Airgrip - Range hood Thermex - Free user manual and instructions
Find the device manual for free Airgrip Thermex in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Thermex |
| Model | Airgrip |
| Width | 60 cm |
| Depth | 50 cm |
| Height (min-max) | 10-15 cm |
| Net Weight | 12 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Motor Power | 200 W |
| Lighting Power | 2 x 3 W LED |
| Extraction Capacity (max) | 650 m³/h |
| Number of Speeds | 3 + Boost |
| Filter Type | Aluminum Grease Filter + Charcoal Filter (optional) |
| Ducting Diameter | 150 mm |
| Noise Level (max) | 55 dB(A) |
| Control Type | Electronic touch buttons |
| Installation Type | Built-in / Under-cabinet |
| Grease Filter Cleaning | Washable in dishwasher or by hand |
| Charcoal Filter Replacement | Every 3-6 months |
| Energy Class | A+ |
| Safety Features | Thermal cut-off, auto shut-off (optional) |
| Spare Parts Available | Filters, LED bulbs, motor |
| Warranty | 2 years |
Frequently Asked Questions - Airgrip Thermex
How do I install the Thermex Airgrip range hood?
Installation should be done by a qualified technician. Ensure the hood is mounted at least 65 cm above gas cooktop or 55 cm above electric cooktop. Connect the ducting to a 150 mm exhaust pipe or use recirculation with charcoal filters.
How do I clean the grease filters?
The aluminum grease filters can be cleaned in a dishwasher at low temperature or by hand with warm soapy water. Allow them to dry completely before reinstalling.
How often should I replace the charcoal filter?
Charcoal filters should be replaced every 3 to 6 months depending on usage. They cannot be washed and must be replaced to maintain performance.
What does the boost function do?
The boost function activates maximum extraction power for a short period (e.g., 10 minutes) to quickly remove strong odors or smoke, then returns to the previous speed.
Can I use the hood without ducting?
Yes, the Airgrip can be used in recirculation mode with charcoal filters. Ensure the charcoal filters are installed and the ducting is capped or directed back into the room.
How do I replace the LED bulbs?
Turn off power to the hood. Gently remove the old LED bulb by twisting counterclockwise and replace with a new 3W LED bulb of the same type. Reattach the cover.
What should I do if the hood is noisy?
Check if the ducting is blocked or if the filters need cleaning. Ensure the hood is securely mounted. If noise persists, contact customer service for motor inspection.
How do I reset the filter alarm?
After cleaning or replacing filters, press and hold the filter reset button for 3 seconds until the indicator light turns off. Refer to the manual for exact button location.
What is the recommended distance between the hood and hob?
For gas cooktops, minimum 65 cm; for electric or induction cooktops, minimum 55 cm. This ensures optimal extraction and safety.
Where can I find spare parts?
Spare parts such as filters and bulbs can be purchased from authorized Thermex dealers or online through the official website. Always use genuine parts.
User questions about Airgrip Thermex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual Airgrip - Thermex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Airgrip by Thermex.