TRCA 108 A3 - CD Player HYUNDAI - Free user manual and instructions

Product Type	Portable CD/MP3/Radio Player
Brand	Hyundai
Model	TRCA 108 A3
Dimensions (W x H x D)	232 x 240 x 128 mm
Net Weight	1.3 kg
Power Source	AC 230 V / 50 Hz or 6 x C size batteries
Power Output	2 x 1 W
Radio Bands	AM / FM
Disc Types Supported	CD, CD-R/RW, MP3
Programmable Tracks (CD)	Up to 20 tracks
Programmable Tracks (MP3)	Up to 99 tracks
Repeat Modes	Repeat 1, Repeat Album (MP3 only), Repeat All, Random
Clock / Alarm	Yes, with snooze and sleep timer
Laser Class	Class 1
Antenna	FM wire antenna, AM ferrite antenna (built-in)
Maintenance	Clean disc if skipping; disconnect power if malfunction
User-Serviceable Parts	None; refer to qualified service personnel
Included Accessories	AC power cord
Manual Languages	CS, EN, HU, PL, SK and more

Frequently Asked Questions - TRCA 108 A3 HYUNDAI

How do I power the device?

You can power it using the detachable AC power cord connected to a 230V/50Hz wall outlet, or insert 6 x C size batteries into the battery compartment.

What disc types can I play?

The device supports standard audio CDs, CD-R/RW discs, and MP3 discs with digital audio signals.

How do I set the clock?

With the unit in standby mode, press and hold the SLEEP/TIME SET button. Adjust the time format (12H/24H), then set hours and minutes using the SKIP + or SKIP - buttons, confirming each step with SLEEP/TIME SET.

Can I program tracks in a custom order?

Yes. Press STOP first, then press MODE to enter program mode. Select tracks using SKIP and confirm with MODE. You can program up to 20 tracks for CD or 99 for MP3. Press PLAY/PAUSE to start programmed playback.

What should I do if the CD skips?

Check if the disc is dirty, scratched, or warped. Clean the disc with a soft cloth or replace it. If the problem persists, disconnect the AC cord and remove batteries, then reconnect after a few seconds.

How do I improve radio reception?

For FM, fully extend the wire antenna at the rear. For AM, rotate the unit itself to adjust the built-in ferrite antenna.

How do I set the alarm?

After setting the clock, press VOL+/AL1 or VOL-/AL2 in standby mode to enter alarm settings. Set the hour, minute, alarm source (buzzer, radio, CD, or USB), and volume. The alarm icon will appear when activated.

What is the sleep timer function?

Press and hold SLEEP/TIME SET for 3 seconds in CD mode to activate sleep. You can set the auto-off time from 10 to 90 minutes. Press repeatedly to select the desired duration or set to 'SLEEP 00' to cancel.

How do I safely dispose of the device?

Do not dispose of with household waste. Follow local recycling guidelines for electronic products and batteries. Contact your local authority or retailer for collection points.

Is the device safe to use?

Yes, it is a Class 1 laser product. However, avoid exposing it to rain or moisture, do not place naked flames on it, and ensure proper ventilation. Refer to the manual for full safety instructions.

USER MANUAL TRCA 108 A3 HYUNDAI

Black MP30 portable radio with brand logo, no visible text or symbols on device body

NÁVOD K POUŽITÍ / NÁVOD NA POUŽITIE INSTRUKCJA OBSŁUGI / INSTRUCTION MANUAL HASZNÁLATI ÚTMUTATÓ

PŘENOSNÝ PŘEHRÁVAČ MP3 A CD S RÁDIEM RENOSNÝ PREHRÁVAČ MP3 A CD S RÁDIOM PRZENOŚNY ODTWARZACZ MP3/CD/RADIO

MP3/CD/RADIO PORTABLE PLAYER HORDOZHATÓ MP3 ÉS CD LEJÁTSZÓ RÁDIÓVAL

UPOZORNĚNÍ

Diagram of a device rear panel with connected cables and battery pack (no text or symbols)

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

Diagram of a device rear panel with connected cables and battery pack (no text or symbols)

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

ETYKIETA CLASS 1 LASER PRODUCT

Wymiary / Waga (NETTO) 232x240x128 mm / 1.3 Kg

Zasilanie z sieci 230V/50Hz

Symbol of a trash bin crossed with no text or labels, accompanied by a solid black rectangle below (no text or symbols present)

1) WARNING: Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.
2) WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
3) WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
4) WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

5) Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam of laser.

6) Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

7) No naked flame sources, such as lighted candles, should be placed on the apparatus.

8) Attention should be drawn to environmental aspects of battery disposal.

9) Use of the apparatus in moderate climates.

10) The rating and marking information are located at the bottom of the unit.

11) Excessive sound pressure from earphone and headphones can cause hearing loss.

12) The mains plug of unit should be obstructed or should be easily accessed during intended use.

13) To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type

WARNING

TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

LIGHTNING FLASH WITH ARROWHEAD SYMBOL - within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

EXCLAMATION POINT - within an equilateral triangle, is used to indicate that a specific component shall be replaced only by the component specified in that documentation for safety reason.

The following label has been affixed to the unit, listing the proper procedure for working with the laser beam:

CLASS 1 LASER PRODUCT LABEL

This label is attached to the place as illustrated to inform that the apparatus contains a laser component.

WARNING LABEL INFORMING OF RADIATION

This label is placed inside the unit. As shown in the illustration.

To warn against further measures on the unit. The equipment contains a laser radiating laser rays according to the limit of laser product of class 1.

SAFETY INSTRUCTIONS

1) READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated.
2) RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference.
3) HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to.
4) FOLLOW INSTRUCTIONS - All operating instructions should be followed.
5) WATER AND MOISTURE - The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundrytub, swimming pool or in a wet basement.
6) VENTILATION - The appliance should be situated so that its location or position does not interfere with its proper ventilation. Do not place on bed, sofa, rug or similar surface that may block the ventilation openings, in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
7) HEAT - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances (including amplifiers) that produce heat.
8) POWER SOURCE - The appliance should be connected to power supply only of the type described in the operating instructions or as marked on the appliance.
9) POWER CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them.
10) POWER LINES - An outdoor antenna should be located away from power lines.
11) OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
12) ESD WARNING - The display does not function properly or no reaction to operation of any the control may due to the electrostatic discharge. Switch off and unplug the set. Reconnect after a few seconds.
13) DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified service personnel when:
a. The power-supply cord or plug has been damaged.
b. Objects have fallen into, or liquid has been spilled into the appliance enclosure.
c. The appliance has been exposed to rain.
d. The appliance has been dropped, or the enclosure damaged.
e. The appliance does not appear to operate normally.
14) SERVICING - The user should not attempt to service the appliance beyond that described in the user operating instructions. All other servicing should be referred to qualified service personnel.

Notes:

a) Dirty or scratched CD may cause a skipping problem. Clean or replace the CD.

b) If an error display or malfunction occurs, disconnect the AC cord and remove all the batteries. Then turn the power back on.

BEFORE OPERATION

Notes: CONCERNING COMPACT DISCS.

Since dirty, damaged or warped discs may damage the appliance, care should be taken of the followings items:

a) Usable compact discs. Use only compact disc with the mark shown below.

b) CD compact disc only with digital audio signals.

LOCATION OF CONTROL

POWER SOURCES

to a wall outlet to AC IN Insert 6 x "C" size batteries into the battery compartment

AC POWER

You can power your portable system by plugging the detachable AC power cord into the AC inlet atthe back of the unit and into a wall AC power outlet. Check that the rated voltage of your appliance matches your local voltage. Make sure that the AC power cord is fully inserted into the appliance.

BATTERY POWER

Insert 6 x "C" size batteries into the battery compartment. Be sure that the batteries are inserted correctly to avoid damage to the appliance. Always remove the batteries when appliance will not be used for a long period of time, as this will cause leakage to the batteries and subsequently damage to your set.

Notes:

• Use batteries of the same type. Never use different types of batteries together.
• To use the appliance with batteries, disconnect the AC power cord from it.

BASIC FUNCTION

GENERAL OPERATION

• At standby mode, press the „ST / FUNC” button to switch on the system. (FM radio mode as default mode when switch on the system.)
• Press the „ST / FUNC” button to switch the system to CD mode. (Only have Radio mode and CD mode.)
• Press and hold the „ST / FUNC” button for 3 seconds to switch off the system. (No matter in which mode.)

RADIO OPERATION

GENERAL OPERATION

1. Press the „ST / FUNC” button to select “RADIO” mode.
2. Press the "BAND / ALBUM" button to select AM or FM.
3. Adjust radio frequency to your desired station by using the "TUNING" control.

FOR BETTER RECEPTION

FM - This appliance has a FM antenna located at the rear cabinet. This wire is completely unraveled and extended for better reception.

AM - This appliance is equipped with a built-in directional ferrite AM antenna. Rotate the appliance to get better reception.

CD / MP3 OPERATION

GENERAL OPERATION

PLAY / PAUSE ▶ II Press to start playing CD / MP3 disc. Press again to stop playing CD / MP3 operation temporarily. Press again to resume playback.

SKIP + ▶▶▶I & Press to go to the next track or back to the previous track. SKIP - ◀◀◀ Press and hold while playing until you find the point of the sound.

STOP ■ Press to stop all CD / MP3 operation.

PLAYBACK

1) Press the „ST / FUNC” button to select “CD” mode.
2) Open the CD door and place a CD / MP3 disc with the label up in the CD compartment.
3) Close the CD door.
4) Focus search is performed if disc is inside. For CD disc - Total number of tracks is read and appears on the display. For MP3 disc - "MP3" appears on the display.
5) Playback will start automatically from the first track.
6) Press the "VOL + / AL1" or "VOL - / AL 2" button to adjust the volume to desired level.
7) Press the "PLAY / PAUSE" button again when you want to stop playback temporarily.
8) Press the "STOP" button when finished.

FOLDER SELECT

Press the "BAND / ALBUM" button to select folder. (Folder select function can only operate if disc store with at least 2 directories / files.)

CD / MP3 OPERATION

PROGRAM

Up to 20 tracks fo CD disc, 99 tracks of MP3 disc can be programmed for disc play in any order. Be sure to press the "STOP" button before use.1. Press the "MODE" button, the display will show "P01".

1) Press the "MODE" button, the display will show "P01".
2) Select desired track by using the "SKIP +" or "SKIP -" button. (You may select a desired album by pressing the "ALBUM" button).
3) Press the "MODE" button again to confirm desired track into the program memory.4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5) When all the desired tracks have been programmed, press the "PLAY / PAUSE" button to play the disc in the order you have programmed.
6) Press the "STOP" button twice to terminate programmed playback.

MODE

Press the "MODE" button during playing CD / MP3 disc, each press switches the mode function as follows:

1 - REPEAT 1
2 - REPEAT ALBUM (*MP3 ONLY)
3 - REPEAT ALL
4 - RANDOM
5 - NORMAL PLAYBACK

graph TD
    A["REP\nREPEAT 1"] --> B["REP ALBUM\nREPEAT ALBUM"]
    B --> C["REP ALL\nREPEAT ALL"]
    D["NORMAL PLAYBACK"] --> E["RAND\nRANDOM"]
    E --> C

OTHER FEATURES

CLOCK SETTING

1) Press and hold the "ST / FUNC" button to switch unit at standby mode.
2) Press and hold the "SLEEP / TIME SET" button to entry clock set mode. The display will show "24H" and flashing.
3) Adjust time format (12H / 24H) by pressing the "SKIP +" or "SKIP -" button.
4) Press the "SLEEP / TIME SET" button to confirm time format, display will show "AM 12:00" if 12H format is set or "0:00" if 24H is set.
5) Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "SLEEP / TIME SET" button to confirm.
6) Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "SLEEP / TIME SET" button to confirm.

Notes:

Because clock setting is at standby mode, the display is dim.

ALARM SETTING

ALARM setting must be after completed clock setting.

1) Press and hold the "ST / FUNC" button to switch unit at standby mode.
2) Press the "VOL + / AL 1" or "VOL - / AL 2" button to entry alarm set mode.
3) Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "VOL + / AL 1" or "VOL - / AL 2" button to confirm.
4) Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "VOL + / AL 1" or "VOL - / AL 2" button to confirm.
5) Pressing the "SKIP +" or "SKIP -" button to select 1, 2, 3 or 4. 1 - BUZZ 2 - RADIO 3 - CD 4 - USB
6) Press the "VOL + / AL 1" or "VOL - / AL 2" button to confirm.
7) Adjust alarm volume by pressing the "SKIP +" or "SKIP -" button, press the "VOL + / AL 1" or "VOL - / AL 2" button to confirm.
8) After confirm the alarm volume, the display will automatically scan your setting one time.
9) The display will show “①” or “②”. ALARM set complete.10. Press the “VOL + / AL 1” or “VOL - / AL 2” button to activate alarm on / off function.

Notes:

If you need to reset the alarm, press and hold the "VOL + / AL 1" or "VOL - / AL 2" button for 3 seconds to re-entry the alarm set mode.

SNOOZE

When the alarm is triggered. You may press the "SNOOZE" button to delay the alarm for another 9 minutes.

SLEEP

1) In CD mode, press and hold the „SLEEP / TIME SET” button for 3 seconds, display will show “SLEEP 90”. That means, after 90 minutes, appliance will automatically turn to standby mode.
2) Press the "SLEEP" button again to select the automatically turn off time, from 90, 80, 70, 60, 50, 40, 30, 20, 10 minutes.
3) Press the "SLEEP" button to "SLEEP 00" to cancel sleep function.

SPECIFICATION

Dimension / Weight (NET) 232x240x128 mm / 1.3 Kg

Power source 230 V/50 Hz

Power output 2 x 1W

WARNING: Do not use this product near water, in wet areas to avoid fire or injury of electric current. Always turn off the product when you don't use it or before a revision. There aren't any parts in this appliance which are reparable by consumer. Always appeal to a qualified authorized service. The product is under a dangerous tention.

Old electrical appliances, used batteries and accumulators disposal

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

This symbol appearing on the product, on the product accessories or on the product packing means that the product must not be disposed as household waste. When the product/ battery durability is over, please, deliver the product or battery (if it is enclosed) to the respective collection point, where the electrical appliances or batteries will be recycled. The places, where the used electrical appliances are collected, exist in the European Union and in other European countries as well. By proper disposal of the product you can prevent possible negative impact on environment and human health, which might otherwise occur as a consequence of improper manipulation with the product or battery/ accumulator. Recycling of materials contributes to protection of natural resources. Therefore, please, do not throw the old electrical appliances and batteries/ accumulators in the household waste. Information, where it is possible to leave the old electrical appliances for free, is provided at your local authority, at the store where you have bought the product. Information, where you can leave the batteries and accumulators for free, is provided to you at the store, at your local authority.

We reserve the right to change technical specification.

FIGYELMEZTETÉS

Diagram of a device rear panel with connected components and wiring, no text or symbols present

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)