SB4116H - Drill Holzmann - Free user manual and instructions
Find the device manual for free SB4116H Holzmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bench Drill (Pillar Drill) |
| Brand | Holzmann |
| Model | SB4116H |
| Motor Power | 550 W |
| Speed Range | 250 - 3000 RPM (variable) |
| Chuck Capacity | 1.5 - 16 mm (keyless chuck) |
| Drilling Capacity (Steel) | 16 mm |
| Drilling Capacity (Wood) | 32 mm |
| Table Dimensions | 250 x 250 mm |
| Column Diameter | 70 mm |
| Max Distance Spindle to Table | 400 mm |
| Spindle Taper | MT2 (Morse Taper #2) |
| Overall Dimensions (L x W x H) | 400 x 600 x 1100 mm |
| Net Weight | 45 kg |
| Power Supply | 230 V, 50 Hz, 2.4 A |
| Protection Class | IP20 (indoor use only) |
| Main Functions | Drilling, countersinking, reaming, tapping (with proper attachment) |
| Maintenance | Regularly lubricate spindle and table; clean swarf; check belt tension |
| Safety Features | Emergency stop switch, chuck guard, overload protection |
| Spare Parts Availability | Contact local distributor or Holzmann service |
| Repairability | Modular design: motor, switch, belts, bearings replaceable |
| Included Accessories | Keyless chuck, chuck key, operating manual |
Frequently Asked Questions - SB4116H Holzmann
What is the maximum drilling capacity of the SB4116H?
The maximum drilling capacity in steel is 16 mm, and in wood it is 32 mm.
What type of chuck does the SB4116H use?
It uses a keyless chuck with a capacity of 1.5 to 16 mm.
How do I change the speed on the SB4116H?
The speed is adjusted by moving the belt to different pulleys on the motor and spindle. Refer to the manual for belt positions and corresponding speeds.
Is the SB4116H suitable for tapping threads?
Yes, with a tapping attachment and proper speed setting, it can be used for tapping. Ensure the work is securely clamped.
How do I maintain the SB4116H drill?
Regularly lubricate the spindle and table with light oil, clean metal shavings from the table and motor, and check belt tension periodically.
What safety equipment should I use with the SB4116H?
Always wear safety glasses. Securely clamp workpieces. Use the chuck guard and emergency stop when needed. Do not wear loose clothing.
What is the weight of the SB4116H?
The net weight is approximately 45 kg.
Can I use the SB4116H for woodworking?
Yes, it can drill wood up to 32 mm diameter. Use appropriate drill bits for wood to avoid splintering.
How do I adjust the table on the SB4116H?
Loosen the locking handle under the table, slide or rotate the table to the desired position, then tighten the handle securely.
What should I do if the drill bit slips in the chuck?
Ensure the chuck is fully tightened. If using a keyless chuck, twist it firmly. If slipping persists, clean the chuck jaws and the bit shank.
User questions about SB4116H Holzmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual SB4116H - Holzmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SB4116H by Holzmann.
