Chilli Pro 2000 - Food processor OBH NORDICA - Free user manual and instructions

Brand	OBH Nordica
Model	Chilli Pro 2000
Product Type	Food Processor
Model Numbers	6798, 6799
Power Rating	500 W
Voltage	220-240 V AC
Bowl Capacity (Dry)	2.0 L
Bowl Capacity (Liquid)	1.2 L (recommended max)
Number of Speeds	2 plus Pulse
Included Accessories	Steel knife, plastic kneading/mixing knife, whisk, carving disc (fine and coarse), grating disc (fine and coarse), French fry cutting disc, disc holder, pusher
Blade Material	Stainless steel
Bowl Material	Plastic
Lid Locking	Yes, safety interlock prevents operation if not correctly positioned
Pulse Function	Yes, for short bursts
Maximum Operating Time	Up to 1 minute for chopping, up to 3 minutes for kneading
Dishwasher Safe	No, hand wash only
Motor Part Cleaning	Wipe with damp cloth, do not immerse
Safety Features	Lid interlock, sharp blade warnings
Warranty	Standard legal warranty; return to store of purchase with receipt
Manufacturer	OBH Nordica Denmark A/S, Sweden, Norway
Intended Use	Domestic only

Frequently Asked Questions - Chilli Pro 2000 OBH NORDICA

How do I assemble the food processor?

First, mount the driving shaft on the motor part. Place the bowl on the motor part and turn clockwise until you hear a click. Then mount the desired accessory on the driving shaft using the accessory holder. Put the lid on the bowl, ensuring the plastic rod on the lid is to the right of the bowl grip, and turn clockwise until it clicks. The appliance will not start unless both bowl and lid are correctly locked.

What is the maximum capacity for liquid ingredients?

The bowl has a total capacity of 2.0 L, but for liquids the recommended maximum is 1.2 L to avoid overfilling. Always check the measurement scale on the bowl.

Can I wash the parts in a dishwasher?

No, do not wash any parts in a dishwasher. All removable parts (bowl, lid, pusher, accessories) should be washed by hand in warm water with mild detergent. The motor part should only be wiped with a damp cloth.

Why does the food processor suddenly stop during use?

The preparation bowl may loosen if handled roughly. Ensure the bowl is correctly locked. If the motor stops due to overloading, reduce the amount of ingredients or add water if kneading dough. Always allow the motor to cool before restarting.

Can I chop hard spices or coffee beans?

No, do not chop hard spices like nutmeg, coffee beans, or ice cubes as they can damage the stainless steel knife. Use the food processor only for softer ingredients.

How do I use the pulse function?

Turn the speed selector to the 'Pulse' position (marked as '0' with a pulse symbol). Press and hold the selector in that position for short bursts. Release to stop. This is ideal for coarse chopping or when you need precise control.

What is the maximum temperature for ingredients?

Warm liquids and ingredients should not exceed 50 °C when placed in the bowl. Higher temperatures may damage the bowl.

How should I clean the sharp blades and discs?

Rinse the steel knife and cutting discs under warm water with mild detergent immediately after use. Wipe carefully and store safely. Use a soft brush for any congealed remains. Always handle blades with extreme caution due to sharpness.

What should I do if the food processor does not start?

Check that the bowl and lid are correctly positioned and locked. Ensure the speed selector is set to a speed or pulse, not '0'. Verify the power cord is plugged into a working outlet. If it still does not start, consult the troubleshooting section of the manual.

Can I use the food processor for kneading yeast dough?

Yes, use the plastic kneading and mixing knife for yeast dough. Maximum capacity is flour 600 g and water 400 g. Set speed to 2 and process for about 20 seconds. If the motor slows, add a little water and hold the lid securely.

USER MANUAL Chilli Pro 2000 OBH NORDICA

pro 2000 //

food processor //

500 WATT

8

500 watt // 8 multipurpose

attachments //

2 LITRES

Capacity 2.0 l dry bowl //

1.2 LITRES

Capacity 1.2 | liquid bowl //

2

2 speeds and pulse //

Type 6798,6799

OBH Nordica Denmark A/S

Ole Lippmanns Vej 1

2630 Taastrup

Tlf.: 43 350 350

www.obhnordica.dk

Tekniske data

OBH Nordica 6798 / 6799

OBH Nordica Food Processor

Innan användning

Användning

OBH Nordica Sweden AB

Box 58

163 91 Spånga

Tel [phone]

www.obhnordica.se

Tekniske data

OBH Nordica 6798 / 6799

OBH Nordica Norway AS

Postboks 5334, Majorstuen

0304 Oslo

Tlf: 22 96 39 30

www.obhnordica.no

Tekniske data

OBH Nordica 6798 / 6799

220-240V vekselstrøm

500 watt

Kapasitet 2 liter

OBH Nordica Food Processor

Before use

Before you use the food processor for the first time, please read the instruction manual carefully and save it for future use.

Wash all removable parts in warm water with a washing-up liquid before use.

NOTE: The knife is extremely sharp and should be handled with extreme care.

Parts of the appliance

1. Motor part
2. Driving shaft
3. Bowl
4. Holder for accessories
5. Lid
6. Pusher
7. Disc holder
8. Carving disc – fine and coarse cutting
9. Grating disc – fine and coarse cutting
10. French fry cutting disc
11. Knife (steel)
12. Kneading and mixing knife (plastic)
13. Whisk

How to use the food processor

The food processor can be used to blend, chop, grate, carve and mix food.

The motor of the food processor drives the cutting blades at high speed to ensure a good and homogeneous result. Consequently, it is important always to place the appliance on an even and dry surface before use.

Make sure that the bowl and lid are correctly positioned on the motor part. If not, the food processor cannot start. To position the bowl correctly, mount the driving shaft on the motor part. Put the bowl on the motor part and turn the handle of the bowl clockwise. You will hear a click when the bowl has been properly engaged. Mount the wanted accessory (see section “Mounting of accessories”). Put the lid on the bowl. The plastic rod on the outer side of the lid shall be to the right of the grip of the bowl. Turn the lid clockwise. The lid has been correctly positioned when you hear a click. Please note that the appliance cannot be started until the bowl and the lid have been correctly positioned.

Always be sure that there are ingredients in the bowl before starting the food processor.

The maximum capacity of the bowl is 2.0 L, but in order to be sure that the bowl is not overfilled, the amount should be max 1.2 L. When preparing certain kinds of food, the capacity will be less. As to details of maximum quantities, please see the table in section "Quantities and guiding times of preparation". Use the measurement scale on the bowl as an indication.

When the bowl and the lid have been correctly positioned, the food processor is ready for use. Check that the speed selector is at position "0" and then plug the appliance in the mains supply. Turn the speed selector to the wanted speed for a few seconds. Then turn it back to "0" and see whether you get the result you want. The process is very fast, so do not work too long at a time. Take off the lid by grabbing the hopper and turn counter-clockwise to remove the lid.

Use the function “Pulse” (moment) for short intervals. Keep the contact in that position to make the food processor work. As soon as the button is released, the food processor will stop.

Mounting of accessories

All accessories shall be mounted on the driving shaft in the centre of the bowl. Mount the driving shaft on the motor part. Be sure to position the bowl correctly.

Knife (steel) (11)

Remove the cover. Please note that the knife is extremely sharp, so please do not touch the blades! Mount the knife in the bowl on the driving shaft by pressing the accessory holder until it is locked onto the driving shaft and then remount the knife. Put on the lid as previously described. Set the speed selector at "2". The total operation time should not exceed 1 minute.

After use, turn the speed selector back to "0". Remove the knife and the accessory holder from the driving shaft by lifting the knife off the accessory holder and pull the accessory holder. Then remove the bowl from the motor part by turning it counter-clockwise.

Use the "Pulse" function to avoid that the ingredients are too finely chopped.

Normal cooking time is about 30-60 seconds.

The steel knife is used to chop chocolate, cheese, meat, spices, fruit, and vegetables (e.g. onions).

Kneading and mixing knife (12)

Put the bowl on the motor part and mount the plastic knife on the driving shaft by pressing down the accessory holder until it locks onto the driving shaft and then mount the knife. Put the lid on the bowl as previously described. Set the speed selector at "2". Normal cooking time is about 30-180 seconds.

NOTE: Add water if the speed is slowing down or the food processor stops during use in order to avoid that the motor is damaged. Hold on to the lid with one hand during kneading/mixing and hold on to the grip at the same with the other hand. The kneading/mixing takes about 30-180 seconds.

After use, set the speed selector back to "0". Remove the knife and the accessory holder from the driving shaft by first lifting the knife out of the accessory holder and then pull the accessory holder. Now remove the bowl from the motor part by turning it counter-clockwise.

Whisk (13)

Mount the whisk by first positioning the accessory holder on the driving shaft. Then mount the whisk on the accessory holder. Mount the lid as previously described. Set the speed selector at "1" or "2".

The whisk is for whipping egg whites, cream etc.

Disc for grating, carving and French fry cutting (7,8,9,10)

Mount the bowl and the driving shaft on the food processor. Then choose the wanted disc. Mount the disc in the disc holder (7) with the cutting blade facing upwards and place the disc holder on the driving shaft. Position the lid on the disc and turn the lid clockwise until it engages. Set the speed selector at "1" or "2".

The grating and carving disc can be used for cutting potatoes, onions, cucumbers, roots, apples, and carrots etc.

Pusher (6)

Always use the pusher to push firm ingredients into the hopper. NEVER use your fingers, a spatula or utensils other than the delivered pusher for this purpose. Liquid and small ingredients can advantageously be added via the hopper.

Quantities and indicative cooking times

Accessory To be used for: Max. capacity Setting Cooking time Comments
Knife Chopping e.g.: Meat and onion Fruit and vegetables Cheese Chocolate Spices	Approx. 500 g 100-300 g Approx. 200 g Approx. 100 g Approx. 50-100 g	Pulse (moment) or 2	15 – 20 sec. Cut the ingredients in suitable pieces (cubes or bars of about 3 cm). Pulse setting is perfect for a coarser chopping, whereas you can use setting 2 for finer chopping.
Plastic knife	Mixing of e.g. shortcrust pastry	Approx. 300 g 2 Max. 1 minute
	Kneading of e.g. pastry	Approx. 1 kg 2 Max. 1 minute
	Kneading of e.g. yeast dough	Flour approx. 600 g Water about 400 g	2 20 sec.
Slicing discs	Cutting e.g. vegetables, cheese, potatoes, slicing of fruit	Approx. 1.2 l 1 or 2 Cut the ingredients in suitable pieces (cubes or bars of about 3-4 cm).
Rive-plader	Rive f.eks. gröntsager, ost, kartofler, chokolade, frugt	Approx. 1.2 l 1 or 2 Cut the ingredients in suitable pieces (cubes or bars of about 3-4 cm).
French fry cutting disc	Grating potato bars	Approx. 1.2 l 1 or 2 Cut the potatoes in suitable pieces to fit the hopper.
Whisk Whip egg whites 2-5 eggs 2	30-70 sec. Use at least 2 and max 5 egg whites.
	Whip cream	125-350 ml	2	20 sec.	Be careful not to whip too long – it is preferable to whip in more turns.

NOTE!

• The temperature of warm liquids and ingredients must not exceed about 50 °C, when put in the bowl.
• Hard spices (such as e.g. nutmeg, coffee beans or ice tubes) must not be chopped in the food processor as this might damage the knife.

How to disassemble the appliance

1. Remove the pusher. Turn the lid counter-clockwise, lift it and take it off.
2. Remove the knife, the whisk or the disc.
3. Remove the accessory holder.
4. Turn the bowl counter-clockwise to remove it from the motor part.
5. Remove the driving shaft.

Cleaning and maintenance

Always unplug the appliance from the mains supply before cleaning. Never immerse the motor part into water or other liquids. Use a damp cloth to clean the motor part. The bowl, the lid, the pusher and the blending mug can be washed in hot water with washing-up liquid. Wipe all parts thoroughly before storing the food processor. Do not wash the parts in a dishwasher. Do not use scouring powder or other aggressive detergents that can scratch or deaden the surface.

ATTENTION!

The knife and the cutting blades of the discs are very sharp. So be careful. Rinse the knives and the discs in warm water with a washing-up liquid and wipe carefully before storing the appliance.

Remove any congealed remains after a short soaking with a mild detergent and a soft brush.

IMPORTANT: NEVER IMMERSE THE MOTOR PART INTO ANY KIND OF LIQUID!

Trouble shooting

The appliance does not work: Check that the food processor has been correctly assembled
The appliance suddenly stops: Note:	The preparation bowl may loosen if treated hard
The motor is running, but the ingredients do not move:	Check that the driving shaft has been correctly mounted

Safety instructions

1. Read the instruction manual carefully before use, and save it for future use.
2. Plug the appliance to a household outlet of 230V only, and use the appliance only for the intended use.
3. Always unplug the appliance from the mains supply when disorder is experienced, when not in use, when parts are applied or removed from the appliance and before cleaning and maintenance.
4. The appliance must not be immersed into water or other liquids.
5. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
6. Children should be supervised to ensure that they do not play with the appliance. Children are not always able to understand potential risks. Teach children a responsible handling of electrical appliances.
7. Check that the cord is not hanging over the edge of the table.
8. Do not place the appliance on or near hotplates, open fire or the like.

9. The appliance should only be used under supervision.

10. Be careful to handle the appliance correctly. The appliance shall be handled with care, since the knife and the cutting edge of the discs is extremely sharp! Do not touch when in use. Be very careful when handling the knife, in particular when the knife is removed from the bowl, when the bowl is emptied and during cleaning.

11. Always examine appliance, cord and plug for damage before use. If the supply cord is damaged, it must be replaced by the manufacturer, his service agent or a similarly qualified person in order to avoid any hazard.
12. The electrical installation must comply with the present legislation concerning additional protection in the form of a residual current device (RCD) with a rated residual operating current not exceeding 30 mA). Check with your installer.
13. The appliance is for domestic use only.
14. If the appliance is used for other purposes than intended, or is not handled in accordance with the instruction manual, the full responsibility for any consequences will rest with the user. Any damages to the product or other things are not covered by the warranty.

Disposal of the appliance

Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with the symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.

Warranty

Claims according to current law. Cash receipt with purchase date shall be enclosed with any claims. When raising a claim the appliance must be returned to the store of purchase.

OBH Nordica Denmark A/S

Ole Lippmanns Vej 1

DK-2630 Taastrup

These instructions are subject to alterations or improvements.

OBH NORDICA