VT-1810 B - Vacuum Cleaner Vitek - Free user manual and instructions

Product Type	2-in-1 Handheld Bagless Vacuum Cleaner & Portable Window Cleaner
Model	VT-1810 B
Brand	Vitek
Power Supply (Vacuum)	220-240 V ~ 50 Hz
Power Consumption (Vacuum)	1000 W
Suction Power (Vacuum)	100 W
Dust Bin Capacity	0.7 L
Operating Life	2 years
Weight (approx.)	1.5 kg
Dimensions (approx.)	30 x 15 x 15 cm
Included Attachments (Vacuum)	Crevice nozzle, small brush, floor/carpet brush, 3 plastic extension pipes, plastic connector
Window Cleaner Features	Rechargeable battery (4.2 V, 600 mA charger), water tank (120 ml), microfiber sprayer attachment, wide and narrow attachments
Battery Charging Time	4 hours
Filter Type	Outlet filter (washable)
Maintenance	Clean dust bin after each use; wash filters every 3-4 months; do not immerse body in water
Safety Features	RCD recommended; auto shut-off when battery low (window cleaner); dust bin must be installed for operation
Usage Restrictions	Do not collect flammable liquids, hot ashes, fine dust (plaster, concrete); keep away from children under 8
Guarantee	2 years, subject to terms from dealer

Frequently Asked Questions - VT-1810 B Vitek

How do I assemble the vacuum cleaner for floor cleaning?

Insert the plastic connector into the air inlet until it clicks. Attach one or two extension pipes, then attach the floor/carpet brush. Ensure the dust bin and filter are properly installed before use.

How do I clean the dust bin and filters?

Switch off and unplug the vacuum. Remove the dust bin by pressing the clamp button. Open the lower lid to empty debris. To fully clean, open the upper lid, remove the outlet filter and separator, wash all parts under running water, dry thoroughly, and reassemble.

Can I use the vacuum to pick up liquids?

No. The vacuum cleaner is for dry pick-up only. Do not use it to collect water, flammable liquids, or any moisture. The window cleaner function is separate for liquids.

How do I charge the window cleaner battery?

Remove the water tank, open the battery compartment, take out the battery, and insert it into the charger (polarity marked). Plug the charger into the mains; the red indicator lights. When green, charging is complete (approx. 4 hours).

What attachments are included and what are they for?

Included: crevice nozzle (for corners/radiators), small brush (for furniture), floor/carpet brush (for floors), three extension pipes (for reach), and a plastic connector. For window cleaning: wide and narrow attachments, and a microfiber sprayer.

Can I use the window cleaner without the spray function?

Yes. You can simply wipe the surface with the attachment. However, for best results, apply cleaning agent using the sprayer handle before wiping.

How often should I clean the filters?

Clean the outlet filter at least 3-4 times a year, or more frequently if heavily clogged. The dust bin should be emptied after every use.

What should I do if the vacuum suction power drops suddenly?

Immediately switch off and unplug. Check the extension pipes and nozzle for blockages. Also inspect the dust bin and filter for clogs. Clear any obstructions before resuming use.

Is the vacuum suitable for use on stairs?

Yes, but exercise caution. The manual advises special care when cleaning stair landings to avoid falls or damage.

What is the warranty period and how do I claim?

The unit has a 2-year operating life. Warranty details are provided by the dealer; you must present the purchase receipt or bill of sale for any claims.

USER MANUAL VT-1810 B Vitek

Handheld bagless vacuum cleaner/ Portable window cleaner

Handheld bagless vacuum cleaner VT-1810

This unit is intended for room cleaning

Instruction manual

Description

1. Crevice nozzle
2. Air inlet
3. Attachment clamp
4. Dust bin lid
5. Dust bin lid clamp
6. Dust bin
7. Dust bin lower lid
8. Lower lid clamp
9. Dust bin clamp button
10. On/Off button
11. Vacuum cleaner handle
12. Outlet filter
13. Separator
14. Small brush
15. Floor/carpet brush
16. Plastic extension pipes
17. Plastic connector

ATTENTION!

For additional protection you can install a residual current device (RCD) with nominal operation current not exceeding 30 mA into the mains; contact a specialist for installation.

RECOMMENDATIONS ON SAFETY MEASURES

Read this instruction manual carefully before using the unit and keep it for the whole operation period. Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.

To avoid hazard of electric shock, fire and injury, follow the recommendations specified below.

• Use the unit in strict accordance with the instruction manual.
• Before connecting the unit to the mains, make sure that the voltage specified on the unit corresponds to your home mains voltage.
• To avoid fire, do not use adapters for connecting the unit to the mains.
• Do not leave the plugged in vacuum cleaner unattended.
• To reduce hazard of electric shock, do not use the vacuum cleaner outdoors.

• Unplug the unit before cleaning or when you do not use it.

• Do not touch the plug or the body of the vacuum cleaner with wet hands.

• Do not cover the unit outlet with any objects.
• Do not switch the unit on if any of its air openings are blocked.
• Keep hair, free hanging clothes, fingers and other parts of your body away from the vacuum cleaner suction opening.
• When disconnecting the power plug from the mains, do not pull the cord, but hold the plug with your hand.
• Be especially cautious while cleaning the stair landings.
• Do not use the vacuum cleaner for collecting such inflammable liquids as gasoline or solvents. Do not use the vacuum cleaner in places where such liquids are stored.
• Do not use the vacuum cleaner for collecting burning or smoking cigarettes, matches, cinders as well as fine dust, for example, of plaster, concrete, flour or ashes.
• Do not use the vacuum cleaner, if:
• the dust bin is not installed or improperly assembled;
• the outlet filter is not installed.
• Make sure regularly that the plug and the power cord are not damaged.
• Do not touch the power cord or the power plug with wet hands as it may cause electric shock.
• This unit is not intended for usage by children under 8 years of age.
• Do not allow children to use the unit as a toy and do not allow them to touch the unit body and the power cord during the operation. During the operation and the breaks between operation cycles, the unit should be placed out of reach of children under 8 years of age.
• This unit is not intended for usage by people (including children over 8) with physical, neural and mental disorders or with insufficient experience or knowledge. Such persons can use this unit only if they are under supervision of a person who is responsible for their safety and if they are given all the necessary and understandable instructions concerning the safe usage of the unit and information about danger that can be caused by its improper usage.
• For children safety reasons do not leave polyethylene bags, used as a packaging, unattended.

ENGLISH

• Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
• Do not use the power cord for carrying the vacuum cleaner, do not close the door if the power cord runs through the doorway, do not let the power cord come in contact with sharp corners or edges of furniture.
• Never use the unit if the power plug or the power cord is damaged, if the unit works improperly or after it was dropped. Do not try to repair the unit by yourself. Contact an authorized service center for all repair issues.
• Transport the unit in the original package only.
• Keep the unit out of reach of children and disabled persons.

• If the suction power of the vacuum cleaner decreases rapidly while cleaning, switch the vacuum cleaner off immediately, take the power plug out of the socket and check the plastic pipes for obstruction. Remove the obstruction and only then you can continue cleaning.
• Do not use the vacuum cleaner near hot surfaces, ashtrays and in places where inflammable liquids are stored.

ASSEMBLING THE VACUUM CLEANER

After unit transportation or storage at low temperature, it is necessary to keep it for at least two hours at room temperature.

• Unpack the vacuum cleaner completely and check it for damages. In case of any damages do not switch the vacuum cleaner on or use it.
• Before switching the vacuum cleaner on for the first time make sure that your home mains voltage corresponds to the vacuum cleaner operating voltage.
• Always switch the vacuum cleaner off and take the power plug out of the socket while replacing the brush attachments and before maintenance.

Plastic extension pipes (16)

- Insert the plastic connector (17) into the air inlet of the dust bin, matching the ledge on the

connector with the groove in the air inlet until the clamp (3) clicks.

• You can use one or two extension pipes when operating the unit. To connect the pipes, insert the narrow part of one pipe into the flare end of the other one.
• Select the required attachment: floor/carpet brush (15) or crevice nozzle (1) and attach it to the extension pipe (16). For the operation with the small brush (14) fix it on the crevice nozzle (1).

Note:

- If necessary, you can attach the floor/carpet brush (15) straight to the connector, without using the plastic extension pipes. The crevice nozzle (1) is inserted directly in the air inlet without the connector.

Floor/carpet brush (15)

Small brush (14)

The small brush (14) is intended for cleaning furniture surface, protective pile prevents damage of polished furniture surface.

Crevice nozzle (1)

This attachment is intended for cleaning of radiators, grooves, corners and spaces between cushions.

Note:

Always switch the vacuum cleaner off and take the power plug out of the socket before replacing the brush attachments and before cleaning the dust bin (6).

USING THE VACUUM CLEANER

Attention! You may switch the vacuum cleaner on only with the dust bin (6) and the outlet filter (12) installed. Always check whether the dust bin (6) is assembled correctly and the outlet filter (12) is installed properly.

• Insert the power plug into the mains socket.
• Press the on/off button (10) to switch the vacuum cleaner on.
• After the unit operation switch the vacuum cleaner off by pressing the button (10) and unplug the unit.
• Use the handle (11) for carrying the vacuum cleaner.

ENGLISH

Maintenance

Taking off the dust bin (6) and removing dust and garbage from it

• Switch the vacuum cleaner off and unplug it.
• Holding the dust bin (6), press the dust bin clamp button (9) and take the bin off.
• Open the dust bin lower lid (7) by pressing the clamp (8) downwards.
• Remove accumulated dust and garbage from the dust bin.

Note:

It is recommended to clean the dust bin after every use of the vacuum cleaner.

Disassembling and cleaning of the dust bin

• Switch the vacuum cleaner off and unplug it, take the dust bin out, remove dust and garbage from it, close the lower lid.
• Pull the clamp of the upper lid (5) towards yourself and open the upper lid.
• Remove the outlet filter (12) and clean it from dust.
• Holding the dust bin (6) by the flask, take the separator (13) and turn it counterclockwise, then take it out of the flask.
• Wash the flask (6), the outlet filter (12) and the separator (13) under running water jet.

Note: Dry all the parts thoroughly before assembling the dust bin.

• Match the ledges on the separator (13) with the grooves of the flask (6) and turn the separator clockwise until fixing.
  • Install the filter (12) back to its place.
• Close the dust bin upper lid, having matched the ledge on the lid with the groove on the flask.
  • Install the dust bin (6) back to its place.

Attention! Keep the filters clean as the vacuum cleaner operation efficiency depends on it; clean the filters not less than 3-4 times a year, and more often at severe obstruction.

Cleaning the vacuum cleaner body

• Clean the vacuum cleaner body with a soft, slightly damp cloth and then wipe it dry.
• Do not immerse the body of the vacuum cleaner, the power cord and the power plug of the unit into water or other liquids. Provide

that no liquid gets inside the vacuum cleaner body.

- Never use solvents or abrasives to clean the surface of the vacuum cleaner.

Storage

• Before taking the vacuum cleaner away for storage, clean its body and the dust bin.
• Keep the vacuum cleaner away from children in a dry cool place.

Delivery set

1. Vacuum cleaner (with filters and dust bin installed) - 1 pc.
2. Plastic extension pipes - 3 pcs.
3. Plastic connector - 1 pc.
4. Crevice nozzle - 1 pc.
5. Small brush - 1 pc.
6. Floor/carpet brush - 1 pc.
7. Instruction manual - 1 pc.

Technical specifications

Power supply: 220-240 V \~ 50 Hz

Power consumption: 1000 W

Suction power: 100 W

Dust bin capacity - 0.7 l

The manufacturer preserves the right to change design and specifications of the unit without a preliminary notification

Unit operating life is 2 years

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as

laid down by the Council Directive 2004/108/EC and

to the Low Voltage Regulation (2006/95/EC)

русский

The unit is intended for collecting moisture, washing and cleaning windows, mirrors and tile (ceramic) coverings.

Description

1. Microfiber sprayer attachment
2. Attachment holder (1)
3. Sprayer
4. Sprayer handle
5. Sprayer flask
6. Charger
7. Charging indicator
8. Narrow attachment (160 mm)
9. Wide attachment (280 mm)
10. Attachment lock
11. On/Off button
12. Operation indicator
13. Unit body
14. Battery
15. Battery compartment lid
16. Water tank lock
17. Water collecting tank
18. Rubber plug

PRECAUTIONS

Read this instruction manual carefully before using the unit and keep it for the whole operation period. Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.

To reduce the risk of fire and to prevent electric shock or other injuries it is necessary to observe the following safety measures when using the unit.

• This unit is intended only for collecting moisture, washing and cleaning windows, mirrors and tile (ceramic) coverings.
• Use only the attachments supplied.
• Do not use the unit for collecting of such highly inflammable liquids as gasoline and solvents, do not use the unit in the places where such liquids are stored.
• Do not turn over the unit during operation.
• The unit is not intended for collecting large amounts of water from horizontal surfaces, such as liquid spilled out from a tipped glass, or liquid products, such as soup, eggs, ice cream etc.

• Always switch the unit off after the use, during cleaning or changing the attachments.

• Before charging the battery for the first time, make sure that the voltage in your mains corresponds to the operating voltage of the charger.

• Do not charge the battery in places with high humidity or high temperature. Charge the battery at the temperature from 0^ to +35^ and relative humidity not more than 80% .
• Do not switch the unit on if any of its openings are blocked.
• Use the unit only with regular alcohol-free window cleaners.
• Do not direct the spray jet into the eyes.
• Do not direct the spray jet on electric house appliances, this may lead to electric shock.
• Do not block the ventilation openings of the unit. Do not let foreign objects get into unit openings.
• Do not touch the power cord or the charger plug with wet hands, this may cause electric shock.
• Always unplug the unit if you do not use it or if you are going to remove the attachment for cleaning.
• Do not immerse the unit into water or any other liquids.
• Close supervision is necessary when children under 8 years of age or disabled persons are near the operating unit.
• This unit is not intended for usage by children under 8 years of age.
• This unit is not intended for usage by people (including children over 8) with physical, neural, mental disorders or with insufficient experience or knowledge. Such persons can use this unit only if they are under supervision of a person who is responsible for their safety and if they are given all the necessary and understandable instructions concerning the safe usage of the unit and information about danger that can be caused by its improper usage.
• Do not leave children unattended not to let them use the unit as a toy.
• For children safety reasons do not leave polyethylene bags, used as a packaging, unattended.

Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

ENGLISH

• To avoid damages, transport the unit in original package only.
• Watch over the batteries. Remove the batteries from the battery compartment if you are not going to use the unit for a long time.
• Keep the unit in a dry cool place out of reach of children and disabled persons.

After unit transportation or storage at low temperature, it is necessary to keep it for at least two hours at room temperature before switching on.

Battery charging

Before using the unit for the first time or after a long period of inactivity, the battery needs to be charged for 4 hours.

• Remove the water tank (17) by pulling the lock (16) towards you (pic. 1).
• Open the battery compartment lid and remove the battery (14) (pic. 2).
  • Install the battery (14) into the charger (6), strictly following the polarity (pic. 3).
• Insert the power plug into the mains socket, the indicator (7) will light up red.
• When the charging cycle is finished, the indicator (7) will light green. The battery is charged.

Notes:

- Charge the battery at the temperature from 0^ C to +35^ C.

- If you haven't used the unit for a month or longer, charge the battery completely before using.

Attention!

Battery leakage can cause injuries or damage the unit. To avoid damages, follow the recommendations specified below:

• insert the battery following the polarity;
• remove the battery if you are not planning to use the unit for a long time;
• do not dismantle the battery, do not subject it to high temperatures.

Assembling the sprayer

• Install the attachment holder (2) on the sprayer (3), matching the ledges on the sprayer (3) with the notches on the attachment (2) and fix it till clicking of the locks, as shown on the picture 4.
  • Install and fix the attachment (1) on the holder (2) as shown on the picture 5.
• Unscrew and remove the sprayer (3) from the flask (5) (pic. 6).
• Pour the cleaning agent into the sprayer flask (5).
  • Install the sprayer back to its place.

Using the unit

• Select and install the required attachment (8 or 9) till clicking of the lock (pic. 7).
• Check if the battery (14) is installed properly.
• Pressing the sprayer handle (4), apply the cleaning agent evenly on the surface and then wipe the surface with the attachment (1) (pic. 8).

Note: Wash the attachment (1) under a warm water jet as it becomes dirty.

• Switch the unit on by pressing the button (11), the operation indicator (12) will light up.
• To collect the liquid from the surface, move the unit downwards.

Note: You may clean hard-to-reach surfaces in horizontal position for a short period of time.

Attention!

If the battery (14) is low, the operation indicator (12) starts blinking slowly and after some time the unit will be switched off automatically. During the breaks between cleaning cycles switch the unit off; this allows to significantly prolong the operation time of the unit within one battery charging cycle.

Pour the dirty water out of the water tank as it is filled up.

• After you finish the operation, switch the unit off by pressing the button (11) and clean the unit.
• Pour the dirty water out of the water tank (17) as it is filled up; to do this, switch the unit off by pressing the button (11), remove the water tank by pulling the lock (16) towards you and then remove the rubber plug (18) and pour the water out (pic. 9).

ENGLISH

- Close the tank (17) with the plug and install it back to its place.

Cleaning and care

Before cleaning the unit, switch it off by pressing the button (11).
- Remove the water tank by pulling the lock (16) towards you and then remove the rubber plug (18) and pour the water out (pic. 9).
- Wash the water tank under a warm water jet and let it dry.
- Close the tank (17) with the plug and install it back to its place.
- Remove the installed attachment (8 or 9) by pressing the attachment lock (10) button and pulling the attachment towards you (pic. 10).
- Wash the attachments (8 and 9) under warm water jet and let them dry.
- Wipe the unit body with a damp cloth.
- Wash and dry the sprayer flask (5).
- Remove the attachment (1), wash it under a warm water jet, then dry it thoroughly.

Unit body

• Wipe the unit body with a soft damp cloth.
• Never immerse the unit body into water or other liquids. Provide that no water gets inside the unit body.
• Use soft detergents to remove dirt; do not use metal brushes and abrasive detergents.
• Do not put the attachments and the sprayer flask in a dishwashing machine.
• Keep the unit away from children in a dry cool place.

Delivery set

1. Sprayer set with attachment - 1 pc.
2. Charger - 1 pc.
3. Battery - 1 pc.
4. Attachments - 2 pc.
5. Window cleaning device - 1 pc.
6. Instruction manual - 1 pc.

Technical specifications

Charger power supply: 100-240 V, \~ 50/60 Hz Charger output voltage: (direct current) 4,2 V, 600 mA

Maximal power: 12 W

Water collecting tank: 120 ml

Unit operating life is 2 years

The manufacturer preserves the right to change design and specifications of the unit without a preliminary notification.

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 2004/108/EC and to the Low Voltage Regulation (2006/95/EC)

русский

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxx means that the item was manufactured in June (the sixth month) 2006.

DE