PRO HR150-I - Pressure washer Cocraft - Free user manual and instructions
Find the device manual for free PRO HR150-I Cocraft in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pressure Washer |
| Model | PRO HR150-I |
| Brand | Cocraft |
| Power Source | Electric (230 V / 50 Hz) |
| Power Consumption | 1500 W |
| Maximum Pressure | 150 bar |
| Rated Pressure | 120 bar |
| Water Flow Rate | 480 l/h (8 l/min) |
| Maximum Inlet Water Temperature | 40 °C |
| Hose Length | 8 m |
| Power Cable Length | 5 m |
| Noise Level (LpA) | 75 dB(A) (uncertainty 3 dB) |
| Vibration Level | 2.5 m/s² (uncertainty 1.5 m/s²) |
| Weight | 12 kg |
| Dimensions (L x W x H) | 400 x 300 x 550 mm |
| Protection Class | IPX5 |
| Features | Adjustable nozzle, detergent tank (1.5 L), auto shut-off, thermal protection |
| Safety Features | Trigger lock, ground fault circuit interrupter (GFCI) |
| Maintenance | Clean filter regularly, check hose for leaks, winterize if storing below 0 °C |
| Spare Parts | Nozzles, hose, trigger gun, detergent tank available separately |
| Reparability | Repairable by qualified service center; user replaceable parts: nozzle, hose, filter |
| Warranty | 2 years (consumer use) |
Frequently Asked Questions - PRO HR150-I Cocraft
What type of detergent can I use with the Cocraft PRO HR150-I pressure washer?
You can use any biodegradable, non-flammable pressure washer detergent. Avoid using bleach or solvents as they may damage the unit. Always follow the detergent manufacturer's instructions.
How do I start the pressure washer?
Connect the water supply (make sure it's turned on and the hose has no kinks), plug the power cord into a grounded outlet, unlock the trigger gun, and press the power switch. Squeeze the trigger to release air and wait for steady pressure.
Can I use the pressure washer with a water tank?
Yes, but the water supply must have a minimum flow of 8 l/min and pressure of 1 bar. Use a pump if necessary. Never run the machine dry.
What do the different nozzle colors mean?
Typically, red (0°) for heavy cleaning, yellow (15°) for stripping, green (25°) for general washing, and white (40°) for gentle cleaning. The PRO HR150-I may come with a turbo nozzle for rotary action.
How do I store the pressure washer after use?
Turn off the water supply, disconnect the hose, and squeeze the trigger to release remaining pressure. Switch off and unplug the machine. Clean the filter and store in a frost-free area. Remove the detergent tank if not needed.
What safety precautions should I take?
Always wear safety goggles and gloves. Never point the nozzle at people or animals. Use a GFCI-protected outlet. Do not use in rain. Keep children and pets away while operating. Do not leave the machine unattended while connected.
Why is my pressure washer not building pressure?
Check that the water supply is fully open and the hose is not kinked. Ensure the inlet filter is clean. Air in the system may require bleeding by squeezing the trigger without the nozzle attached. If problem persists, check the high-pressure nozzle for blockage.
Can I use hot water with the PRO HR150-I?
The maximum inlet water temperature is 40 °C. Using hotter water may damage seals and internal components. Do not use boiling water.
How do I clean the detergent tank?
Rinse the tank with warm water after each use. For stubborn residue, use a mild detergent solution and scrub with a soft brush. Let dry completely before storing.
What spare parts are available for the Cocraft PRO HR150-I?
Common spare parts include the high-pressure hose (8m), trigger gun, nozzle set (5-in-1), detergent tank, and O-ring seals. Contact Cocraft or authorized dealers for availability.
User questions about PRO HR150-I Cocraft
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual PRO HR150-I - Cocraft and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO HR150-I by Cocraft.