼ button to select Subtitle, then press Enter button to enter sub-menu.

Mode

Press ▼ button to / buttonModeOntheOffress ◀ ▶ select

Press ▼ /▲ button to select the Subtitle Primary Language and Subtitle Secondary Language.

Hearing Impaired

Press ▼ button to H selection being dropped, then press ◀ ▶ select

Teletext

Adjust Teletext settings. Only available under DTV and ATV source.

Press ▼ ▲button to select Teletext, then press ENTER / ▶ button to enter sub-menu.

Under DTV source, press ◀/▶ button to select Digital Teletext Language.

Under ATV source, press ◀/▶ button to select Decoding Page Language.

Mode Setting

Press ▼/▲button to select Mode Setting.

Time Settings

Press ▼ ▲button to select Time Settings, then press ENTER /▶ button to enter sub-menu.

OSD Time

Press ▼/▲button to select OSD Time, press ◀/▶ button to select.

(Available OSD Time: Off, 10 seconds, 20 seconds, 30 seconds, 60 seconds).

Sleep Timer

Set a timer for the TV to turn off automatically.

Press ▼/▲button to select Sleep Timer, press ◀/▶ button to select.

(Available Sleep Timer: Off, 5 mins, 15 mins, 30 mins, 60 mins, 90 mins, 120 mins, 240 mins).

Auto Sleep

Press ▼ /▲button off, select uto Sleep, press ◀ ▶ button to select 3 hours, 4 hours or 5 hours.

Time Zone

Select your time zone.

Press ▼/▲button to select Time Zone, then press ENTER ▶ button to enter sub-menu.

Time

Press ▼ /▲button to select Time, then press ENTER ▶ button to enter sub-menu.

Set Auto Sync to Off, Power On/Off Timer to On, then you can set the time manually. Note: In the case of loss of power, the clock setting will be lost.

PVR Settings

Press ▼ /▲button to select PVR Settings, then press Enter button to enter sub-menu. It will check the USB.

Press ◀ ➤ button to select File Manager, then press Enter button to enter sub-menu.

Press◀/▶ button to select Device List, then press Enter button to enter sub-menu.

Press◀/▶ button to select Scheduled Record, then press Enter button to enter sub-menu.

First Time Setup

Press▼ button to select First time Setup, then press Enter button to enter.

Reset

Press ▼ /▲ button to select Reset, then press Enter/▶ button to enter sub-menu.

If you are sure to reset, press Yes to reset.

5.6 EPG Menu

Press the button EPG I to enter EPG menu.

Press the REDON to display previous date.

Press the GUIT to display next date.

Press the Button to see the setting you have done before.

Press the Button to set the time you want to remind the program you want to see.

Timeshift

Press Pause key when the program is playing under the DTV Source to start Timeshift.

The white bar indicated the recording progress.

The blue bar indicated the playback progress.

This product is compatible with USB 2.0. If USB 3.0 is used the reading process would be much slower and it might cause dysfunction.

On DBVT Mode, just FAT32 is supported

Not all USB Devices are supported;

5.7 PC Setting Menu

Press SOURCE button on the remote control to select PC.

Press MENU button on the remote control to display the main menu.

Press ◀ button on the remote control to select PC SETTING in the main menu.

1. Press ▼ button on the remote control to select the option that you want to adjust in the PC SETTING menu.
2. Press Enter button on the remote control to adjust.
3. After finishing your adjustment, press MENU button to return back to the previous menu.

Auto Adjust

Press Enter/button to adjust the screen automatically to the optimal position of the picture.

H Position.

Adjust the horizontal position of the picture.

V Position.

Adjust the vertical position of the picture.

Phase

Adjust the horizontal interfering lines.

Clock

Adjust the vertical interfering lines.

\*Notes:

1. Sharpness, Saturation and Advanced Settings in PICTURE menu are invalid.
2. Audio Description and Sound Type in SOUND menu are invalid.
3. Channel Locks and Parental Rating in LOCK menu is invalid.
4. Audio Languages, Subtitle, Teletext and PVR Settings in SETUP menu is invalid.
5. PC mode has no CHANNEL menu.

★ Press MENU button, and press"7906", then you can enter to "Hotel Mode".

ATV/AV/SCART/ YPbPr/HDMI

1. PICTURE menu and description are the same as that for DTV mode.
2. Audio Description and Sound Type in SOUND menu is invalid..
3. SCART/AV/YPbPrHDMI mode has no CHANNEL menu.
4. Parental Rating and Channel Locks in LOCK menu is invalid for SCART/HDMI/AV/YPbPr mode. Parental Rating is invalid for ATV mode.
5. Audio Languages, Subtitle and PVR Settings in SETUP option are invalid for SCART/AV/DVD mode. Audio Languages, Subtitle, Teletext PVR Settings in SETUP option are invalid for HDMI /YPbPr mode.
6. HDMI have screen mode in picture menu.PC for computer input.Auto to auto choose Video or PC mode.

USB OPERATION

6. USB OPERATION

Note: Before operating USB menu, Plug in USB device, then press SOURCE button to set the Input Source to USB.

Press ◀/▶ button to select USB in the Source menu, then press Enter button to enter.

Press ◀/▶ button select the option you want to adjust in the main USB menu, then press Enter button to enter.

6.1 Photo

Press ◀ /▶ button

Press ◀ /▶ button

Press ◀ /▶ button

select PHOTO in the main menu, then press select drive disk you want enterwatch, then press select return option to back to the previous menu.

button to enter. button to enter.

Tropical beach scene with turquoise water and distant island, no visible text or symbols

6.2 Music

Press ▶ button to

Press ▼ button to

Press ▼ button to

Enterct MUSIC in the main menu, then press Enterct drive disk you want to watch, then press select return option to back to the previous menu.

button to enter. button to enter.

Press to play or pause.

Press to play the previous song.

Press to play the next song.

Press to play backward.

Press to play faster.

Press to stop.

When highlighting the option you select, the file information will appear on the right.

Press CH+/- to switch operation focus between File List and Player.

6. 3 Movie

Press Button to select EnterMOVIE in the main menu, then press button to enter.

Press Enterbutton to enter drive disk you want to watch, then press

Press ▼/▲ button to select return option to back to the previous menu.

Press to play or pause.

Press to view the previous movie.

Press to view the next movie.

Press to play backward.

Press to play faster.

Press to stop and back to the previous folder.

6.4 Text

Press 🔊 to select EnterButton the menu, then press

Press Enterbuttondoseher drive disk you want to watch, then press

Press ◀/▶ button to select return option to back to the previous menu.

When highlighting the option you select, the file information will appear on the right.

7. Technical Specification

Product Model	NVR-7406-32HD-N / NVR-7406-32HD-B
Screen Size	32 diagonal
Aspect Ratio	16:9
Power Supply	AC 100-240V~,50/60Hz
Power Consumption	60W
TV System	PAL B/G D/K I,SECAM B/G D/K DVB-T,DVB-C
Audio Output Power (Internal)	8Wx2
Input Terminal	★ Antenna Input (D Type) x 1★ VGA(D-Sub 15 Pin Type) x 1★ HDMI Connector x 3★ Mini YPbPr Input Terminals x 1★ Mini AV Input Terminals x 1★ PC Audio Input x 1★ USB x 1★ CI x 1★ SCART x 1
Output Terminal	★ 1 set of coaxial output★ 1 set of earphone output
Outline Size(LxWxH)(mm) (without stand) (With stand)	731x87x437731x165x476
Working Temperature	0C~40C
Working Humidity	20% ~ 80% Non-condensing

Note: the specification shown above may change without notice for quality improvement.

8. Supported Signal Modes

A.VGA Mode

Resolution	Horizontal Frequency (Khz)	Vertical Frequency (Hz)	Memo
640 x 480	31.50	60.00
800 x 600	35.16	56.25
	37.90	60.00
1024 x 768	48.40	60.00
1366x 768	47.85	60.00
1920x 1080	67.50	60.00	Full HD panel only

Note: You're suggested to use the VGA connecting cord of not more than 5 meters to ensure the appropriate picture quality.

B.YPbPr Mode

Resolution	Horizontal Frequency (Khz)	Vertical Frequency (Hz)
480i	15.734	59.94
480p(720x480)	31.468	59.94
576i	15.625	50.00
576p(720x576)	31.25	50.00
720p(1280x720)	37.50	50.00
	45.00	60.00
1080i	28.13	50.00
	33.75	60.00
1080P(1920x1080)	67.50	60.00
	56.25	50.00

C.HDMI Mode

Resolution	Horizontal Frequency (Khz)	Vertical Frequency (Hz)
480p	31.468	59.94
576p	31.25	50.00
720P	45.00	60.00
1080i	33.75	60.00
1080P(1920x1080)	67.50	60.00

-When the signal received by the Display exceeds the allowed range, a warning message will appear on the screen.

- You can confirm the input signal format onscreen.

9. Simple Troubleshooting

If the display fails or the performance changes dramatically, check the display in accordance with the following instructions. Remember to check the periphe rals to pinpoint the source of the failure.

Symptom	Solution
Power cannot be turned on.(Power indicator does not light.)	-Check that both ends of the power cable are plugged into the socket appropriately and the wall socket is operational
No Input Signal message appears.	-Check that the signal line is connected properly.-Check that the power of the relevant peripherals is turned on.-Check that the Input option that has been selected matches with the input signal.
The remote control does not function properly.	-Check the batteries are not drained.(Use new batteries.)-Check that the remote control is within the operating range.-Check that the remote control is pointed to the remote control window on the display.-Check that there are no obstacles between the remote control and the remote control window.
Flashing spots or stripes appear on the screen.	-Check that there are no emission (Car, HV cable or Neon lamp) or other possible interference sources.
Image colour or quality deteriorates.	-Check that all the video settings are adjusted appropriately, such as brightness, contrast, colour etc.-For more information about video settings, refer to OSD Functions in Chapter 2.
Screen position and size are incorrect.	-Check that the screen position and size is adjusted appropriately.
Image or colour is incorrect.	-Check that the signal line is connected properly.-When connecting to a PC, you can change the resolution of the PC to acquire the correct image.The discrepancy of the PC output signal may affect the display of the image.
Display warning message.	-Check that the input signal line is properly fixed.-Select the correct input signal.-For more information, refer to Supported Signal Modes in Chapter 4.

Symbol of a trash bin crossed with a diagonal line, no text or numbers present

The European Directive 2002/96 /EC on Waste Electrical and Electronic Equipment (WEEE) required that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the material they contain, and reduce the impact on human health and the environment. The crossed out "wheeled bin" symbol on the product remind you of your obligations that when you dispose of the appliance, it must be separately collected. Besides that, waste batteries and/or accumulator must be removed prior to delivery of WEEE, thought the separated collection channels provided for this purpose (distributors and/or facilities from Local Authorities)

In order to fulfill ruling UNE EN-60335, we indicate that if the flexible wire is damaged, it can only be replaced or repaired by a technical service recognized by NEVIR S.A. as per special tooling is required.