Asocino XL2004E - Milk frother KRUPS - Free user manual and instructions

Product Type	Milk Frother
Brand	Krups
Model	Asocino XL2004E
Functions	Cappuccino, Caffè Latte, Hot Milk
Capacity (Cappuccino)	150 ml (max milk)
Capacity (Caffè Latte)	225 ml (max milk)
Capacity (Hot Milk)	300 ml (max milk)
Power Supply	220-240 V, 50-60 Hz
Materials	Aluminium jug with non-stick coating, brushed stainless steel trim, stainless steel and soft-touch plastic base
Safety Features	Automatic shut-off when cycle complete; overheat protection (flashing button)
Cleaning	Hand wash only; do not immerse base or cord; removable emulsifier
Dishwasher Safe	No
Accessories	Transparent anti-spill lid, removable emulsifier, 360° rotating base, power cord storage
Special Features	One-touch recipe buttons, automatic temperature control, non-stick coating for easy cleaning
Warranty	Limited manufacturer warranty (details in manual)
Intended Use	Domestic use only; not for commercial or other liquids

Frequently Asked Questions - Asocino XL2004E KRUPS

How do I make a cappuccino with the Asocino XL2004E?

Ensure the emulsifier is fitted. Pour cold milk up to the 150 ml mark inside the jug. Press the Cappuccino button. The appliance will heat and froth milk automatically, producing about 50% milk and 50% froth. When the button light turns off, serve into a cup and add espresso.

What types of milk can I use?

You can use pasteurised (fresh) or UHT milk, skimmed, semi-skimmed, or whole milk, either refrigerated or at room temperature. For best froth quality, use very fresh or recently opened milk. Special milks like micro-filtered, unpasteurised, fermented, or enriched may give less satisfactory results.

How do I clean the milk frother?

Unplug the appliance and let it cool. Remove the emulsifier from the jug. Clean the jug with warm water and a few drops of washing-up liquid using a sponge or non-abrasive cleaner. Rinse with clear warm water and dry. Do not immerse the base or cord in water. Do not wash in the dishwasher.

Why won't my appliance start?

If a recipe button flashes, the pot may be too hot. Wait for the light to stop flashing and press the button again. If all buttons flash, the emulsifier may be blocked. Empty the jug, remove and clean the emulsifier. If the problem persists, contact an authorised service centre.

What does it mean when the recipe button flashes?

A single flashing button indicates that the metal jug is too hot to start a new cycle. Wait for it to cool down. If all buttons flash simultaneously, the emulsifier is blocked or the appliance detects an error. Clean the emulsifier and try again.

Can I heat liquids other than milk?

No. This appliance is designed only for heating and frothing milk. Do not use it for soups, sauces, or other liquids, as this may damage the appliance and void the warranty.

How do I descale the milk frother?

The manual does not provide specific descaling instructions. However, regular cleaning with warm soapy water after each use is recommended to prevent milk scale buildup. If needed, you can run a cycle with water and a few drops of vinegar, then rinse thoroughly. Always check the manual for any updates.

What are the maximum milk capacities for each recipe?

Cappuccino: 150 ml. Caffè Latte: 225 ml. Hot Milk: 300 ml. Do not exceed these levels. Also ensure the emulsifier is covered with at least 50 ml of milk for all recipes.

Can I use the appliance continuously for multiple cycles?

Yes, but between cycles, especially for Cappuccino and Caffè Latte, rinse the inside of the jug under cold water to remove milk skin. For Caffè Latte, always use cold milk straight from the fridge for best results.

Is the Asocino XL2004E dishwasher safe?

No. Do not wash any part of the appliance in the dishwasher. The jug, lid, and emulsifier must be hand washed only. The base must never be immersed in water.

USER MANUAL Asocino XL2004E KRUPS

Thank you for choosing the XL 2000 Automatic Milk Frother by Krups and your trust in the brand. You will appreciate how easy it is to use to heat and/or froth milk, and the XL 2000 will soon become the new expert in your kitchen.

SAFETY INSTRUCTIONS

Read the instructions carefully before using for the first time and keep them in a safe place: Krups may not be held responsible for any incorrect use.
The appliance must only be plugged into mains socket with an earth pin. Check that the supply voltage matches that marked on the rating plate of the appliance.
Do not place the appliance on a hot surface such as a hob or use it close to a naked flame.
■ Unplug the appliance immediately if you notice that the appliance is not operating correctly.
- Do not pull on the power cord to unplug it.
- Do not let the power cord dangle from a table or a work top.
- Do not leave your hand on the power cord or the hot parts of the appliance.
- Do not immerse the appliance, the power cord or plug in water or any other liquid.
- Do not wash the appliance in the dish washer.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety
Children should be supervised to ensure that they do not play with the appliance.
If the power cord, the plug or the appliance do not operate correctly or if they are damaged, do not use the appliance so as to avoid any danger, and have the appliance repaired by an KRUPS approved service centre.
■ Unplug the appliance as soon as you have finished using it, when it is not be used for some time and when you clean it.
■ Except for cleaning and descaling, following the instructions for use of the appliance, all other work on the appliance must be carried out by an KRUPS approved service centre.
■ Any incorrect connection invalidates the guarantee.
The use of adapters and/or extensions is not recommended.
- Your guarantee does not apply if the appliance is not cleaned or maintained regularly or if there is a foreign body in it (see separate document).
■ Protect the appliance from damp and frost.
All of our appliances are subject to quality control checks. Operating tests are carried out on the appliances at random, which is why some may have traces of use.
Note that the body of stainless steel Automatic Milk Frother becomes hot during operation. During use, do not touch the metal jug as this will become hot.
This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
- Your appliance must only be used with its own base.
■ Never immerse the appliance or its base in water. The electrical connections must not come into contact with water.

DESCRIPTION OF THE APPLIANCE

1 Transparent anti-spill lid
2 Multi-directional pouring rim
3 Aluminium jug with non-stick coating (easy to clean) and brushed stainless steel trim
4 Base with 360 rotation

5 Stainless steel coated with soft touch satin finish plastic
6 3 preparation control panel: one button for each recipe
7 Removable emulsifier
8 Graduation for the hot milk recipe (max. volume of milk)

9 Graduation for the Caffe Latte recipe (max. volume of milk)
10 Graduation for the Cappuccino recipe (max. volume of milk)
11 Power cord storage under the base

INSTRUCTIONS FOR USING THE APPLIANCE

3 steps for optimum results

1. Pour the milk A1 - 2. Select your recipe A2 - 3. Serve A3

CLEANING: DO NOT CLEAN THE APPLIANCE IN A DISHWASHER

The non-stick coating on the inside of the pot means that you can clean it easily. Here's how to go about it:

Remove the appliance from its electrical power base.

1. Remove the emulsifier from the jug B1
2. Clean the jug using warm water and washing-up liquid with a sponge or a non-abrasive cleaner B2
3. Rinse the jug with clear, warm water B3
4. Dry the appliance.

Remember to fit the emulsifier again, ensuring that it is clipped into place (clicks into position).

Clean your product regularly to keep it in optimum condition, as described below:

1. Fill your appliance to the maximum milk level with water containing a few drops of washing up liquid
2. Press the «hot milk» button
3. Rinse and wipe the container clean at the end of the cycle.

IF USING FOR SUCCESSIVE CYCLES

1. Cappuccino Function: For reasons of efficiency (temperature and quality of froth) and hygiene, if you want to heat quantities of milk several times in a row, we advise that you rinse the inside of the pot under cold water, in order to prevent the formation of a skin of milk in the bottom of the jug.
2. Caffe Latte Function: In order to ensure that this recipe works well, take care to clean the inside of the pot between each use in order to remove the skin of milk which forms there, and use cold milk straight out of the fridge.

THE VARIOUS PREPARATIONS

This appliance allows milk to be heated and/or frothed in three different ways to obtain different froths and temperatures. You can use pasteurised (fresh) milk or UHT, skimmed, semi-skimmed or whole milk, either from the refrigerator or at room temperature. The use of special milks such as micro filtered (which has more bacteria filtered out than pasteurised), unpasteurised, fermented (such as buttermilk) and enriched, may give less satisfactory results especially in terms of the quality of the froth.

However we recommend that you use very fresh milk or that has only been opened recently. For each preparation, the maximum amount of milk is indicated by a raised line inside the jug and the minimum level is when the liquid covers the emulsifier.

Cappuccino

50% hot milk

50% frothed milk

Min. temperature: 70°C

Max. quantity of milk: 150 ml

Preparation : Check that the emulsifier is fitted.

1 Pour in the milk but do not fill above the maximum level (150 ml), but ensure that the emulsifier is covered by using a minimum amount of (50 ml).
2 Press the 📄 button. The button will light up and the appliance will start operating automatically.
■ The motor starts intermittently and then operates at low speed.
■ When the preparation reaches the ideal temperature, the motor accelerates to froth the milk.
■ When the button light switches off: your preparation is ready to be served at the ideal temperature and mixture made from an approximate proportion of 50% milk and 50% froth.
3 Serve the frothed milk into a cup then add your espresso or coffee to the preparation.

Caffe Latte

80% hot milk

20% frothed milk

Min. temperature: 70°C

Max. quantity of milk: 225 ml

Preparation : Check that the emulsifier is fitted.

1 Pour in the milk but do not fill above the maximum level (225 ml), but ensure that the emulsifier is covered by using a minimum amount of (50 ml).
2 Press the 📋 button. The button will light up and the appliance will start operating automatically.
■ The motor starts intermittently and then operates at low speed.
■ When the preparation reaches the ideal temperature, the motor accelerates.
■ When the button light switches off: your preparation is ready to be served at the ideal temperature and a proportion of milk and frothed milk of around 80/20.
3 Serve the frothed milk into a cup then add your espresso or coffee to the preparation.

Hot milk

90% hot milk

Min. temperature: 80°C

Max. quantity of milk: 300 ml

Preparation : Check that the emulsifier is fitted.

1 Pour in the milk but do not fill above the maximum level (300 ml), but ensure that the emulsifier is covered by using a minimum amount of (50 ml).
2 Press the 🔒 button. The button will light up and the appliance will start operating automatically.
■ The motor starts intermittently and then its speed automatically adapts to the volume of milk to be heated.
- When the button light switches off: your preparation is ready to be served at the ideal temperature (hotter than the Cappuccino and the Café Latte preparations – around 10°C more). The result obtained generally has a proportion of froth of less than 10%.
3 Serve the hot milk into a suitable cup.

PROBLEMS AND CORRECTIVE ACTIONS

Possible problems Probable causes	Corrective actions
The appliance will not start, the recipe button flashes	The temperature of the pot is too high	Wait for the light to stop flashing and press the button of the desired recipe again
The appliance will not start, all of the recipe buttons flash	The emulsifier is blocked	Empty the preparation, remove the emulsifier and clean your jug and emulsifier.

If the problem continues, please contact the service centre in your country.

GUARANTEE

This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.

If you have any questions, please contact the customer service of your country. It is preferable to have the appliance close to hand when calling, as well as the serial number marked on the bottom of the appliance.

If you have any problem problems or queries, please contact our Customer Relations Team first for expert help and advice: 0845 602 1454 - UK

[phone] - Ireland

or consult our website - www.krups.co.uk

LIMITS OF USE

This appliance is for heating and frothing milk. It is not designed to heat other liquids or preparations (soups, sauces etc.).

The manufacturer cannot be held responsible for any damage arising from the appliance being used for other purposes, incorrect connection, handling, operations and repairs. The maintenance guarantees will be void in such circumstance

This appliance is intended to be used only in the household. It is not intended to be used in the following applications, and the guarantee will not apply for:

• staff kitchen areas in shops, offices and other working environments
• farm houses
• by clients in hotels, motels and other residential type environnements
  • bed and breakfast type environments.

DISPOSING OF ELECTRICAL OR ELECTRONIC APPLIANCES

Help protect the environment!

Your appliance contains many materials that may be recycled or recovered.

Take it to a local civic waste collection centre to be processed.

PROBLEMY I DZIAŁANIA NAPRAWCZE