SFFPRO2 - Projector OPTOMA - Free user manual and instructions
Find the device manual for free SFFPRO2 OPTOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | OPTOMA |
| Model | SFFPRO2 |
| Product Type | Portable Projector |
| Display Technology | DLP |
| Brightness | 3000 ANSI Lumens |
| Native Resolution | 1920 x 1080 (Full HD) |
| Contrast Ratio | 20,000:1 |
| Aspect Ratio | 16:9 (Native), 4:3 Compatible |
| Lamp Life (Normal Mode) | 5000 Hours |
| Lamp Life (Eco Mode) | 10000 Hours |
| Projection Lens | F/2.42-2.98, f=19.2-21.4mm |
| Zoom Ratio | 1.1x Manual |
| Throw Ratio | 1.13-1.47:1 |
| Keystone Correction | Vertical ±40° (Manual) |
| Input Ports | HDMI 1.4a, VGA (D-Sub 15 pin), USB-A (Power), Audio 3.5mm |
| Output Ports | Audio 3.5mm |
| Built-in Speaker | 10W Mono |
| Noise Level | 30 dB (Eco Mode) |
| Power Consumption | 250W (Max), <0.5W Standby |
| Dimensions (W x D x H) | 29.6 x 22.1 x 9.7 cm |
| Weight | 2.5 kg |
| Projection Size | 30 - 300 Inches |
| 3D Support | Yes (DLP Link) |
| Cleaning Instructions | Use a soft, dry cloth. Do not use abrasive cleaners. |
| Safety Feature | Kensington Lock Slot |
Frequently Asked Questions - SFFPRO2 OPTOMA
How do I replace the lamp in my OPTOMA SFFPRO2 projector?
Turn off the projector and unplug it. Allow it to cool for at least 30 minutes. Slide the lamp cover latch to open, remove the old lamp module, insert the new one, and close the cover. Reset the lamp hour counter in the settings menu.
What is the recommended projection distance for a 100-inch screen?
For a 100-inch diagonal screen, the throw distance is approximately 2.5 to 3.3 meters, depending on the zoom setting. Use the throw ratio of 1.13-1.47:1 to calculate accurately.
Can I connect my smartphone to the OPTOMA SFFPRO2?
Yes, you can connect via an HDMI adapter for supported phones, or use a USB-C to HDMI cable if your phone supports video output. The projector does not support wireless screen mirroring natively.
Does the projector support 4K input?
The native resolution is 1080p (Full HD). It can accept 4K signals, but they will be downscaled to 1080p for display.
How do I clean the air filter?
Turn off the projector and unplug it. Locate the filter cover (usually on the side), remove the filter, and gently vacuum or rinse with water. Let it dry completely before reinserting. Replace the filter every 500 hours.
What should I do if the projector overheats?
Ensure the air vents are not blocked. Clean the air filter if dusty. Place the projector in a well-ventilated area. If the problem persists, the lamp cooling fan may need servicing.
Can I use the projector for outdoor movie nights?
Yes, the 3000 ANSI lumens brightness is sufficient for evening outdoor use. Ensure ambient light is minimal and use a screen for best results.
How do I adjust the keystone correction?
Press the Keystone button on the remote or go to the menu. Use the arrow keys to adjust vertical keystone up to ±40 degrees. For horizontal keystone, this model does not have automatic adjustment.
What type of lamp does the SFFPRO2 use?
It uses a 240W P-VIP lamp. Compatible replacement lamp module: OPTOMA SP.88G01G001.
How do I reset the lamp hour counter?
After replacing the lamp, go to the Service menu, select Lamp Hour Reset, and confirm. This will clear the previous lamp usage history.
User questions about SFFPRO2 OPTOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual SFFPRO2 - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SFFPRO2 by OPTOMA.