SMZC 500 A1 - Food processor SILVERCREST - Free user manual and instructions

Product type	Food processor (chopper)
Brand	SilverCrest
Model	SMZC 500 A1
Dimensions (H x Ø)	Approx. 24 cm x 17 cm
Weight (including accessories)	Approx. 1,766 g
Power supply	220-240 V, 50/60 Hz, 500 W max
Speeds	2 speeds (I and II)
Capacity of glass bowl	1000 mL (max fill level 500 mL)
Main functions	Chop, mix, grind, crush ice, whip cream
Included accessories	Blades, emulsifier disc, lid with sealing ring, anti-slip ring
Temporary operating time (blades)	30 seconds
Temporary operating time (emulsifier disc)	2 minutes
Power cord length	Approx. 100 cm
Protection class	II
Care and cleaning	Motor unit: dry or damp cloth. Other parts: dishwasher safe.
Safety	Do not immerse motor unit. Blades are very sharp. Do not use hot or boiling food. Observe temporary operating times.
Spare parts and repairability	Blades, emulsifier disc, lid, glass bowl, anti-slip ring available. Repairs by authorized technical service.
Warranty	3 years from date of purchase

Frequently Asked Questions - SMZC 500 A1 SILVERCREST

What foods can I chop with the SMZC 500 A1 food processor?

You can chop meat, fish, vegetables, herbs, nuts, ice cubes, and frozen berries. Do not chop hot foods, bones, coffee beans, or nutmeg.

How to use the emulsifier disc?

The emulsifier disc is for whipping cream. Place it on the guide shaft, fill the bowl with at least 200 mL of cold cream, then use speed I for a maximum of 40 seconds.

What is the maximum capacity of the bowl?

The glass bowl has a capacity of 1000 mL, but the maximum fill level is 500 mL (MAX mark). Do not exceed this limit.

Can I wash the parts in the dishwasher?

Yes, the lid, glass bowl, blades, and emulsifier disc are dishwasher safe. The motor unit and anti-slip ring should be cleaned with a damp cloth.

What to do if the blades do not turn?

Check that the motor unit is properly locked onto the lid. If the food is too hard, remove pieces or add a little liquid. Observe the temporary operating time.

How long can I use the appliance continuously?

With blades: maximum 30 seconds. With emulsifier disc: maximum 2 minutes. Then allow the motor to cool to room temperature before using again.

Can I chop hot foods?

No, never put hot or boiling foods in the bowl. Let them cool first to avoid damaging the motor or cracking the glass.

Are the blades removable?

Yes, the blades can be removed from the guide shaft after use. Caution, they are very sharp: handle with care when cleaning.

Which speed to use for chopping onions?

For coarsely chopped onions, use speed I in 1-second bursts. For fine chopping, use speed II in bursts, taking breaks.

Where can I find spare parts?

Contact the technical service at the contact details provided in the manual (phone or email). Spare parts (blades, disc, lid, bowl) are available.

USER MANUAL SMZC 500 A1 SILVERCREST

Black-and-white photo of a SilverCrest blender with a side view of fresh tomatoes and a website URL (no text on the blender itself)

Multizerkleinerer SMZC 500 A1

TARGA GMBH

Covlarwing 45

59494 SOEST DEUTSCHLAND / GERMANY

User manual and service information

IAN 274361

IAN 274361

DC AT CN

Deutsch......2

Français....21

Italiano....41

English 59

Inhalt

Einleitung 3

Two technical diagrams showing a mechanical component with a base and top, each with a downward arrow indicating a force or adjustment (no text or symbols present)

Two mechanical components with arrows indicating downward force or compression, mounted on a base (no text or symbols present)

Symbol of a trash bin with crossed lines indicating no waste, and a solid black rectangle below (no text or labels)

Cher client, chère cliente,

Two technical diagrams showing a mechanical component with a base and top, each with a downward arrow indicating a force or adjustment (no text or symbols present)

Symbol of a trash bin with crossed lines indicating no waste, and a solid black rectangle below (no text or labels)

Introduction......60

Intended use....60

Predictable misuse....60

Package contents 61

Controls....61

Technical specifications 62

Safety instructions 62

Before you start 68

Getting started 68

Use 68

Preparing food....68

Setting up and filling the Mini Chopper....68

Switching on / selecting speed 69

Recommended speeds....70

Removing the chopped food / whipped cream....71

After use....71

Maintenance / cleaning....71

Storing the Mini Chopper 72

Troubleshooting 73

Environmental regulations and disposal information 73

Conformity 74

Warranty Information....74

Introduction

Thank you for buying a SilverCrest product.

Intended use

The SMZC 500 A1 Mini Chopper, hereinafter the Mini Chopper, can be used for chopping, mixing and crushing food and ice cubes and for whipping cream.

This Mini Chopper is not intended for commercial use.

This Mini Chopper is suitable exclusively for use indoors, in dry, sealed spaces.

Make sure that the Mini Chopper is always positioned securely.

The Mini Chopper fulfils all relevant norms and standards associated with CE Conformity. Any modifications to the appliance other than recommended changes by the manufacturer may result in these standards no longer being met.

Predictable misuse

• The Mini Chopper may not be used for crushing or chopping hot or boiling foods.
• The Mini Chopper may not be used to crush bones, frozen food (with the exception of ice cubes and frozen berries), coffee beans, grains or nutmeg.
  • Non-food substances should also not be processed.

Package contents

• Motor unit with power cable and plug
- Glass container
• Lid for glass container with sealing ring
- Cutting blades
- Emulsifying disc
- Plastic non-slip ring
- This user manual

Controls

These operating instructions have a fold-out cover. On the inside of the cover, the Mini Chopper is depicted with a numbered key. The meanings of the numbers are as follows:

1 Buttons for speed I / II
2 Motor unit
3 Lid
4 Power cable and plug
5 Cutting blades
6 Emulsifying disc
7 Glass bowl with 1,000 ml capacity and max. fill level of 500 ml
8 Stainless steel guide pin
9 Plastic non-slip ring
10 Fill level indicator and MAX marking at 500 ml

Technical specifications

Model name:

SilverCrest SMZC 500 A1

Operating voltage: 220 - 240 V, 50/60 Hz

Power: max. 500 W

Speed levels: 2

Power cable length: approx. 100 cm

Dimensions: height approx. 24 cm, diameter approx. 17 cm

Weight incl. accessories: approx. 1,766 g

Max. fill level: 500 ml

Short-time duty (KB time) ^* : with cutting blades: 30 seconds

with emulsifying disc: 2 minutes

Protection Class II

* The short-time duty (KB time) is the maximum permitted continuous operating time without the electric motor overheating and potentially being damaged. After this operating period, you must switch off the Mini Chopper and wait for the motor to cool down to ambient temperature.

Safety instructions

Before you use this appliance for the first time, please read the following notes in this manual and heed all warnings, even if you are familiar with handling electronic devices and household appliances. Keep these operating instructions in a safe place for future reference. If you sell the appliance or give it away, pass on the user manual at the same time. It forms parts of the product.

Explanation of symbols

In this user manual, warnings are used as follows. Where applicable, some of these symbols are affixed to the product itself in order to alert the user to potential risks.

WARNING!

This symbol denotes important information for the safe operation of the product and user safety. It warns against risks which could, if left unheeded, cause danger to life and limb, injuries or material damage.

Risk of electric shock!

This symbol warns of risks which could, if left unheeded, cause damage to life and limb through electric shock.

Risk of fire!

This symbol warns that fires could start if the warning is left unheeded.

This symbol denotes further information on the topic.

Children and persons with disabilities

This appliance is not to be used by children. The appliance and its power cable (4) should be kept out of the reach of children. The appliance may be used by persons with reduced physical, sensory or mental capabilities and/or who have no experience in, or knowledge of, using such appliances providing they are supervised or have been instructed in how to use the appliance safely and

have understood the associated risks. Do not allow children to play with the appliance.

WARNING of suffocation!

Packaging material is not a toy. Do not allow children to play with plastic bags. There is a risk of suffocation.

WARNING of falling objects!

Make sure that children cannot pull the device from the work surface by the power cable (4). There is a danger of injury.

Keep the appliance out of the reach of children.

General safety instructions

Risk of electric shock!

• If the power cable (4) of this appliance is damaged, it must be replaced by the manufacturer, its customer service or a similarly qualified person, in order to avoid any possible danger.
• Never open the housing of the Mini Chopper. This does not contain any replaceable parts. Opening the housing can expose you to the risk of electric shock.
• If you notice any smoke, unusual noises or strange smells, switch off the appliance immediately and remove the plug from the mains socket. If this occurs, do not continue to use the appliance and have it checked out by an expert. Never inhale smoke from a possible appliance fire. If you do inadvertently inhale smoke, seek

medical attention. Smoke inhalation can be damaging to your health.

- Make sure that the power cable (4) cannot be damaged by sharp edges or hot spots.

- Make sure that the power cable (4) cannot get crushed or squashed.

- The appliance must always be disconnected from the mains when left unsupervised and before assembly, disassembly or cleaning.

- When disconnecting the power cable (4) from the mains socket, always pull on the mains plug and never on the power cable (4) itself.

- If you notice visible damage to the Mini Chopper or the power cable (4), switch off the device, remove the mains plug from the mains socket, and contact customer service (see "Warranty information" on page 74).

- Only connect the Mini Chopper to a properly installed, easily accessible mains socket with the same mains voltage as detailed on the name plate. After connecting the appliance, the mains socket must still be easily accessible so that you can remove the mains plug quickly in the event of an emergency.

- Never immerse the motor unit (2), the power cable (4) or the mains plug in water or other liquids. If liquid does penetrate the motor unit (2), disconnect the mains plug

from the mains socket immediately and contact customer service (see "Warranty information" on page 74).

- Never operate the Mini Chopper with wet hands.

Warning about property damage

• Do not leave the Mini Chopper unattended while running so you can react quickly in the case of hazards.
• If the cutting blades (5) or the emulsifying disc (6) only turn slowly or not at all, switch the Mini Chopper off immediately, disconnect the power cable (4) from the mains socket and check whether the cutting blades (5) or the emulsifying disc (6) are blocked or the food is too tough. Also check that you have assembled the Mini Chopper correctly.

- Please note the maximum fill level of 500 ml - see the fill level indicator (10).

- The Mini Chopper has a plastic non-slip ring (9). If necessary, place something underneath the device, as work-surfaces are sometimes treated with detergents which could attack or even dissolve the plastic non-slip ring (9).

Risk of overheating and fire

- Only ever operate the Mini Chopper with the glass bowl (7) filled and never empty.

• If you wish to whip cream, fill the glass bowl (7) with cream to at least the 200 ml level.
• Note the short-time duty (KB time). See the technical specifications on page 62.
• Do not use the appliance in direct sunlight or near heating appliances (heaters, stoves, ovens etc.).
• Do not place hot or boiling foods in the glass bowl (7). Otherwise the motor unit (2) could overheat or the glass in the bowl (7) could crack. Always allow hot or boiling foods to cool down first before adding them to the glass bowl (7) and processing them with the Mini Chopper.

Risk of injury

• Before changing accessories or fittings which move when the unit is running, switch it off and disconnect it from the mains socket.
• Never open the lid (3) or remove the motor unit (2) while the Mini Chopper is running. Otherwise, rotating bits of food may be thrown out with great force.
• The cutting blades (5) are extremely sharp. Be very careful when washing and handling the cutting blades (5).
• The cutting blades (5) continue to turn immediately after being switched off. Wait for the cutting blades (5) to come to a complete standstill before removing the motor unit (2), opening the lid (3) or taking other steps.

Before you start

Unpack the appliance. First check whether all the parts are complete and undamaged. If any items are missing or damaged, please phone our hotline (see "Warranty information" on page 74). Keep the packaging material away from children and dispose of appropriately.

Getting started

Before using the device for the first time, clean the lid (3), cutting blades (5), emulsifying disc (6) and glass bowl (7). For more on this, please refer to the "Maintenance / cleaning" section on page 71.

Use

Preparing food

Wash the food.

• For meat, remove tendons, bones and skin.
• For herbs, remove the stalks.
  • Cut solid food (e.g. meat, fish, vegetables) into chunks of around 2 to 3 cm square.
• Remove the outer shell of nuts.
• Cream should be kept as cool as possible so it whips better.

Setting up and filling the Mini Chopper

1. If the power cable (4) is connected to the mains socket, disconnect it from the mains socket.
2. Place the plastic non-slip ring (9) on an even, dry surface.
3. Place the glass bowl (7) on the plastic non-slip ring (9). Make sure that it is centred on the plastic non-slip ring (9) and the edges of the plastic non-slip ring (9) are not bent.

If you wish to chop or mix food, insert the cutting blades (5). Use the emulsifying disc (6) to prepare whipped cream.

1. Depending on what you wish to prepare, place the cutting blades (5) or the emulsifying disc (6) on the stainless steel guide pin (8).
2. Prepare the food (see previous section).
3. Fill the glass bowl (7) with the food to be processed. Note the recommendations (see page 70) and never overfill the glass bowl (7) beyond the maximum 500 ml level - see fill level indicator (10).
4. Place the lid (3) on to the glass bowl (7). When doing so, make sure that the thinner cylinder on the axle (see arrow) is protruding slightly through the hole in the middle of the lid (3).

Two technical diagrams showing a mechanical component with a base and top, each with a downward arrow indicating a force or adjustment (no text or symbols present)

1. Hold the glass bowl (7) in one hand and the lid (3) in the other and twist them gently against one another to check they are fitted firmly and properly.

2. Place the motor unit (2) on to the lid (3). Hold the motor unit (2) in one hand and the lid (3) in the other and twist them gently against one another. The motor unit (2) should rest in the two curved recesses in the lid (3) and it should no longer be possible to twist it. It sinks down slightly when properly fitted.

Warning!

Make sure the power cable (4) is not in your working area. Otherwise, you could accidentally pull on it and tip over the Mini Chopper or cause the motor unit (2) to fall off the glass bowl (7).

Switching on / selecting speed

The Mini Chopper can only be switched on once the motor unit (2) is properly locked into position on the lid (3).

Warning!

Hold the motor unit (2) firmly in place with one hand and the glass bowl (7) with the other when using the device to ensure the contents are not thrown out.

1. Connect the power cable (4) to a live mains socket.

2. Hold the motor unit (2) firmly and use your thumb to press the I or II button for the speed (1) you want. See the recommendations on page 70.

Warning!

Note the short-time duty (KB time) for the cutting blades (5) and the emulsifying disc (6). See the technical specifications on page 62.

1. Release the button for the speed (1) to switch off the Mini Chopper.

Risk of injury

The cutting blades (5) continue to turn immediately after being switched off. Wait for the cutting blades (5) to come to a complete standstill before removing the motor unit (2), opening the lid (3) or taking other steps.

Recommended speeds

The table below sets out the recommended quantities, speeds and processing times for various foods.

The quantities and times listed are guidelines to achieve the best possible results for the relevant ingredients. The values can vary based on consistency.

Ingredients Recommended quantity		Recommended time Recommended speed
Almonds 200 g coarse	1 x 10 sec.	fine 3 x 10 sec.inc. breaks	Speed II
Cloves of garlic 50 g pulsing		10 x 1 sec.	Speed II
Onions, coarse (quartered, approx. 10 g)	150 g pulsing 4 x 1	sec.breakpulsing 4 x 1 sec.	Speed I
Onions, fine (quartered, approx. 10 g)	150 g pulsing 5 x 1	sec.breakpulsing 5 x 1 sec.	Speed II
Diced meat (approx. 2 x 2 cm)	250 g 6 x 5 sec.	inc. breaks	Speed II
Diced cheese, e.g. Gouda (cooled, approx. 2 x 2 cm)	100 g 2 x 5 sec.	inc. breaks	Speed II
	200 g 3 x 5 sec.	inc. breaks	Speed II
Carrots (in approx. 2 cm pieces)	200 g coarse 1 x 5	sec.fine 2 x 5 sec.inc. breaks	Speed I
Ice cubes 100 g pulsing		coarse 10 x 1 sec.fine 20 x 1 sec.	Speed II
Cream* min. 200 ml	x 40 sec. Speed I

* Use the emulsifying disc (6) provided for whipping cream. The processing time until the desired consistency of cream is reached can vary based on the fat content. Please also note the maximum fill level of 500 ml also applies to cream.

The breaks set out in the list give the ingredients the chance to come back into contact with the cutting blades (5). If the ingredients get stuck to the inside of the glass bowl (7), push them down with a scraper, for example, and continue chopping.

Removing the chopped food / whipped cream

1. Unplug the mains plug (4) from the mains socket.
2. Remove the motor unit (2) and the lid (3).
3. Remove the cutting blades (5) or the emulsifying disc (6) from the glass bowl (7).

Risk of injury

The cutting blades (5) are extremely sharp. Be very careful when handling the cutting blades (5).

1. Remove the food. You can use a scraper, for example.
2. Clean the lid (3), cutting blades (5), emulsifying disc (6) and glass bowl (7). For more on this, please refer to the "Maintenance / cleaning" section on page 71.

After use

After use, clean the Mini Chopper as described in the "Maintenance / cleaning" section below. Then store the Mini Chopper in a safe place away from dust.

Maintenance / cleaning

It is recommended that you clean the Mini Chopper before first use and immediately after each use so that no remnants of food can set in the glass bowl (7) and on the cutting blades (5) or the emulsifying disc (6).

Risk of electric shock!

• Always remove the mains plug from the socket before cleaning. Failure to do so could cause an electric shock.
• Do not pour or spray any liquids onto the motor unit (2) and do not immerse it in water or other liquids. This could cause short circuits which could cause electric shocks or burns.

Warning about property damage

Do not use abrasive or astringent detergents or tools which could scratch the surface of the motor unit (2). This could cause damage to the motor unit (2) housing.

Clean the motor unit (2), the plastic non-slip ring (9) and the power cable (4) with a dry or damp cloth.

You can wash up the lid (3), the glass bowl (7), the cutting blades (5) and the emulsifying disc (6) normally or put them in the dishwasher.

Risk of injury

The cutting blades (5) are extremely sharp. Be very careful when washing and handling the cutting blades (5).

Storing the Mini Chopper

Store the Mini Chopper in a safe place away from dust. It is best to keep it assembled and leave the cutting blades (5) and emulsifying disc (6) in the glass bowl (7). This keeps all the individual parts to hand so they do not get lost and keeps the cutting blade (5) safely stored away so that nobody can accidentally cut themselves.

Troubleshooting

If your Mini Chopper does not work as normal, follow the instructions below to try to solve the problem. If working through the tips below does not fix the fault, please contact our hotline (see "Warranty information" on page 74).

Risk of electric shock!

Never try to repair the device yourself.

WARNING - Risk of injury!

Before putting your hands into the glass bowl (7), (for example, to remove stubborn food residues from the cutting blade (5)) or taking the motor block (2) out of the glass bowl (7), always remove the mains plug (4) from the mains socket and ensure that the cutting blades (5) are no longer turning.

Problem	Possible causes	yRemed
Mini Chopper not working	Mains plug not connected Connect the power cable (4) to a live mains socket.
	Motor unit (2) not fitted correctly to lid (3)	Place the motor unit (2) properly on to the lid (3). See steps 7 to 9 in the section on "Setting up and filling the Mini Chopper" on page 68.
The cutting blades (5) or emulsifying disc (6) are turning slowly or not at all.	Cutting blades (5) or emulsifying disc (6) are blocked or the food is too tough.	Remove any solid objects from the glass bowl (7).If necessary, add a little liquid to the glass bowl (7).Check that you have assembled the Mini Chopper correctly.

Environmental regulations and disposal information

Symbol of a trash bin with crossed x and y lines, plus a solid black rectangle below (no text or labels)

If this symbol depicting a crossed-out rubbish bin appears on a product, the product is subject to European Directive 2012/19/EU. All electrical and electronic devices must be disposed of separately from household waste at official disposal centres.

Do not dispose of the appliance in household waste or bulky waste collections. Information on collection points and pick-up times can be obtained from your local council or waste disposal company.

Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can be taken to paper recycling centres or public collection points for recycling. Any film or plastic contained in the packaging should be taken to your public collection points for disposal.

Conformity

This device complies with the basic and other relevant requirements of the EMC Directive 2014/30/EU, the Low-voltage Directive 2014/35/EU, the ErP Directive 2009/125/EC and the RoHS Directive 2011/65/EU. In order to receive the complete EU declaration of conformity, please send an e-mail to the following e-mail address: [e-mail]

Warranty Information

Dear Customer,

This device is sold with three years warranty from the date of purchase. In the event of product defects, you have legal rights towards the seller. These statutory rights are not restricted by our warranty as described below.

Warranty conditions

The warranty period commences upon the date of purchase. Please keep the original receipt in a safe place as it is required as proof of purchase. If any material or manufacturing faults occur within three years of purchase of this product, we will repair or replace the product free of charge as we deem appropriate.

Warranty period and legal warranty rights

The warranty period is not extended in the event of a warranty claim. This also applies to replaced and repaired parts. Any damage or defects discovered upon purchase must be reported immediately when the product has been unpacked. Any repairs required after the warranty period will be subject to charge.

Scope of warranty

The device was carefully manufactured in compliance with stringent quality guidelines and subjected to thorough testing before it left the works. The warranty applies to material and manufacturing faults. This warranty does not cover product components which are subject to normal wear and which can therefore be regarded as wearing parts, or damage to fragile components such as switches, rechargeable batteries or components made of glass. This warranty is void if the product is damaged, incorrectly used or serviced. To ensure correct use of the product, always comply fully with all instructions contained in the user manual. The warnings and recommendations in the user manual regarding correct and incorrect use and handling of the product must always be observed and complied with. The product is solely designed

for private use and is not suitable for commercial applications. The warranty is rendered void in the event of incorrect handling and misuse, if it is subjected to force, and also if any person other than our authorised service technicians interfere with the device. No new warranty period commences if the product is repaired or replaced.

Submitting warranty claims

To ensure speedy handling of your complaint, please note the following:

• Before using your product for the first time, please read the enclosed documentation carefully. Should any problems arise which cannot be solved in this way, please call our hotline.
• Always have your receipt, the product article number as well as the serial number (if available) to hand as proof of purchase.
• If it is not possible to solve the problem on the phone, our hotline support staff will initiate further servicing procedures depending on the fault.

Service

Phone: 020 - 70 49 04 03

E-Mail: [e-mail]

Phone: [phone]

E-Mail: [e-mail]

Phone: [phone]

E-Mail: [e-mail]

Phone: 02 - 20 09 025

E-Mail: [e-mail]

IAN: 274361

Manufacturer

Please note that the following address is not a service address. First contact the service point stated above.

TARGA

GmbH

Coesterweg 45

59494 SOEST

GERMANY