Metz Maxi II Strip - Range hood Thermex - Free user manual and instructions
Find the device manual for free Metz Maxi II Strip Thermex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Thermex |
| Model | Metz Maxi II Strip |
| Mounting Type | Wall-mounted canopy |
| Width | 90 cm |
| Depth | 50 cm |
| Height (without chimney) | 65 cm |
| Weight | 12 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 240 W |
| Max Airflow | 650 m³/h |
| Extraction Type | Ducted or recirculating (with carbon filter) |
| Number of Fan Speeds | 3 |
| Lighting | LED strip, 2 x 2 W |
| Controls | Push buttons |
| Noise Level (max speed) | 62 dB(A) |
| Filter Type | Aluminum grease filter, washable |
| Carbon Filter | Optional for recirculation mode |
| Maintenance | Clean grease filter monthly; replace carbon filter every 3-6 months |
| Safety Features | Auto shut-off timer, thermal protection |
| Spare Parts Availability | Filters, bulbs, motor available through service centers |
| Warranty | 2 years |
| Certifications | CE, RoHS |
Frequently Asked Questions - Metz Maxi II Strip Thermex
How do I install the range hood correctly?
Ensure the hood is mounted at least 65 cm above the cooking surface for electric hobs, and 75 cm for gas. Use the included template and wall anchors. For ducted mode, connect to a suitable outlet.
How often should I clean the grease filter?
For optimal performance, clean the aluminum grease filter every month. You can wash it by hand or in the dishwasher. Allow it to dry completely before reinstalling.
How do I replace the carbon filter?
If using recirculation mode, replace the carbon filter every 3-6 months. Remove the grease filter, slide out the old carbon filter, insert a new one (Thermex type), and reattach the grease filter.
Why is my range hood noisy?
Noise can be due to a dirty filter, loose installation, or blocked duct. First, clean the grease filter. Check that the hood is securely mounted. For ducted installations, ensure the duct is not kinked.
Can I use the hood without a duct?
Yes, the Metz Maxi II Strip can be used in recirculation mode. You must install a carbon filter (sold separately) to remove odors and vapors before recirculating air back into the kitchen.
What type of lighting does the hood use?
It uses integrated LED strips (2 x 2 W). These are energy-efficient and long-lasting. If a strip fails, contact Thermex service for replacement.
How do I reset the filter cleaning indicator?
After cleaning or replacing filters, press and hold the timer button for about 5 seconds until the indicator light turns off. Refer to the manual for exact steps.
What are the dimensions for the cut-out if installing in a cabinet?
This model is designed for wall mounting, not for built-in installation. The overall dimensions are 90 cm (W) x 50 cm (D) x 65 cm (H) without chimney.
How do I control the fan speed?
Use the push buttons on the front panel. There are three speeds: low, medium, and high. Press the speed button to cycle through options.
Where can I find spare parts like filters or bulbs?
Spare parts are available from Thermex authorized service centers or online retailers. Use the model name Metz Maxi II Strip to order correct parts.
User questions about Metz Maxi II Strip Thermex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual Metz Maxi II Strip - Thermex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Metz Maxi II Strip by Thermex.