Bruno - Beard trimmer Eta - Free user manual and instructions

Product Type	Beard Trimmer
Brand	Eta
Model	Bruno
Dimensions (approx.)	6.0 × 2.0 × 1.5 in (15.2 × 5.1 × 3.8 cm)
Weight (approx.)	5.3 oz (150 g)
Power Source	Rechargeable lithium-ion battery
Charging Time	8 hours for full charge
Usage Time	45 minutes of cordless use
Adjustable Length Settings	10 length settings (1–10 mm)
Blade Type	Stainless steel, self-sharpening
Detachable Head	Yes, for easy cleaning
Washable	Yes, removable head is waterproof
LED Display	Battery level indicator
Included Accessories	Cleaning brush, guide combs (3, 5, 7 mm), charging cable
Maintenance	Regular cleaning with brush; oil blades periodically
Safety Features	Water resistant (IPX4), auto shut-off after 5 min of no use
Spare Parts Available	Replacement blades and guide combs sold separately
Repairability	Modular design; replacement parts can be installed by user
Warranty	2 years limited warranty

Frequently Asked Questions - Bruno Eta

How do I charge the Eta Bruno beard trimmer?

Connect the provided USB charging cable to the trimmer and a USB power source (adapter not included). The LED indicator will show charging status. A full charge takes about 8 hours.

Can I use the trimmer while it is plugged in?

No, the Eta Bruno is designed for cordless use only. Do not operate while charging to avoid risk of electric shock.

How do I clean the trimmer?

Remove the detachable head and rinse it under running water. Use the cleaning brush to remove hairs from the blades. Let all parts dry completely before reattaching.

How do I change the length setting?

Rotate the adjustable dial on the trimmer to select your desired length from 1 to 10 mm. The current setting is shown on the dial indicator.

Is the trimmer waterproof?

The trimmer has an IPX4 water resistance rating, meaning it can withstand splashes but should not be submerged. The removable head is fully washable.

What should I do if the blades become dull?

The stainless steel blades are self-sharpening, but if performance declines, you can replace them. Contact Eta customer service or check the spare parts section for a replacement blade set.

How long does the battery last after a full charge?

The lithium-ion battery provides approximately 45 minutes of continuous use. The LED indicator will show remaining charge, and the trimmer will auto shut-off when battery is low.

Can I use the trimmer on wet beard?

Yes, the detachable head is waterproof, so you can use it with shaving foam or gel and rinse it afterwards. However, the main body should not be submerged.

Why is my trimmer not turning on?

Ensure the battery is charged. If it still does not turn on, try cleaning the blade assembly as hair debris may block the motor. If the problem persists, contact Eta support.

Where can I find replacement parts or accessories?

Replacement blades, guide combs, and other accessories are available on the Eta website or through authorized retailers. Check the manual for part numbers.

USER MANUAL Bruno Eta

Multi-purpose clipper 5 in 1 • INSTRUCTIONS FOR USE

Black and white photo of a Eta care kit with multiple teeth and a toothbrush (no visible text or symbols)

CZ I. BEZPEČNOSTNÍ UPOZORNĚNÍ 3

II. POPIS SPOTŘEBIČE A PŘÍSLUŠENSTVÍ (obr. 1) 6

III. POKYNY K OBSLUZE 6

IV. ÚDRŽBA 11

V. EKOLOGIE 11

VI. TECHNICKÁ DATA 12

SK I. BEZPEČNOSTNÉ UPOZORNENIA 13

II. OPIS SPOTREBIČA A PRÍSLUŠENSTVA (obr. 1) 16

III. NÁVOD NA OBSLUHU 16

IV. ÚDRŽBA 21

V. EKOLÓGIA 21

VI. TECHNICKÉ ÚDAJE 22

GB I. SAFETY WARNING 23

II. DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (fig. 1) 25

III. INSTRUCTIONS FOR USE 25

IV. MAINTENANCE 31

V. ENVIRONMENTAL PROTECTION 31

Close-up of a black pen tip being inserted into a clip, labeled with number 4 and letter A (no text or symbols on the object itself)

Close-up of a black pen tip being inserted into a clip, labeled with number 4 and letter A (no text or symbols on the object itself)

Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep these instructions including the warranty, the receipt and, if possible, the box with the internal packing

I. SAFETY WARNING

• Before the first use, read the instructions for use carefully, look at the picture and keep the instructions for use.
• Check whether the data on the type label correspond with the voltage in your socket.

- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children younger than 8 years must be kept out of reach of the appliance and its charger.

- Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the charger from the power socket!

- If the power cord of the charger is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.

• Never use the appliance if its power cord or charger is damaged, if it does not work properly, if it fell down and was damaged and it is leaking. In this case take the appliance to a special service to check its safety and proper function.
• For additional protection we recommend installation of current protection (RCD) with the nominal release current not exceeding 30 mA. Ask a control technician or an electrician for advice.
• The appliance is intended for use in households only and for similar use! It is not designed for use in hair salons or for other commercial use!
• Do not put or take out the plug to or from a socket with wet hands!
• Do not let the appliance in operation without supervision!
• Never immerse the appliance, the charging dock or the adaptor in water or other liquids (not even partly) and never wash in running water!
• Use only the accessories designed for this type. Do not use damaged adapters.
• Never tuck the appliance or the accessories into any body holes.
• The trimmer and the stand with the plugged adapter must not be used at places where it could fall into a bath tub, a wash basin or a swimming pool. If the trimmer fell to water anyway, do not take it out! First of all, unplug the adapter from the socket and only then remove the trimmer. In this case take the appliance to a special service to check its safety and proper function.
• Be careful in using the appliance without a set adapter, the blades are sharp.
• Do not use the appliance while having a bath, having a shower or taking a sauna and for trimming wet or artificial hair. Keep the appliance dry.
• The appliance is not intended for styling animal hairs.
• Never charge the appliance in direct sunlight or close to heat sources and if the temperature is below 10^ or above 40^ . If the appliance is fully loaded (all the control lights are permanently on), unplug the charging device.
• In case the cutting lath or one of the cutting attachments gets blocked, the appliance must be turned off immediately and the cause removed.
• Check regularly, if the blades are not damaged or deformed.
• Do not attempt to repair the appliance yourself.
• Keep the special oil bundled with the device out of reach of children, persons insane. Heed the instructions written on the package when handling!
• It is not allowed to alter the surface of the appliance in any way (e.g. sticker, foil etc.)!
• Do not use the appliance if the razor strip has been damaged, has visible fissures or if the strip is torn.
• The appliance gets hot when charging which is absolutely normal.
  – Charge the battery in temperature close to room temperature.
• Do not dispose the battery into fire. There is a risk of explosion!
• Do not charge a battery which is leaking electrolyte.

• Electrolyte leaking from a battery is caused by overloading the appliance or using it in extremely high temperatures. If you spill electrolyte on yourself, wash the area with water and soap and rinse with lemon juice with vinegar. If the liquid got into your eyes, wash the eye with fresh water for several minutes and find medical help immediately.

• Do not expose the battery to temperatures higher than 50^ to prevent damaging the battery.

• Do not put the trimmer on hot heat sources (e.g. oven, stove, radiator, etc.)
• If the appliance was stored at lower temperatures, acclimatize it first, by which you remove stiffness of the lubricating fat in bearings and mechanical resistance of the plastic parts will be maintained.
• Also, do not put the trimmer in the on position on soft surfaces (e. g. bed, towels, sheets, carpet); the surfaces or the appliance could get damaged.
• The power cord of the adapter must not be damaged with sharp or hot objects, open fire and it must not be sunk into water.
• If you need to use the extension cord, it has to be uncorrupted and it has to comply with the valid standards.
• The adaptor supplied with this appliance is intended for this appliance only, do not use it for other purposes. Also, use only the supplied adaptor with this appliance, do not use any other adaptor for charging (e.g. from another appliance).
• Never use the appliance for any other purpose than for the intended purpose described in these instructions for use!
• During normal operation, the accumulator batteries are not taken out. Take out the batteries only if the appliance is to be disposed (see par. V. ENVIRONMENTAL PROTECTION).
• Do not insert the tip B3 further than 5 ~mm into the ear as this could caused damage to the eardrum (nor in the nose).
• All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
• The producer is not responsible for any loss caused by improper handling of the appliance and its accessories (e. g. injury, appliance damage, fire, etc.) and its guarantee for the appliance does not apply in the case of non-compliance with the safety instructions above.

II. DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (fig. 1)

A - trimmer

A1 – switch 0/I A4 – blade cut length switch

A2 – indicator light A5 – socket for charging

A3 - blades

B - attachments

B1 – big cutting attachment B4 – shaving attachment

B2 – small cutting attachment B5 – thin mini-attachment

B3 – Attachment for trimming hairs in nose and ear

C - comb attachments

C2 - comb attachments for the big cutting attachment B1 (3; 6; 9; 12; 12-23 mm)

C2 - comb attachments for the small cutting attachment B2 (4, 6, 8 mm)

D - attachment

D1 – dock D5 – socket for charging

D2 – charging adapter D6 – case

D3 - brush D7 - comb

D4 – Blade lubrication oil

1
B

D

III. INSTRUCTIONS FOR USE

Before you can use the appliance, its batteries must be charged. The operation time for one charge depends on the attachment used and workload. The time with the big cutting attachment is around 90 minutes. With the smaller attachments, this time is significantly longer.

To Charge/Recharge

• Fully charge Clipper before using for the first time or after non-use for a long period of time.
• Battery performance is best if you recharge only when the battery is (almost)completely empty.
• Charging or recharging at temperatures below 10^ or higher than 40^ adversely affects lifespan of the battery.
• Continuously recharging Clipper will reduce lifespan of battery.

1) Be certain Clipper is OFF.
2) Charging: plug the connector into the socket A5 or into the dock and accessory holder (see pic. 2), where you place the trimmer (socket D5).
3) Plug charging plug into any 230V AC outlet. Use only the cord provided
4) It will take approximately 0,5 - 2 hours to fully charge the Clipper.
5) Do not exceed the set time of charging! There is an indicator light A2 on during charging. When the battery is charged, green light turns on.
6) After charging, unplug the adaptor from the mains first and only then unplug the connector from the appliance.

Optimize the working life of the battery

• Do not charge for more than 2 hours.
• Do not keep cord permanently plugged in.
• The appliance heats up during charging or operation, which is normal.

First select the attachment you want to use for cutting purposes. You have 5 different cutting attachments with different uses to choose from. All these cutting attachments (B1, B2, B3, B4, B5) are put on the appliance in the same manner. Follow instructions on pic. 3. First put the desired attachment to the bottom part of the space for the attachment head (pic. 3A). Then fold the remaining part of the attachment on by pressing lightly (pic. 3B). Correct fixation of the attachment is indicated by an audible click (pic. 3C. When removing the attachment, proceed reversely. Press lightly on the fixed attachment from the front part of the attachment. This will release it, you can now remove it.

Cutting attachments B1 and B2 can be used with comb attachments with various length of cutting. All these comb attachments C are put on in the same manner (follow the instructions on pic. 4A, 4B, 4C^1 ). When removing the comb attachment, proceed reversely (pic. 4C^2 ).

Hair clipping

• The trimmer can be operated from the outlet with the adaptor connected or only from the charged battery. In case an attachment B gets blocked (or the blades A3), the appliance must be turned off immediately and the cause of the block removed.
• The trimmer turns on and off with a switch A1. Turn the trimmer on only after all the attachments have been properly placed and you are ready for trimming. Turn the trimmer off immediately after use.
• We recommend oiling the blades with the oil D4 attached before first use.

• Before you start clipping, make sure that the head of the person whose hair you are cutting is at the same level as your chest so that all parts of his/ her head are clearly visible and within easy reach.

• Only use the clipper on dry hair.

• Do not use on freshly washed hair.
  – Before you begin, comb the hair in the direction of growth.
• To achieve optimal clipping results, always move the clipper slowly through the hair against the direction of hair growth.
• When the appliance is in operation, the A2 light is green, when the battery power reaches minimum, the light begins to flash red. It is a signal to charge the battery.

Clipping with hair comb attachment

You may use 2 kinds of comb attachments C for trimming, depending on the attachment (B1, B2) used.

1) Choose one of the two cutting attachments (B1, B2), on which you may then put on the comb attachments C arbitrarily, depending on the desired haircut length. Put this attachment on properly.
2) Put on the desired comb attachment C depending on the chosen size of the attachment. Then you can turn on the appliance. One of the C1 attachments has variable size of the cut (12-23 mm).
3) If you are trimming for the first time, begin by trimming with an attachment of max. length to prevent too short of a cut. When you have familiarized yourself with the settings, use attachments C with lower length.
4) You may also use the blade cut length switch A4 for finer cut setting.
5) Make sure that the flat part of the comb is always in full contact with the scalp to obtain an even result.
6) Move the clipper slowly over the crown from different directions to achieve an even result.
7) Always move the clipper against the direction of hair growth.
8) Make overlapping passes over the head to ensure that all hair that should be cut has been cut.
9) Turn the Clipper off and remove the hair comb often to blow and/or shake out hair that has accumulated.

Contouring without the hair clipping comb attachment

Choose the appropriate attachment B1 or B2 depending on your desired length of cut. For more precise styling and trimming you may use the narrow mini-attachment B5.

1) Remove the hair comb (if it is attached). Be careful when you are clipping without comb attachment as when the clipper is turned on it will trim every hair it touches.
2) Tilt the clipper in such a way that only one edge of the trimming attachment touches the hair ends when you shape the contours around the ears.
3) To contour the nape of the neck or hairline, turn the clipper and hold it with the trimming attachment pointing downwards.
4) To contour the sideburns, turn the clipper and hold it with the trimming attachment pointing downwards.

Note

You may also use the blade cut length switch A4 for finer cut setting.

Trimming Nose Hair

1) Make sure nasal passages are clean.
2) Place nose, ear and eyebrow attachment B3 on Clipper.
3) Switch the Clipper on and insert the tip of the attachment into one nostril.

Illustration of a pen tip being inserted into a cylindrical object, labeled with number 4 and letter A (no text or symbols on the object itself)

4) Slowly move the tip in and out while turning it around at the same time in order to remove unwanted hair. For best results, make sure the side of the tip is firm against skin. This will reduce the tickling effect that can occur during trimming of nose hair.
5) Turn off Clipper. Wipe attachment clean after each use.

CAUTION

Do Not insert the tip more than 5 mm into your nostril.

!

Trimming Ear Hair

1) Clean outer area of ear and ear canal. Make sure it is free of wax.
2) Nose, ear and eyebrow attachment B3 should be on the Clipper.
3) Switch the Clipper on and move the tip softly around the edge of ear to remove hairs extending beyond the outer ear.
4) Carefully insert the tip into outer ear canal.
5) Turn off Clipper. Wipe attachment clean after each use.

!

Do not insert the tip further than 5 mm into the ear as this could caused damage to the eardrum.

Shaving With Micro Shaver Attachment

1) Put on the shaving attachment B4 on the appliance.
2) Use the narrow micro shaver to shave along contoured edges to remove any stubble while creating a smooth welldefined beard line. Before using the micro shaver, always check it for wear and damage. If the micro shaver shows signs of wear or damage, do not use it as injury may occur. Do not use the micro shaver until it has been replaced. Gently press the micro shaver onto the skin. Do not press too hard.

Trimming facial hair

Choose the appropriate attachment B1 or B2 depending on your desired length of cut.

1) Wet facial hair slightly and brush it before trimming.
2) Mark a facial hair line with the trimmer and cut off the hairs exceeding this line from the outer perimeter.
3) If you want to achieve an even trim of facial hair, use one of the attachments C or trim carefully the ends by small pieces over the brush in such a way that the brush moves through the hair upwards. Repeat the process in the whole facial hair area.
4) After trimming shave the parts around the beard in a usual way.
5) For more precise styling and trimming you may use the narrow mini-attachment B5.

Trimming a mustache

Choose the appropriate attachment B1 or B2 depending on your desired length of cut.

1) Wet mustache slightly and brush it before trimming.
2) Trim carefully over a brush to achieve an even cut of the mustache.
If you prefer using your finger as a guide, proceed accordingly.
3) For more precise styling and trimming you may use the narrow mini-attachment B5.

IV. MAINTENANCE

Turn off the appliance before each maintenance, or unplug the adapter from the electric socket! Do not use rough and aggressive detergents! Wipe the trimmer surface with a wet soft cloth.

Cleaning blades

Clean the blades with the brush attached. If the blades are very dirty, you can remove the whole cutting attachment and clean it under running water. After drying it thoroughly, put the attachment with the blades back on the trimmer reversely. In order to keep the trimmer in a perfect condition, you have to lubricate the list with blades using one or two drops of oil for sewing machines (figure 5). Do not use hair oil, petroleum jelly or oil mixed with petrol or any other solvent because after evaporation the solid parts of the lubricant could slow down operation of the blades. Insert the trimming head to the trimmer properly, turn on the trimmer and then turn it off and wipe out the excessive oil from the blades.

Storage

Put the trimmer with the accessories back to the original package at a dry and dust free place, out of reach of children and incapacitated people. You can use the accessory stand for this purpose (see pic. 5A).

V. ENVIRONMENTAL PROTECTION

If the dimensions allow, there are marks of materials used for production of packing, components and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at the special collection places where they will be received free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authorities or at a collection site. Fines can be afflicted for improper disposal of this type of waste in agreement with the national regulations.

The appliance is equipped with rechargeable Li-ion batteries with long life.

For environmental protection it is necessary to dismantle (see pic 5B) discharged batteries after the end of life of the appliance. Dispose of the batteries in a suitable and safe way through the special collection networks. Never dispose of the batteries by burning!

More extensive maintenance or maintenance requiring intervention in the inner parts of the appliance must be carried out by professional service!

Failure to comply with the instructions of the manufacturer will lead to expiration of the right to guarantee repair!

VI. TECHNICAL DATA

Voltage (V) shown on the type label of the appliance

Input (W) shown on the type label of the appliance

Overall weight (kg) 0,44

Trimmer weight (kg) 0,13

Appliance Protection Class III.

Adapter Protection Class II.

Dimensions (H x L x W) (with a wide blade without attachments)

Noise level: Acoustic noise level of 65 db (A) re 1pW.

EC declaration on conformity was issued for the product.

Regarding EMC, the product conforms to the Council Directive No. 2004/108/EC as amended and regarding the electric safety, the product conforms to the Council Directive No. 2006/95/EC as amended.

The manufacturer reserves its right for unimportant deviations from the standard design without influence of the product function.

HOUSEHOLD USE ONLY. DO NOT IMMERSE IN WATER OR OTHER LIQUIDS. TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.

Oil: Warning, Avoid contact with eyes, Do not drink, Keep away from children or mental capabilities.

NOTICE

Close-up of a black pen tip being inserted into a clip, labeled with number 4 and letter A (no text or symbols on the object itself)

USUWANIE WŁOSÓW Z NOSA

Guarantee certificate is valid only for Czech Republic and Slovak Republic.