2 in 1 Professional Steam Mop - Steam cleaner FAKIR - Free user manual and instructions

Product Type	2 in 1 Steam Mop (Floor Mop + Handheld Steamer)
Brand	Fakir
Model	2 in 1 Professional Steam Mop
Voltage	220-240 V, 50 Hz
Power	1550 Watts
Water Tank Capacity	300 ml
Steam Settings	Dust, Mop, Scrub (3 levels)
Steam Preheat Time	Approximately 30 seconds
Mop Heads Included	All-Purpose Mop Head (rectangular), Triangle Mop Head
Cleaning Pads	Microfiber pad (two-sided), All-Purpose Scrubber Pad
Accessories	Direct Steam Nozzle, Garment Steamer with bristle frame, Upholstery Bonnet, Flat Scrubber Tool, Accessory Hose, Window Squeeze, Carpet Glider, Filling Flask
Suitable Floor Types	Laminate, Bamboo, Hardwood (waterproof), Carpet (with glider), Marble, Tile, Parquet, Linoleum, Ceramic, Stone
Safety Features	Auto shut-off when not in use (indicator blinks), cool-down before changing pads, do not immerse in water
Maintenance	Wash microfiber pads separately with liquid detergent; clean steam nozzle with metal wire if clogged
Dimensions (approx.)	Height 120 cm, Width 30 cm, Depth 25 cm (estimated)
Weight (approx.)	3 kg (estimated)
Warranty	Not specified; refer to authorized Fakir service
Usage Life	10 years
Recyclability	Device and packaging recyclable according to local regulations

Frequently Asked Questions - 2 in 1 Professional Steam Mop FAKIR

Why does my Fakir 2 in 1 Steam Mop not turn on?

Ensure it is plugged securely into a 220-240V AC outlet. Check the fuse or circuit breaker. If it still does not work, contact an authorized Fakir service center.

Why is no steam coming out?

Check if the water tank is empty. If so, refill it. Also inspect the steam nozzle for blockages. If these are fine, contact Fakir service.

Why does my steam mop leave excess water on the floor?

The cleaning pad may be too wet. Replace it with a dry one. Ensure the pad is correctly attached. Also allow the mop to heat up for 30 seconds before use to ensure steam is hot.

Why is the steam mop hard to push?

Make sure the cleaning pad is correctly attached and not excessively dirty or wet. Replace the pad if needed.

Why are my floors streaky or cloudy after steaming?

The cleaning pad might be dirty. Replace it. If you washed the pad with powder detergent, residue may remain; wash again with liquid detergent. For greasy areas like kitchens, pre-clean with a degreaser. Avoid leaving the mop in one spot too long.

Can I use the steam mop on carpets?

Yes, but only with the carpet glider accessory attached to the rectangular mop head. It is designed for deodorizing and freshening, not stain removal.

How do I clean the handheld steamer nozzle?

Unplug the unit and allow it to cool. Use a small diameter metal wire (or the provided cleaning tool) to gently remove mineral deposits from the nozzle.

How do I wash the microfiber cleaning pads?

Wash separately from other fabrics to avoid lint. Use only liquid detergent; no powder detergent, fabric softener, or bleach. If threads appear, carefully cut them with scissors; do not pull.

What water should I use?

Tap water is acceptable, but if you have hard water, we recommend using distilled water to prevent mineral buildup and improve performance.

How do I store the steam mop after use?

Unplug and allow to cool completely. Remove the cleaning pad. Store upright in a cool, dry place. Do not store with a damp pad attached.

USER MANUAL 2 in 1 Professional Steam Mop FAKIR

Exterior view of a modern electric vacuum cleaner with a mesh base (no text or symbols visible)

Kullanım Kulavuzı

TR

GENEL

Line drawing of a human face with blue motion lines indicating movement or pressure (no text or symbols)

(Sukl 6)

Line drawing of a handheld vacuum cleaner with a handle and lever mechanism (no text or symbols)

UYARI

Illustration of a hand using an electric shaver to smoke or exhaust (no text or symbols)

Line drawing of a robotic arm emitting blue light, no text or symbols present

D Üçgen buhar başlığını takarken veya çıkarırken kesinlikle buhar tetiğine basmayınız! Üçgen buhar başlığını takmadan hortumu kesinlikle kullanmayınız! 

BAKIM

TR

Bakım ve Muhafaza


Line drawing of a medical or laboratory device with a blue arrow indicating a specific point (no text or symbols present)

  |Şekl 281 

NOT

Portatif buharlı temizleyiciyi yerine takmadan önce tüm aparatlarının çıkarılmış olduğundan emin olunuz! 1. Portatlı buharlı temizleyici ile temizleme İşleminiz bittikten sonra yerine yerleştiriniz. (Şekil 26) 2. Temizleme işleminiz bittiyyse, gösterge mavi yanıp sönene kadar açma kapama tuşuna basınız. Cihaz kapanacaktır. Fisli bağlantı kablosunu prizden çokiniz ve dik bir konuma getiriniz. Daha sonra cihazın soğuması için 3-5 dakika bekleyınız. Temizlik bezini lila halkadan tutarak çıkarabilirsiniz, bez sıcak TR

KULLANIM

Mikrofiber temizlik bezini herzaman yeni gibi muhafaza ediniz. 

Pure technical line drawing of mechanical components without any text, numbers, or symbols

  1. Mikrofiber temizlik bezini tüy ve lif toplamaması için diğer bezlerden ayrı olarak tek yıkanmasını tavsiye ediyoruz. Sadece sıvı deterjan kullanınız (kesinlikle toz deterjan kullanmayınız). Yumuşatıcı ve çamaşır suyu kullanmayınız. 2. Temizlik bezinde iplikler oluşursa, bu ipleri dikkatlı bir şekilde makas vasıtası ile kesiniz. Kesinlikle ipleri çekmeyiniz veya ipleri dipten kesmeyiniz. (Şekil 31) 

Illustration of a finger being held by a pen, with an arrow indicating force direction (no text or symbols)

Buhar ucunun bakımı

1. Portatif buharlı temizleyici normalde bir bakım gereksinimi duymaz eğer buhar çıkışında bir azalma gözlemlerseniz, buhar ucunda oluşan kalıntıları temizlemeniz gerekmektedir. 2. Cihazın fişini prizden çekiniz. 3. Buhar ucuna küçük çaplı blir metal sokarak lleri gerl hareket ile kalıntıları temizleyebilirsiniz. (Sakil 32) 4. Cihazın fişini prize takarak buhar çıkışıni kontrol ediniz.

BAKIM

TR

Sorun	Muhtemel sebep & Çözüm
2in1 Professional Steam Mop Çalışmıyor	• Cihazını sadece 230V AC prizine bağlayınız.• Prizin bağlı olduğu sigortayı kontrol edin.• Cihaz çalışmıyor ise yetkili bir Fakir servisine başvurun.
2in1 Professional Steam Mop buhar üretmiyor	• Yer aparatı veya buhar ucu tıkanmış olabilir, kontrol edin.• Su haznesinde su yok ise, kullanma talimatlarına uygun su haznesine su ekleyin.• Buhar hala yok ise yetkili bir Fakir servisine başvurun.
2in1 Professional Steam Mopyüzeylerde su bırakıyor	• Mikroflber temizlik bezini aşırın ıslaklığa dair kontrol edin. Bu durumda cihazın fişini prizdon cokiniz ve kuru bir temizlik bezi ile değiştiriniz.• Mikroflber temizlik bezinin doğru takılı olduğundan emin olunuz.• Cihazını çalıştırdıktan sonra 30 sn geçmiş olmalıdır aksi halde buhar sıcaklığı düşük olacağından az miktarda su birkebilir.
2in1 Professional Steam Mop kolay hareket etmiyor	• Cihazı doğru birleştirildiğinden, özellikle temizlik başlığının, emin olunuz.• Temizlik başlığını aşırın kirlenmeyo karşı kontrol odin.• Temizleme bezi çok kirli veya ıslak ise yenisi ile değiştiriniz.
Yüzeyler temizlik sonrası ıslak, çizik veya kirli	• Mikroflber temizlik bezi kirli olabilir. Bezin kullanım yüzünü veya bezil değiştiriniz.• Mikroflber temizlik bezini toz deterjan ile yıkadıysanız, beze zarar vermiş olablırısınız.• Muttak gibi aşırı yağıt olan bölgelerde 2in1 Professional Steam Mop kullanmadan önce, belli olan bölgelere sıvı deterjan ve bez ile ön temizlik yapmanız gerekebilir.• Cihazı aynı noktada uzun süreli bırakmış olabilirsiniz.• Kullandığınız suyun sortlik oranı yüksek ise, cihazı kaynatılmış su ile kullanmanızı tavsiye ediyoruz.

Gerl Dönüşüm Clna Zurkohm   nrünün bitmesi halinde, elektrik kablosunu keserek kullanılamayacak hale getiriniz. Elektriksel atıklar, normal çöplerle birlikte atılmamalıdır. Ülkenizde mevcut bulunan yasalara göre, bu tür cihazlar için özel olarak belirlenmiş çöp kutularına cihazı bırakınız. Cihazın paketleme elemanları geri dönüşüme uygun maddelerden üretilmiştir. Bunları geri dönüşüm çöp kutularına atınız. Fakir 2 In 1 Professional Steam Mop Buharlı Temizleyici ile temizliğe başlamadan önce, 

Exterior view of a modern vacuum cleaner with attached air filter and two other propeller devices (no text or symbols visible)

NOTLAR

EN

GENERAL

Information about the operating instructions

Thank you for purchasing Fakir 2 in 1 Professional Steam Mop Steam Cleaner. It was developed and manufactured to work reliably for many years. These operating instructions are intended to enable the sale and proper handling and operation of the appliance. Read these operating instructions carefully before using the appliance for the first time. Keep the operating instructions in a safe place. Include these operating instructions when passing the appliance on to another user.

Sorumluluk

Fakir Elektrikli Ev Aletleri Dış Tic. A.Ş. will accept no liability for damages resulting from failure to comply with the operating instructions. Fakir Elektrikli Ev Aletleri Dış Tic. A.Ş. cannot assume any liability in case the appliance is used for other purposes than its intended use or handled, repaired or serviced improperly.

Important Safeguards


WARNING!

Indicates notices which, if ignored, can result in risk of in jury or death. 

ATTENTION!

Indicates notices of risks that can result in damage to the appliance. 

NOTICE!

Emphasizes tips and other useful information in the operating instructions.

SAFETY


CE Declaration of Conformity

This appliance fulfills the requirements of the Appliance and Product Safety Law (GPSG) and the EU Directives. 2004/108/EC "Electromagnetic Compatibility" and 2006/95/EC "Low-Voltage Directive". The appliance bears the CE mark on the rating plate.

Safety Is Important

For yours and others safety please read the instructions before using the appliance. Please keep this instruction in a safe place for the further use. If you pass the appliance on, pass on the instructions too. Remove all packaging, but keep it until you are satisfied that the appliance is working.

Usage Area

This appliance is suitable for home usage. Do not use appliance for other than intended use and never use this appliance outdoors.

Unauthorized Use

The examples of unauthorized use listed here can result in malfunctions, damage to the appliance or personal injury: This appliance is not designed to be used by persons (including children) with limited physical, sensory or mental capacities or by persons lacking in experience and/or knowledge, unless they are supervised by someone who is responsible for their safety or have received instructions on how to use the appliance. Children should be supervised to ensure that they do not play with the appliance. Children should be supervised to ensure that they do not play with the appliance. Home appliances are not toys for children! Therefore, use and store the appliance away from the reach of children. Children do not recognize the danger involved with handling an appliance. Keep packaging films away from children - danger of suffocation!

Safety Instructions

1. Use the system only for its intended use. 2. DO NOT use outdoors. 3. DO NOT leave the appliance unattended when plugged in. Always unplug the power cord from the electrical outlet when not in use and before servicing. 4. DO NOT allow the appliance to be used by children. Close attention is necessary when used by or near children, pets EN

SAFETY

7. DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped or damaged. To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on your own. Incorrect re-assembly or repair can cause a risk of electrical shock or injury to persons when the appliance is used, please refer to Fakir authorized technical service. 8. To protect against a risk of electric shock, DO NOT immerse the steam mop into water or any other liquids. 9. DO NOT handle plug or steam mop with wet hands or operate appliance without shoes. 10. DO NOT pull or carry by power cord, use power cord as handle, close a door on the power cord, or pull the power cord around sharp edges or corners. Keep power cord away from heated surfaces. 11. DO NOT unplug by pulling on power cord. To unplug, grasp the plug not the power cord. Do not use extension cords or outlets with inadequate current carrying capacity. 12. DO NOT put any objects into openings. Do not use with any opening blocked. 13. DO NOT put hands or feet under the steam mop. Unit gets very hot. 14. DO NOT use on leather, wax polished furniture or floors, synthetic fabrics, velvet or other delicate, steam sensitive materials. 15. DO NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance as this may damage the unit or make it unsafe for use. If you live in a hard water area, we recommend using distilled water in your steam mop. 16. When in use, NEVER turn the appliance over or on its side. 17. NEVER DIRECT STEAM TOWARDS PEOPLE, ANIMALS OR PLANTS. 18. NEVER LEAVE THE STEAM MOP IN ONE SPOT ON ANY SURFACE FOR ANY PERIOD OF TIME WHEN MICRO-

SAFETY

 19. Carefully remove the microfiber pocket immediately after you have unplugged and allowed the appliance to cool. 20. When cleaning the steam mop, unplug the power cord from the electrical outlet and clean with a dry or damp cloth. Do not pour water or use alcohol, benzene or paint thinner on the unit. 21. Extreme caution should be exercised when using this appliance to clean stairs. Never use steam mop without microfiber pocket attached. 22. Store steam mop indoors in a cool, dry place. 23. To avoid circuit overload, do not operate another appliance on the same socket (circuit) as the steam cleaner. 24. If an extension cord is absolutely necessary, an extension cord rated a minimum of 2.5 mm^2 cord and 4m in length should be used. Cords rated for less amperage may overheat. Care should be taken to arrange cord so that it can not be pulled or tripped over. 25. DO NOT leave the appliance unattended when the system is connected to a power supply/electrical outlet. 26. DO NOT store unit with damp or wet microfiber cleaning pocket attached. Never leave the steam mop in one spot on any surface for any period of time with a damp or wet microfiber cleaning pocket attached as this will damage your floors. 27. Always unplug and allow the appliance to cool before removing or changing mop heads. 

WARNING!

2 in 1 Professional Steam Mop is designed to clean hard floor surfaces and to create a hygienic environment. It is not recommend to use it on wooden floors which are sensitive to water (passes water inside). Long term use on a fixed point of polished surfaces, may let the surface lose its brightness. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use

EN

DESCRIPTION

Product Decription

 a Mop Handle b Steam Trigger c Removable Handheld Steamer d Handheld Steamer Housing e All-Purpose Mop Head f Two-Sided Micro-Fibre Cleaning Pad for the All-Purpose Mop Head g Two-Sided All-Purpose Cleaning Pad for the All-Purpose Mop Head h Carpet Glider Triangle Mop Head j Two-Sided Micro-Fibre Cleaning Pad for the Triangle Mop Head k Accessory Hose Direct Steam Nozzle m Flat Scrubber Tool All-Purpose Scrubber Pad for Flat Scrubber Tool D Garment Steamer and Bristle Frame p Garment Steamer Bonnet a Upholstery Bonnet Filling Flask 5 6mm x 48mm Screw t Window squeeze u Clips   

DESCRIPTION

EN

Accessories

 (No. 1)  (Fig. 2)    (Fg. 3B) (Fg. 3C)  

Direct steam nozzle

Loosen and dislodge compact dirt found in corners or tight places. (Fig. 1)

Garment steamer and bristle frame

This is ideal for removing wrinkles from clothing and freshening and grooming upholstery. (Fig. 2)

Flat scrubber tool and hose

Use with the accessory hose to clean a variety of surfaces such as counter tops, walls, mirrors and windows. (Fig. 3)

Window squeeze

The accessory is ideal for cleaning glass surfaces. (Fig. 3A)

Floor cleaning heads

Rectangular floor cleaning head easily cleans large surfaces double side pad with a single movement heading. (Fig. 3B) Triangle cleaning head easily cleans hard to reach spots. (Fig. 3C)

Controls

1. Steam trigger: When using the Handheld Steamer, press and hold the steam trigger to start steaming. (Fig. 4) 2. Steam settings: 2 in 1 Professional Steam Mop has three unique settings that can be used when mopping your floors. The handheld steamer is programmed to function also in 3 steam settings due to 

ASSEMBLYING

Assemblying appliance

When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you buy them, so you get a quality Fakir 2 in 1 Professional Steam Mop. 

Technical line drawing of a mechanical device with three views (Fig. 1, Fig. 2), showing a lever mechanism and adjustment arrows (no text or symbols)

1. Insert the Mop Handle end labeled "Front" into the Steam Mop Housing. Make sure it is inserted past the line printed on the pole.  Always make sure the mop is Unplugged from the

ASSEMBLYING

EN

 3. Select either the All-Purpose Mop Head or the Triangle Mop Head and accompanying cleaning pad. Slide the mop head into the pad pocket. Then secure the quick fasteners on the top of the pocket to lock in place. (Fig. 3) 4. Snap the mop head into the mop body by lining up the  Do not leave the appliance unattended during use. 

USAGE

Technical Specifications Voltage : 220-240V, 50Hz Power:1550 Watt Water tank capacity : 300 ml Usage life : 10 years  

Illustration of a medical procedure with blue arrows indicating force or point of motion (no text or symbols)

Fig. 81 1. Pull and twist the quick release cord holder to unwrap the power cord completely. Plug into electrical outlet. (Fig. 7) It might take longer than the normal 30 seconds to start steaming. 2. The On/Steam Setting button will be blue. If the light does not turn on, reference the troubleshooting option on page V

USAGE

EN

 3. Press the On/Steam Setting button once for Dust setting (Dust lighted setting indicator will flash and turn solid blue when it is ready to use). Press the On/Steam Setting button twice for Mop. (Fig. 9)  Press the On/Steam Settingbutton three times for Scrub. (Fig. 10)  4. Clean your floors with a forward and backward motion. (Fig. 11) EN USAGE

Setting	Suitable Surfaces Recommended Usage
1. stageDUST	LaminateBambooHard wood (water proof)Carpet(with Carpet Glider)	Light cleaning and dustingSanitise floorsLoosen and lift light dirtFreshen area rugs and carpets
2. stageMOP	MarbleTileParquetLinoleum (PVC)	Basic, everyday cleaningRemove spots and smaller messesClean moderate and heavily-trafficked areasSanitise floors
3. stageSCRUB	CeramicTileStone	Tough cleaning and removal of stuck-on messos and stainsDeep clean heavily-trafficked areasCut through heavy dirt and grimeSanitise floors

USAGE

EN

 5. When one side of the cleaning pad gets dirty, just flip the mop and you can quickly start using the other side. (Fig. 12) 6. When the water tank is empty, the appliance will stop producing steam. You can refill the water tank at any time as long as the mop is unplugged from the outlet. This applies to switching the mop heads or the cleaning pad as well. 

IMPORTANT

Please wait 2-3 minutes for the appliance to cool off before switching the mop head or the cleaning pad. Make sure you do not use the mop without attaching a cleaning pad and adding water to the tank first. When you are using the mop for the first time, it might take longer than the normal 30 seconds to start steaming. Never leave the steam mop with a damp/wet microfiber pocket on any floor surface for any amount of time as this may damage the floor. Usage of Carpet Glider 2 in 1 Professional Steam Mop is great for deodorizing and freshening your carpets and rugs.  

NOTE

This appliance does not remove stains from carpets and rugs.

Carpet Glider

1. The carpet glider can be used with the rectangle mop head to lightly steam your carpet and area rugs. Just place the mop head on top of the glider (Fig.13) and move back and forth across a section of the carpet. (Fig.14) EN USAGE Portable Handheld Steamer Direct Steam Nozzle 

Line drawing of a handheld device with a curved handle and blue directional arrows indicating motion (no text or symbols)

CAUTION

This steam cleaner is designed to clean surfaces that will withstand high heat and moisture. Do not use on unsealed wood surfaces (especially wooden antique furniture), painted surfaces. The sheon may be removed by the heat, steam, and friction of the cleaning tools. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend you check the use and care instructions from the surface manufacturer. (Fig. 15) 

CLEANING TIP

The Direct Steam Nozzle creates direct steam spray to clean and sanitise hard to reach nooks & crannies and other places. Use the Direct Steam Nozzle to loosen and dislodge compact dirt often found in corner and tight places where traditional methods and cleaning tools tend to push dirt into

USAGE

EN

 2. First attach the Direct Steam Nozzle by pressing the nozzle onto the Handheld Steamer until it clicks into place. (Fig.16) 3. The Handheld Steamer is automatically set to SCRUB mode. Squeeze the steam trigger to activate steam. To change modes press the ON: STEAM SETTING button to select either DUST, MOP or SCRUB mode. You can change the steam mode while the Handheld Steamer is in standby or in use. Once the selected setting indicator light has turned blue, hold down the steam trigger to start steaming. (Fig. 17) 

Illustration of a hand using an electric shaver with steam rising (no text or symbols)

CAUTION

Do not press the steam trigger until the Direct Steam Nozzle is snapped into the main nozzle of your Handheld Steamer.

CAUTION

Do not press the steam trigger while removing the Direct Steam Nozzle. Avoid touching the tip of the Direct Steam Nozzle, as this will be very hot after steaming.

NOTE

The Handheld Steamer may continue to emit steam EN USAGE Garment Steamer and Bristle  

CLEANING TIP

The Garment Steamer is ideal for removing wrinkles from clothing and freshening and grooming upholstery. A terry bonnet and frame with bristles provides controlled steaming for most types of clothing. (Fig. 18A) A specialised bonnet is ideal for freshening couches and other upholstery, where odors may accumulate. (Fig. 18B) 

CAUTION

Always determine color fastness of any fabric, especially with reds or blues. Take a clean, moist, warm towel and gently rub a small area on the fabric that is as out of sight and out of the way as possible. If color bleeds onto the towel, it is not recommended to use steam cleaner.  1. Select either the garment steamer bonnet or the upholstery bonnet. 2. Snap the bristle frame over the Garment Steamer attachment. We recommend to use this figuration in your clothes in order to make them fresh and remove wrinkles. (Fig. 18A) Snap the Garment Steamer attachment over the bristle frame to freshen and clean your upholstery (Fig. 18B) 3. Attach the assembled Garment Steamer to the Handheld Steamer by snapping it into the main nozzle. (Fig. 19) 4. Select the steam setting and wait until the selected setting indicator light turns solid blue. Press and hold the steam trigger button, and move slowly up and down over your garments or upholstery. (Fig. 20) 5. To remove the Garment Steamer attachment, press and hold down the Handheld Release Buttons. Then slide out the USAGE EN Usage of Hose  1. To use the Accessory Hose, first attach the Accessory Hose to the Handheld Steamer by snapping the Accessory Hose into the main nozzle. (Fig. 21) 2. Select the desired cleaning tool for use. Follow the cleaning tool sub-assembly instructions for the selected tool. 3. To remove the Accessory Hose, press and hold down the Handheld Release Buttons. Then slide out the Accessory Hose using the grip. (Fig. 22) 

CAUTION

Do not press the steam trigger while attaching or removing the Accessory Hose. Do not use the Accessory Hose without cleaning tools attached. 

Technical line drawing of a spray gun with a blue spray bottle and tip, alongside a schematic diagram of the spray gun (no text or symbols present)

Window squeeze

Cleaning Tip: The window squeegee provides a streak free clean. Start at the top and gently glide downward, wiping excess moisture and dirt away. Press fit the window squeegee attachment onto the detail cleaning handle.

EN

USAGE

Flat Scrubber   (Fg. 24) 1. To attach the All-Purpose Scrubber Pad, place the pad exterior side down on a flat surface and insert the top of the Flat Scrubber Tool into the top portion of the pad and then pull the pad over each side of the back edge. 2. Press the Flat Scrubber Tool onto the Accessory Hose until it clicks into place. (Fig. 23) 3. Select either DUST, MOP or SCRUB mode by pressing the ON/STEAM SETTING button and wait until the selected setting indicator light turns solid blue. Hold down the steam trigger to start steaming. (Fig. 24) 4. To remove the Flat Scrubber Tool, press and hold down the Accessory Hose release button. Then slide out the Flat Scrubber Tool. (Fig. 25)  (Fq. 25)  Do not press the steam trigger while attaching or removing the Flat Scrubber Tool! Do not use the Flat Scrubber Tool without the All-Purpose Scrubber Pad attached!  

AFTER USE


After Use and Storage


Line drawing of a robotic arm with a blue highlighted joint, labeled (Fig. 28) at bottom (no text or symbols on the diagram itself)

  Fig. 26 

NOTE

Make sure all attachments are removed before reuniting the Handheld Steamer with the Steam Mop. 1. When you have finished using the Handheld Steamer, reattach it to the mop by first placing the bottom of the Handheld Steamer into the cradle of the mop housing. (Fig. 26) 2. If you have finished mopping, press the ON: STEAM SETTING button until the LED light blinks blue. This stops the unit from steaming. Unplug the cord from the outlet and place the mop into the upright position. Let the unit cool for 3-5 minutes. Remove the cleaning pad by releasing the quick fasteners EN

MAINTENANCE

Keeping your microfiber cleaning pocket as good as new 

Pure technical line drawing of mechanical components without any text, numbers, or symbols

  1. We recommend washing your microfiber pads separately from other fabrics to avoid picking up lint. Only use liquid detergent. (no powder detergent) Don't use any fabric softeners or bleach. 2. If there are loose threads on the pocket carefully cut the thread with scissors. Don't pull on them or cut at the base. (Fig. 31) 

Illustration of a finger being held with a pen, showing motion direction (no text or symbols)

Cleaning the nozzle

1. Your Handheld Steamer should not normally require cleaning, however, should you notice a decrease in the steam output, it may be necessary to remove mineral deposits built up around the nozzles. 2. Unplug the cleaner from the electrical outlet. 3. Use the provided nozzle cleaning tool or a small diameter stiff metal wire and carefully insert the end of the wire into the

TROUBLESHOOTING


Problems	Reasons & Solutions
2 in 1 Professional Steam Mop does not work	· Verify the product is securely plugged into a 220V AC electrical outlet only.· Verify if your in-house sockets, electrical fuse and leakage protection switch are in normal status.· If the appliances still does not work, refer to authorized FAKIR Service.
2 in 1 Professional Steam Mop does not steam	· Verify if there is water inside the water tank. If no, please fill up with water.· Verify if the steam nozzle is jamed.· If there is no steam, refer to authorized FAKIR service.
2 in 1 Professional Steam Mop more water left on floor after use	· Verify if the cleaning cloth is too wet. Please replace with a dry cloth.· Verify if the cleaning cloth is well attached in place on the mop head.· Verify if you use steam mop after it have produced hot steam since turned on for 30-second. Otherwise there will be much moisture because the steam temperature is low.
2 in 1 Professional Steam Mop is hard to push	· Make sure the cleaning cloth is attached correctly.· Check if the cleaning cloth is excessively dirty.· Replace the cloth if it is too dirty or wet.
Floors are cloudy, streaky or spotty after steaming	· The cloth might be dirty. Please replace with a new one.· If you washed the cloth with powder detergent, there may be residual detergent left on the cloth. Wash it again with liquid detergent.· If you are going to clean kitchen area where there might be accumulative grease, 2 in 1 Professional Steam Mop may not be able to clean it up at a time. Please use degreasing agent to clean the floor first.· You might have left the mop in the same spot for too long.· Does the water you used is hard? If yes, please use distilled water.


WASTE DISPOSAL

Waste Disposal  If the service life of the device has ended, in particular if functional disturbances occur, make the worn-out device unusable by cutting through the power cable. Dispose of the device according to the environmental regulations applicable in your country. Electrical waste must not be disposed of together with household waste. Bring the worn-out device to a collection center. The packaging of the device consists of recycling-capable materials. Place these, sorted out according to material, in the collectors provided, so that recycling can be carried out on them. For advice on recycling, refer to your local authority or your dealer This appliance fulfills the requirements of the 2002/96/EC WEEE regulations. Dispatch Carry the appliance in the original package or a similar, well- padded package to prevent damage to the appliance. This product is produced by Xiaotian (Zhongshan) Industrial Co., Ltd. Xiaolan Park, Xiaolan Town, Zhongshan City Guangdong - China on behalf of Fakir Elektrikli Ev Aletleri Dış Ticaret A.Ş. Before you start cleaning with Fakir 2 In 1 Professional Steam Mop Steam Cleaner 

Exterior view of a modern electric vacuum cleaner with attached control panel (no text or symbols visible)

NOTE NOTE [Figure]