KCHS3126 WH - Range hood Kunft - Free user manual and instructions

Product Type	Range Hood
Brand	Kunft
Model	KCHS3126 WH
Color	White
Width	60 cm
Depth	38 cm
Height	15 cm
Net Weight	8.5 kg
Power Supply	220-240 V, 50 Hz
Motor Power	120 W
Airflow (Max)	620 m³/h
Noise Level (Max)	56 dB(A)
Extraction Mode	Ducted / Recirculation (optional carbon filter)
Controls	Mechanical push buttons
Lighting	2 x 1.5 W LED
Grease Filter	Aluminum washable filter
Carbon Filter	Optional, sold separately
Energy Class	B
Installation Type	Under cabinet / Wall-mounted
Warranty	2 years

Frequently Asked Questions - KCHS3126 WH Kunft

How do I clean the grease filter?

Remove the aluminum filter and wash it with warm soapy water or in the dishwasher at low temperature. Dry it thoroughly before reinstalling.

Does this hood require a carbon filter?

If you use the recirculation mode, a carbon filter is required to absorb odors. It is not included and must be purchased separately.

What is the noise level of the KCHS3126 WH?

The maximum noise level is 56 dB(A), which is comparable to a normal conversation.

Can I install this hood myself?

Basic installation can be done by a DIY enthusiast, but we recommend a professional electrician for electrical connections and to ensure compliance with local codes.

What are the dimensions of the hood?

The hood measures 60 cm width, 38 cm depth, and 15 cm height.

How often should I replace the carbon filter?

Carbon filters should be replaced every 3-6 months depending on usage. A saturated filter reduces efficiency.

Does the hood have a remote control?

No, the KCHS3126 WH is operated via mechanical push buttons on the front panel.

What type of lighting does it use?

It features 2 LED lights (1.5 W each) that provide bright and energy-efficient illumination of the cooking area.

Is the hood suitable for an island kitchen?

This model is designed for wall-mounted or under-cabinet installation, not for island use.

How do I reset the filter cleaning indicator?

Some models have a manual reset: press and hold the light button for 3 seconds. Refer to the manual for your specific model.

USER MANUAL KCHS3126 WH Kunft

Exterior view of a Kuwait air conditioner unit (no text or symbols visible on the device body)

visor cooker hood

is perfectly enough

KCHS3126 WH

kunft.

Dear client,

Thank you for purchasing this product.

The quality of this appliance has been certified by several laboratory tests. This instructions manual is provided to simplify the use of the appliance as well as to guarantee a safe use.

Please read carefully the instructions and safety measures described in this manual.

We sincerely hope you will be satisfied when using your new appliance.

2

INDEX

1. SAFETY INSTRUCTIONS 4

1.1. Power Supply 5
1.2. Power Cord and Other Cables 6
1.3. Humidity and Water ...... 6
1.4. Cleaning 6
1.5. General Precautions ...... 6

1. OPERATING INSTRUCTIONS 10

2.1. Product Description.... 10
2.2. Using the Product ...... 12
2.3. Maintenance 13

1. POST-SALE SERVICE 13
2. ENVIRONMENTAL PROTECTION 14

kunft.®

1. SAFETY INSTRUCTIONS

	WARNING
	Risk of Electric ShockDo Not Open
Warning: to avoid the risk of electric shock, do not remove the cover.The interior does not contain any parts that can be repaired by the user. Ask for assistance by qualified personnel.

Important Warnings

Before using your appliance read this instructions manual carefully and keep it in a safe place as you may need to consult it in the future.

Before turning on your appliance, and to ensure a safe and correct operation, do not use if:

• It has fallen to the ground;
• You notice any evidence of damage;
• Any anomaly occurs during its operation.

To avoid hazards or deterioration of your appliance through incorrect use it is advisable to read these instructions thoroughly.

Your appliance may not be used for other purposes than the ones intended and solely for household use. Any damage resulting from using the appliance outside this scope, any incorrect use, as well as any ma-

nual modifications to the product will not be covered and automatically voids the warranty.

Assistance

In case of malfunction, take your appliance to a qualified technician for assistance.

This appliance can be used by children from the age of 8 and by people with reduced physical, sensorial or mental capabilities and/or lack of experience and knowledge if they have been given instructions on using the appliance safely and if they understand the hazards involved. Children may not play with the appliance. Cleaning and maintenance must not be carried out by children without supervision.

These instructions are also available at www.suporteworten.pt

1.1. Power Supply

Make sure the main voltage is compatible with the appliance's. If this is not the case please consult the Customer Support Service.

kunft.

1.2. Power Cord and Other Cables

Do not tangle the cord or pull it to disconnect the appliance. Also, keep the cord away from warm surfaces.

Never use the appliance if it has a damaged cable or socket.

Take it to the Technical Support Service for replacement.

1.3. Humidity and Water

Do not use your appliance in humid places. Do not allow the appliance to become wet under any circumstances as this may be dangerous. To avoid fire hazard or electric shock do not expose your appliance to humidity or water. Furthermore, do not place your appliance under water (e.g. for cleaning).

1.4. Cleaning

Before cleaning, be sure to switch off the appliance and remove the plug from the main power supply. Always allow the unit to cool down before cleaning.

To clean the exterior of the product use a dry soft cloth only.

1.5. General Precautions

- Please follow the instructions in the user manual which help to properly install and operate this product and enjoy its advanced features. Please keep the instructions for future reference.

• Read all instructions before using the product.
• Maintenance and service operations are only to be carried out by authorized professionals.
• Any damage caused by manual modifications to the product is not covered by the warranty.
• If this product is used for other purposes than the ones originally intended, or if it is not correctly connected, the product may become damaged and the warranty will be voided.
• Carefully read the following important information regarding installation safety and maintenance.
• Keep this information booklet accessible for further consultations.
• The appliance has been designed for use in the ducting version (external exhaust) or in the filtering version (internal air circulation) cooker hood.
  • Take care when the cooker hood is operating simultaneously with an open fireplace or burner that depends on the environment and are supplied by other than electrical energy, as the cooker hood removes the air from the environment which a burner or fireplace need for combustion.
• Provide adequate ventilation in the environment for a safe operation of the cooker hood.

kunft.

- Regulations concerning the discharge of air must be fulfilled.

- Your cooker hood is for domestic use only; it is not suitable for barbecue, roast shop or other commercial use.

- Any installation work must be carried out by a qualified electrician or competent person.

- Do not use fire for drying your cooker hood.

- If there is any fault with your cooker hood, please call the service department appointed by the agent for servicing.

- Please keep the room well ventilated when your cooker hood and gas hob are working.

- In order to get the most out of your cooker hood, please read the instruction manual before installing and using, and keep it in a safe place.

- Ensure that you obtain our warranty for your cooker hood, please provide the warranty card and purchase receipt, or the warranty will not be offered.

- CAUTION: Accessible parts may become hot when used with cooking appliances.

- Observe the warning in the instruction sheet concerning the operation of the appliance when air is discharged from the room.

- Do not check the filters with the hood working.

• Do not touch the lamps after a prolonged use of the appliance.
• Do not flambé food under the range hood.
• The use of an unprotected flame is dangerous for the filters and could cause a fire.
• Watch the fried food constantly in order to avoid the cooking oil to flare up.
• Before performing any maintenance operation, disconnect the hood from the mains.

kunft.®

2. OPERATING INSTRUCTIONS

2.1. Product Description

• The room should be well-ventilated when the cooker hood is used at the same time as appliances burning gas or other fuels.
• There is risk of fire if the cleaning is not carried out in accordance with the instructions.
• The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels.
• When the range hood is located above a gas appliance, the minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of the rang hood that distance must be at least 65 cm.
• If the supply cord or the LED bulb are damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Regarding the cleaning and maintenance of the appliance, please refer to the section and .

2.1.1 Installation Instructions

Method A:

1) The cooker hood should be placed at a distance of 65-75 cm from the cooking surface for best effect (See Pic 1).
2) To install onto the wall, drill 4 holes with 8 mm on a suitable place according with the centre distance of the hole in the back of the cooker hood (See Pic 2).

Pic 1

Pic 2

Diagram of a kitchen fan with a brick wall component and curved arrows indicating rotation (no text or symbols)

Pic 3

Diagram of a mounted device on a brick wall, showing two circular components and a central hub (no text or symbols)

Pic 4

visor cooker hood KCHS3126 WH

EN

3) Insert the anchors into the holes.
4) Insert the screws into the anchors and tighten them.
5) Put up the cooker hood onto the fixed screws (See Pic 3).
6) Insert the safety screws into the rest anchors and tighten them to fix the body to the wall (See Pic 4).
7) Put the one-way valve onto the cooker hood.

Method B (See Pic 5):

1) Drill 4 holes with 6 mm at the bottom of the hanging cupboard
2) Put the one-way valve on the air outlet of the cooker hood, then install the cooker hood on the bottom of the cupboard, and tighten the cooker hood with the 4 screws included.
3) Install the adjusted board on the bottom of the hood in order to close the gap between the back of the hood and the cupboard.

60cm

70cm

90cm
Pic 5

Note: There are 2 methods for ventilation, "horizontal ventilation" and "vertical ventilation". Please pay attention to the ventilation method when installing.

Horizontal ventilation (See Pic 6A): Please use the cover to seal the outlet on the top, then the air can be vented from the back.

Vertical ventilation (See Pic 6B): Please use the cover to seal the outlet on the back, then the air can be vented from the top.

A

B
Pic 6

2.1.2. Air Ventilation Settings

Outdoor air ventilation: Turn the adjuster to outdoor position (Pic 7A), install the outlet, turn on the cooker hood, then the air will be vented from the outside outlet.

Indoor air ventilation: Turn the adjuster to indoor position (Pic 7B), install the outlet cover, turn on the cooker hood, then the air can be vented from the inside outlet.

kunft.®

Technical line drawings of two electronic components labeled A and C, showing internal wiring or wiring layout (no text or symbols present)

Pic 7

Warning: Failure to install the screws or fixing the device in accordance with these instructions may result in electrical hazards.

2.2. Using the Product

2.2.1. Operation

How to use the control panel (See Pic 8):

a. Press the button "Stop", the motor will stop.
b. Press the button "Low", the motor will run at low speed.
c. Press the button "Mid", the motor will run at medium speed.
d. Press the button "High", the motor will run at high speed.
e. Press the button "Light", the light will switch on. Press the button again; the light will switch off.

Pic 8

2.2.2. LED Light

- If the supply cord or LED bulb are damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

IL COS D code for 2.5W LED light

is DBS-2.5/65-H-120/33

2.5W LED light

2.3. Maintenance

Changing and cleaning the filter:

Remove the filters as shown in the instructions of Picture 10;

- You can clean the filter through the following method:

1. Soak them for about 3 minute in hot water (40-50 degrees) with a grease loosening detergent, and brush it gently with a soft brush. Please, do not apply too much pressure to avoid damaging it.

2. It can be put in the dishwasher with detergent, set the temperature at around 60 degrees.

3. Please do not use abrasive detergents for they will damage the hood;

4. Make sure that the hood is switched off before cleaning it;
5. Clean the filters after approximately 30 hours of use, or at least once a month.

Line drawing of a kitchen air conditioner unit with airflow arrows indicating internal flow (no text or symbols)

3. POST-SALE SERVICE

KUNFT has designed this appliance in order to guarantee maximum reliability. However, if a problem occurs do not attempt to open the appliance - there is a risk of electrical shock. If you are not able to solve the problem, please contact the Costumer Support Service of any Worten, Modelo or Continente store in order to be assisted. Worten Equipamentos para o Lar provides a 2-year warranty for manufacturing defects from the date of purchase of the appliance.

WARNING: Any attempt to repair the appliance without contacting the manufacturer or seller will void the warranty.

All users must be familiar with these instructions. Knowing what could go wrong can help prevent problems from occurring.

kunft.

4. ENViroNMENtaL ProtEctIoN

In order to protect the environment we strive to reduce the volume of packaging used, limiting it to three easily sorted materials: cardboard, paper and plastic. The appliance is manufactured using recyclable materials after disassembled by a specialized company. Please comply with local regulations concerning the recycling of all materials.

14

Estimado cliente:

Simple line drawing of a rectangular box with two circular holes and two vertical arrows, labeled 'A' at the bottom (no text or symbols on the object itself)

Imagen 6

Imagen 8

2.2.2. Luz LED

Line drawing of a kitchen air conditioner unit with airflow arrows indicating internal flow (no text or symbols)

kunft.®

3. SErVlclo PoSVENta

Caro(a) cliente,

1. INSTRUÇÕES DE SEGURANÇA

Diagram of a kitchen fan with a brick wall component and airflow arrows indicating motion (no text or symbols)

Fig. 3

Illustration of a brick wall with two circular components and a central cylindrical object (no text or symbols)

Fig. 4

Simple line drawing of a rectangular box with two circular holes and two side handles, labeled 'A' at the bottom (no text or symbols on the object itself)

Imagen 6

Two technical diagrams of electronic components labeled A and C, showing internal wiring or wiring layout (no text or symbols present)

Technical line drawing of a device with labeled components (B and D), no readable text or symbols present.

Fig. 8

kunft.®

2.2.2. Luz LED

Line drawing of a front air conditioner unit with airflow arrows indicating internal components (no text or symbols)

3. SERVIÇO PÓS-VENDA