SILVERCREST SMZ 260 B1 - Food processor

SMZ 260 B1 - Food processor SILVERCREST - Free user manual and instructions

Find the device manual for free SMZ 260 B1 SILVERCREST in PDF.

📄 57 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SILVERCREST SMZ 260 B1 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Mini Chopper (Food Processor)
Brand SilverCrest
Model SMZ 260 B1
Voltage 220–240 V, 50 Hz
Power Consumption 260 W
Bowl Capacity 500 ml
Max Food Capacity (solid) 350 ml
Max Liquid Capacity 200 ml
Continuous Operation Time 1 minute (then cool down)
Protection Class II (double insulated)
Blade Material Stainless steel
Included Accessories Blade holder with blade, whisk attachment
Turbo Function Yes (via Turbo button)
Pulsed Operation Yes (short presses)
Dishwasher Safe Parts Bowl, lid, whisk, blade holder, base (not motor block)
Motor Block Cleaning Wipe with damp cloth; do not immerse
Safety Features Blade lock, lid must be locked, motor block must be pressed to operate
Warranty 3 years

Frequently Asked Questions - SMZ 260 B1 SILVERCREST

What can I chop with the SilverCrest SMZ 260 B1?
You can chop boneless foods like onions, garlic, carrots, nuts, dried fruit, hard-boiled eggs, ice cubes, and cheese. Refer to the chopping table in the manual for recommended quantities and times.
How do I use the turbo function?
Press the motor block down to start normal speed, then also press the Turbo button (labeled ①) and hold it for higher speed. Release both to stop.
Can I whip cream with this mini chopper?
Yes, using the included whisk attachment. For 100 ml cream, use the whisk on both blades; for 200 ml, turn it 180° to engage one blade. Whip at normal speed for 30–50 seconds with chilled cream.
How long should I run the appliance continuously?
Do not run for more than 1 minute at a time. Allow the motor to cool down completely before next use to avoid overheating.
What should I do if the motor gets blocked?
Cut hard foods (like nuts) into smaller pieces (approx 2 cm) before processing. Use pulsed turbo to avoid blocking. If blocked, unplug, remove lid, and shake bowl.
How do I clean the motor block?
Do not immerse the motor block in water or put it in the dishwasher. Clean it with a damp sponge and dry thoroughly. Other parts (bowl, lid, whisk, base) are dishwasher safe.
Why doesn't the appliance start?
Check that the power socket is working, the fuse is intact, and the lid is properly locked. Also ensure the motor block is pressed down firmly. If still not working, contact service.
Is the blade very sharp?
Yes, the blade is extremely sharp. Always handle with caution, keep out of reach of children, and store the device reassembled to avoid contact with the blade.
Can I process hot liquids?
No, the appliance is designed for cold or room temperature foods. Do not process hot liquids as they may cause injury or damage.
What is the warranty period and how to claim?
The warranty is 3 years from purchase. Keep your receipt. For claims, contact the service department by phone (UK: 0871 5000 720, Ireland: 1890 930 034) or email. Post-free return is assured.

User questions about SMZ 260 B1 SILVERCREST

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Food processor in PDF format for free! Find your manual SMZ 260 B1 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SMZ 260 B1 by SILVERCREST.

USER MANUAL SMZ 260 B1 SILVERCREST

GB Mini Chopper Operating instructions
HU Univerzális aprító Használati utasítás
© Univerzální drtič Návod k obsluze
DE Multizerkleinerer AT Bedienungsanleitung CH

SILVERCREST SMZ 260 B1 - 1

SILVERCREST SMZ 260 B1 - 2

CONTENT PAGE

Intended Use 2

Safety Instructions 2

Technical Data 3

Items supplied 3

Description of the appliance 3

Chopping 4

Beating cream 5

Cleaning 6

Troubleshooting 6

Disposal 7

Importer 7

Warranty and Service 7

Read the operating instructions carefully before using the device for the first time and preserve this booklet for later reference. Pass this manual on to whoever might acquire the device at a future date.

Mini Chopper

Intended Use

This Multi Purpose Chopper is intended exclusively for the processing of small quantities of boneless foodstuffs or for the whipping of cream.

This universal food processor is also designed exclusively for use in private households. This also includes observance of all information in these operating instructions, particularly the safety instructions. All other uses are deemed to be improper and can result in property damage or even in personal injury. We shall not accept liability for damages caused due to improper use of the appliance.

Safety Instructions

SILVERCREST SMZ 260 B1 - Safety Instructions - 1

Risk of electric shock!

  • Connect the universal food processor only to properly installed power sockets with a mains voltage of 220 240 V and 50 Hz.
  • To avoid potentially fatal risks, arrange for a defective power plug and/or cable to be replaced at once by qualified technicians or our Customer Service Department.
  • Unplug the universal food processor from the socket if you notice any faulty operation and when you decide to clean it.
  • Always remove the power cable from the socket by pulling on the plug, do not pull on the cable itself.
  • Do not crease or crimp the power cable and place the power cable in such a way to prevent anyone from stepping or tripping over it.

SILVERCREST SMZ 260 B1 - Risk of electric shock! - 1

Do not submerse the motor block of the universal food processor in liquids at any time and do not permit liquids to penetrate into the housing of the motor block.

  • NEVER subject the appliance to moisture and do not use it outdoors. If by chance liquids do enter into the housing, unplug the appliance from the power socket immediately and have it repaired by a qualified technician.
  • Never grasp the universal food processor, the power cable or the plug with wet hands.
  • Should the power cable or motor block become damaged, arrange for the universal food processor to be repaired by a qualified specialist before using it again. Do not open the motor block housing of the universal food processor. Should you do so, appliance safety can no longer be assured and the warranty becomes void.
  • Separate your universal food processor from the mains supply immediately after use. The appliance is completely free of electrical power only when you unplug it.

SILVERCREST SMZ 260 B1 - Risk of electric shock! - 2

Risk of personal injury!

  • This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiencies in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Handle the extremely sharp blade with caution, it can cause injuries. Reassemble the universal food processor after using and cleaning it so that you do not injure yourself with the blade. Keep the blade out of the reach of children.

  • Never attempt to remove foodstuffs from the vessel as long as the blade is still running. Risk of serious injury!

  • Before removing the motor block, wait until the knife has stopped rotating. NEVER try to grasp the still rotating knife blade! Risk of serious injury!

SILVERCREST SMZ 260 B1 - Risk of personal injury! - 1

Risk of fire!

- Do not run the universal food processor for more than 1 minute at a time. After this period allow it to cool down.

SILVERCREST SMZ 260 B1 - Risk of fire! - 1

Attention!

  • Pay heed to the table of filling quantities in the chapter "Chopping". If you do not, there is a risk of soiling due to content being squeezed out.
  • Do NOT clean the motor block in the dish washer, doing so would damage it.

Technical Data

Mains voltage: 220 240 V \~, 50 Hz

Nominal power: 260 W

CO Time: 1 Minute

Protection class: II /

Capacity blender jug: 500 ml

Max. capacity:

Foodstuffs: up to the 350 ml marking

Liquids: 200 ml

CO Time

The C.O. Time (Continuous Operation) details how long an appliance may be used without the motor overheating and being damaged. After the appliance has run for for this period it must be switched off until the motor has cooled itself down.

Items supplied

Mini Chopper

Blade holder with blade

Whisk attachment

Operating instructions

Description of the appliance

Illustration A:

① Turbo button
② Motor block
③ Lid collar
4 Lid
⑤ Blade holder
6 Bowl
7 Knife
8 Mounting
⑨ Appliance base
⑩ Whisk attachment

Chopping

© Note

Before using the appliance for the first time, clean it thoroughly as per the instructions given in the chapter "Cleaning".

→ Place the bowl ⑥ in the appliance base ⑨.
→ Place the blade holder ⑤ with the knife ⑦ on the mounting ⑧.
→Prepare the items to be processed by cutting large pieces to a size that will fit in the bowl ⑥.
→ Place the food to be processed in the bowl 6. Thereby, take note of the following table:

FoodstuffFilling quantityProcessing timeSPEED
Salami 130 g 3 x 5secs. Turbo
Cheese (Gouda, young, refrigerator temperature)100 g4 x 15 secs. Turbo
Onions Garlic100 gpulsating Turbo
Carrots 100 g 3 x 5secs. Normal
Dried fruit 130 g 4 x15 secs. Turbo
Almonds 50 gcoarse: 1 x 10 secs. middle: 2 x 10 secs. fine: 3 x 10 secs.Turbo
Eggs (hard boiled)150 g2 x 4 secs. Turbo
Walnuts 50g 2 x 8secs. Turbo
Ice cubes 100 gpulsating Turbo

→ Close the bowl ⑥ with the lid ④: Place it on the bowl ⑥ so that the lugs on the lid ④ engage in the slots on the bowl ⑥. Then turn the lid ④ so that the lugs slide unter the slots and the lid ④ locks into place.
→ Place the motor block ② on the lid collar ③.
→Press the motor block ② downwards, as shown in Figure B. The motor starts with the normal operating speed.
To make use of the higher processing speed "Turbo", press, in addition to the motor block ②, the turbo button ① and keep it pressed down, as shown in Figure C.

Note

Should larger pieces of the contents collect on the wall of the bowl while processing, lift the motor block ② from the lid collar ③. Shake the bowl ⑥ vigorously and then continue with the processing. Before the processing, particularly hard foods must be cut into smaller pieces (about 2cm). Otherwise, the motor could block. With hard foodstuffs select a pulsating processing. For this, press the turbo button ① repeatedly for a short time (in addition to the motor block ②). Should the foodstuff not be completely pulverised, you can either cut it into smaller pieces or lift the motor block ② from the lid collar ③. Shake the bowl ⑥ vigorously and then continue with the processing.

When the contents have been sufficiently chopped, release the motor block ② and, if necessary, the turbo button ①.
→Unplug the power cable from the socket.

⚠️ Risk of personal injury!

Never attempt to remove food from the bowl 6 when the blade 7 is still in motion. Contents could shoot out and make a mess.

→ Wait until the blade ⑦ has stopped rotating.
→ Lift the motor block ② from the lid collar ③.
Remove the lid 4.

⚠️ Risk of personal injury!

To avoid injuries, exercise caution when handling the extremely sharp blade ⑦. Keep the blade ⑦ out of the reach of children.

→ Carefully pull the blade holder ⑤ with the knife ⑦ out of the bowl ⑥.
→Remove the contents.

© Note

Due to the grinding of hard and abrasive foodstuffs, the bowl ⑥ can take on a dull appearance over time. This is normal and does not influence the functioning of the appliance.

i Tip

After you have finished processing the foodstuffs, you can use the appliance base ⑨ as a cover for the bowl ⑥, this will help to keep the foodstuff fresh for longer.

→ Remove the motor block ② and the lid ④ from the bowl ⑥.

The blade retainer ⑤ with the blade ⑦ can, if you wish, remain in the bowl ⑥.

→Loosen the appliance base ⑨ from the underside of the bowl ⑥. You can now place appliance base ⑨ on the bowl ⑥ so that it seals the bowl ⑥.

Beating cream

Using the whisk attachment ⑩, you can also whip cream with this appliance:

→ Place the bowl ⑥ in the appliance base ⑨.
Place the blade holder ⑤ with the knife ⑦ on the mounting ⑧.
→ Push the whisk attachment 10 onto the blade holder 5:

For 100ml of cream, place it on the blade holder so that the whisk attachment ⑩ rests on the two blades and engages.

For 200ml of cream, turn the whisk attachment vertically through 180°, so that it rests on only one blade and engages. It then ploughs higher through the cream:

Simple line drawing of a mechanical component with a rotating arrow (no text or symbols)

Technical line drawing of a mechanical component with a cylindrical shaft and base (no text or symbols)

Technical line drawing of a mechanical component with no visible text or symbols

→Pour the cream in.
→ Close the bowl ⑥ with the lid ④: Place it on the bowl ⑥ so that the lugs on the lid ④ engage in the slots on the bowl ⑥. Then turn the lid ④ so that the lugs slide unter the slots and the lid ④ locks into place.
Place the motor block ② on the lid collar ③.
→Press the motor block ② downwards, as shown in Figure B. The motor starts with the normal operating speed.

i Note

To whip cream optimally, it should be well chilled before being whipped (max 8° C / refrigerator temperature).

For 100ml of cream we recommend a whipping time of 30 seconds at normal speed.

For 200 ml of cream we recommend a whipping time of 30–50 seconds at normal speed.

Due to various factors, for example the fat content of the cream or the outdoor temperature, the whipping time can however vary! Observe the cream whilst whipping it and adjust the processing time to your requirements.

Cleaning

Risk of electric shock!

Always remove the plug from the power socket before cleaning the universal food processor.

Under no circumstances may the appliance be immersed in water or held under running water during cleaning.

⚠️ Risk of personal injury!

To avoid injuries, exercise caution when handling the extremely sharp blade ⑦. Reassemble the universal food processor after using and cleaning it so that you do not injure yourself on the exposed blade

  1. Keep the blade ⑦ out of the reach of children.

Attention!

Do not clean the motor block ② in the dish washer as doing so would damage it.

→Unplug the power cable from the socket.
→Clean the motor block ② and the blade holder ⑤ with the blade ⑦ by using a well pressed out sponge.
→ Clean the bowl ⑥, the whisk attachment ⑩, the lid ④ and the appliance base ⑨ under running water and use a tea towel to dry them well.
Alternatively, you can wash all components, EXCEPT the motor block ②, in the dish washer.

Troubleshooting

Symptom:

The Universal Food Processor will not switch itself on.

Possible cause and remedy:

A domestic electrical fuse is defect.

Check the fuses and replace them if necessary.

The power socket is defective. Try another power socket.

The universal food processor is possibly defective.

Check the power cable and the power plug for damages. Arrange for the Universal Food Processor to be checked by specialists.

SILVERCREST SMZ 260 B1 - Possible cause and remedy: - 1

Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC.

Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.

SILVERCREST SMZ 260 B1 - Possible cause and remedy: - 2

Dispose of all packaging materials in an environmentally friendly manner.

Importer

KOMPERNASS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

Warranty and Service

The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post free despatch for your goods be assured.

The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e.g. buttons or batteries. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty.

The warranty period will not be extended by repairs made under warranty. This applies also to replaced and repaired parts. Any damage and defects extant on purchase must be reported immediately after un packing the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment.

SILVERCREST SMZ 260 B1 - Warranty and Service - 1

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E Mail: kompernass@lidl.co.uk

IAN 69293

SILVERCREST SMZ 260 B1 - Service Great Britain - 1

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E Mail: kompernass@lidl.ie

IAN 69293

SPIS TREŚCI STRONA

Przeznaczenie 10

Technical line drawing of a mechanical component with a cylindrical shaft and base (no text or symbols)

Technical line drawing of a mechanical component with no visible text or symbols

Technical line drawing of a mechanical component with a cylindrical shaft and base (no text or symbols)

Line drawing of a mechanical component resembling a mixing bowl or fan (no text or symbols)

Technical line drawing of a mechanical component with a cylindrical shaft and base (no text or symbols)

Line drawing of a kitchen mixer with a central shaft and side blades (no text or symbols)

→Dolijte smetano.
→ Posodo ⑥ zaprite s pokrovom ④: tega na poso do ⑥ namestite tako, da nastavki na pokrovu ④ segajo v utore na posodi ⑥. Potem pokrov ④ obrnite tako, da nastavki v utorih zdrsijo navzdol in se pokrov ④ zaskoči.
→ Motorni blok ② namestite na vezni element po krova ③.
→ Motorni blok ② potisnite navzdol, kot je prika zano na sliki B. Motor se zažene z normalno hitrostjo obdelave.

i Napotek

Technical line drawing of a mechanical assembly with a cylindrical component and base mount (no text or symbols)

Technical line drawing of a mechanical component with no visible text or symbols

Technical line drawing of a mechanical component with a cylindrical shaft and base (no text or symbols)

Technical line drawing of a mechanical component with no visible text or symbols

Technical line drawing of a mechanical component with a cylindrical shaft and base (no text or symbols)

Technical line drawing of a mechanical component with no visible text or symbols

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SILVERCREST

Model : SMZ 260 B1

Category : Food processor