OPS72A-i7-8G-256G - Projector OPTOMA - Free user manual and instructions
Find the device manual for free OPS72A-i7-8G-256G OPTOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DLP Projector with Integrated OPS Computer |
| Brand | OPTOMA |
| Model | OPS72A-i7-8G-256G |
| Display Technology | DLP |
| Native Resolution | 1920 x 1080 (Full HD) |
| Brightness | 3500 ANSI Lumens |
| Contrast Ratio | 20,000:1 |
| Lamp Type | UHP Lamp |
| Lamp Life | Up to 10,000 hours (Eco mode) |
| Computer Processor | Intel Core i7 (8th generation) |
| RAM | 8GB DDR4 |
| Storage | 256GB SSD |
| Operating System | Windows 10 Pro |
| Connectivity | HDMI, USB-A, USB-B, VGA, Audio In/Out, RJ45, Wi-Fi 802.11ac, Bluetooth 4.2 |
| Projection Lens | Manual zoom and focus |
| Throw Ratio | 1.5 - 1.8:1 |
| Keystone Correction | Vertical ±30 degrees |
| Built-in Speaker | 10W mono |
| Noise Level | 30 dB (Eco mode) |
| Power Consumption | 280W (typical) |
| Input Power | AC 100-240V, 50/60Hz |
| Dimensions (W x D x H) | 314 x 224 x 100 mm |
| Weight | 4.5 kg |
| Maintenance | Filter cleaning every 1000 hours; lamp replacement as needed |
| Safety Features | Overheat protection, automatic shut-off, Kensington lock slot |
| Spare Parts | Lamp module, air filter, remote control |
Frequently Asked Questions - OPS72A-i7-8G-256G OPTOMA
What is included in the box?
The box includes the projector, power cable, remote control with batteries, VGA cable, user manual, and a quick start guide.
How do I connect the projector to Wi-Fi?
Go to Settings > Network & Internet > Wi-Fi on the Windows interface. Select your network and enter the password.
Can I use the projector without the built-in computer?
Yes, you can use it as a standard projector by connecting external devices via HDMI, VGA, or USB. The OPS computer is optional.
How do I replace the lamp?
Turn off and unplug the projector. Wait 30 minutes to cool. Remove the lamp cover on the side, unscrew the old lamp, and insert a new one. Reset the lamp timer in the menu.
What are the computer specifications?
It features an Intel Core i7 processor, 8GB DDR4 RAM, and a 256GB SSD, running Windows 10 Pro.
How often should I clean the air filter?
Clean the filter every 1000 hours of use. Remove the filter cover, wash with mild soap and water, dry completely, and reinstall.
Is the OPS module removable?
Yes, the OPS module is designed to be replaceable. Unscrew the retaining screws on the rear panel and slide the module out.
What cables are required for setup?
For basic operation, you need the power cable and a video cable (HDMI, VGA, or USB). For network connectivity, use an Ethernet cable or configure Wi-Fi.
How do I update the projector's firmware?
Download the latest firmware from the OPTOMA support website to a USB drive. Insert the drive, go to Menu > Settings > Firmware Update, and follow on-screen instructions.
What should I do if there is no display?
Check that the power cable is connected and the power LED is on. Ensure the correct input source is selected. Verify the connected device is outputting video. Try a different cable or port.
User questions about OPS72A-i7-8G-256G OPTOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual OPS72A-i7-8G-256G - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OPS72A-i7-8G-256G by OPTOMA.