KW-AVX706 - Multimedia car stereo JVC - Free user manual and instructions

USER MANUAL KW-AVX706 JVC

Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and ZT to obtain the best possible performance from the unit. Co)

PA IMPORTANT FOR LASER PRODUCTS

mm 1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

PE IS 2 ag ra How to reset your unit à How to fordbly eject a disc PF Yourpreset enr adjustments will also + be erased. THold] à _4 For security reasons, a numbered ID card + is provided with this unit, and the same ID © number is imprinted on the units chassis. Keep the card in a safe place, as it will help + 1fthis does not work, reset the unit. the authorities to identify your unit if stolen. For safety. Temperature inside the cai + Do not raise the volume level too much, as If you have parked the car for a long time in hot this will block outside sounds, making driving or cold weather, wait until the temperature in dangerous. the car becomes normal before operating the + Stop the car before performing any unit. complicated operations.

| RE T | & CR ER | | WARNINGS: To prevent accidents and damage + DO NOTinstall any unit in locations where; — itmay obstruct the steering wheel and gearshift lever operations. — it may obstruct the operation of safety devices such as air bags. — itmay obstruct visibility. DO NOT operate the unit while driving. If you need to operate the unit while driving, be sure to look head carefully. The driver must not watch the monitor while driving. Cautions on the monitor: + The monitor built in this receiver has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not malfunction. + Do not touch the surface of the liquid crystal panel directly. + Do not expose the monitor to direct sunlight. + When the temperature is very cold or very hot... - Chemical changes occur inside, causing malfunction. - Pictures may not appear clearly or may move slowly. Pictures may not be synchronized with the sound or picture quality may decline in such environments. This product incorporates copyright protection technology that is protected by US. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. CONTENTS Introduction + Before operating the uni M OPERATIONS Basic operations + Control panel + Remote controller (RM-RK240) Listening to the radio Disc operations. Dual Zone operations... SD operations.

Listening to the CD changer … Listening to the DAB tuner. Watching TV... Listening to the iPod®/D. player … Listening to other external components .…. 39 H SETTINGS Sound equalization… Assigning titles to the sources. Menu operations … Maintenance .… More about this unit Troubleshooting… Specifications. ENGLISH

MPEG4 XNo #1 DVD-R recorded in muki-border format is abo playabe (except for dual layer disc). #2 is possible to play back finalized +R/+RW (Video mode on) discs. However, the use of +R double layer iscis not recommended. = "DVD Logo” isa trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. Notice for DualDisc playback The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non- DVD side of a DualDisc on this product is not recommended. | ENOZ2-08_KW-AVXTODE tindd 4 Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

_|' mn © CR ER | | Note on Region Code: If you insert a DVD Video disc of an DVD players and DVD Video dises have incorrect Region Code their own Region Code numbers. This unit “Region Error Please Eject” appears on the can only play back DVD discs whose Region monitor. Code numbers include “2.” ENGLISH

Activate the <12Hours/24Hours> screen. Select either the 12-hour or 24-hour system.

Basic operations — control panel

Select the source. Open and dose the monitor panel. 2 TUNER — DAB —> DISC (DVD/VCD/CD) —+ SD —>CD-CH, + When the monitor panel is open, you can et] iPod, D.PLAYER, or EXT-IN —> TV —> AV-IN —> {back tothe insert a disc and an SD card. Z beginning) Change the monitor panel angle [Hold, then press]. + You cannot select these sources if they are not | a ready. Display or erase <MENU>*'. + Turn on the power. - Turn off the power [Hold]. Activate TA Standby Reception/ + Attenuate the sound (ifthe power is on). PTY Search. ner f L7/

Remote sensor —(Q ms )—— Change the display information. @ A Adjust the volume. — |

HER Reset the unit. Display window + Use only when the internal system malfunctions. + DISC: Start playing. + On menus: Enter. + TUNER/DAB: Search for stations/services. #1 MENU> screens + DISC: Select chapters/tracks. + On menus: Select items. You can use the menus to set up various settings. + iPod/D.PLAYER: Select tracks. The <MENU screen consists of + TV:Select TV stations. the following sub-menus—Setup/ Surround/Equalizer/Sound/Mode/List/ + TUNER/DAB: Select the bands. DualZone. + DISC: Stop playing. + For details, see pages 42 to 49. + On menus: Back. 7 OPERATIONS

| RE T | & CR ER | | Basic operations — remote controller (RM-RK240)

mn /astalling the lithium coin battery (CR2025) ÿ | Main elements and features

KES o\ m Before using the remote controle 2 ni + Aim the remote controller directly at the G remote sensor on the unit. 1 F , F2 + DO NOT expose the remote sensor to bright an _ light (direct sunlight or artificial lighting). ! f3] ght ( gl ghting). 1 {3 The receiver is equipped with the steering FH ; wheel remote control function. (sl is) + See the Installation/Connection Manual E {6 (separate volume) for connection. ot 7 ® MONITOR CONTROL [1 Monitor control buttons Warn + Used for a JVC monitor—KV-MR9010, To prevent accidents and damage or KV-MH6510. + Do not install any battery other than DVD/RECEIVER CONTROL CR2025 or its equivalent. [21 + Turns on the power. + Store the battery in a place where children + Attenuates the sound if the power is on. cannot reach. + Turns off the power if pressed and held + Do not recharge, short, disassemble, or {while the power is on). heat the battery or dispose of it in a fire. [31 Selects the source. + Do not leave the battery with other [41 Selects the FM/AM/DAB bands. metallic materials. [5] Changes the aspect ratio of the playback + Do not poke the battery with tweezers or pictures. similar tools. Activates or deactivates Dual Zone. + Wrap the battery with tape and insulate Adjusts the volume level. when throwing away or saving it. + Also functions as 2nd VOL when pressed with SHIFT button (#7 page 26). [8K1 + DVD/DivX 6: Shows the disc menu.

IMPORTANT: + VCD: Resumes PBC playback If Dual Zone is activated (#7 page 26), (+ page 21). the remote controller functions only for [8*1 Not used as SETUP button for this operating the DVD/CD player. receiver. Ho] SHIFT button

Et] m(stop), » (play), H (pause) H5*1 + Makes selection/settings. + > (play) also function as ZOOM button + <b: Skips back or forward by 5 minutes when pressed with SHIFT button (#7 for DivX/MPEG. ZI page 22). + DISC +/- buttons: Changes discs for a + Not applicable for CD changer operations. “CD-CH” O [22 For advanced disc operations: fi6*1 RETURN button 4

+ A/Y DVD: Selects the titles. Other dises except CD: Selects the folders. D» reverse skip/forward skip << »>: reverse search/forward search

For FM/AM/TV tuner operations: *A/Y: Changes the preset stations. + Dpt - Functions to search for stations. Press briefly: auto search Press and hold: manual search

For DAB tuner operations: # + A/Y: Changes the preset services. ed / D: - Searches for the ensembles if pressed + DVD: Selects audio language (CD) subtitles (C1), angle (Ph). + DivX: Selects audio language (D) subtitles (ED). + VCD: Selects audio channel (D ). + 2% (angle) also fanctions as SURROUND button when pressed with SHIFT button (page 23). Functions as number buttons when pressed with SHIFT button. - TUNER/DAB: Selects preset station/service. selects chapter/title/group/folder/ Functions as +10/-10/+100/-100 buttons when pressed with SHIFT button. A: Returns to the previous menu. Y : Confirms the selection and held. - Selects a service if pressed. For Apple iPod®/JVC D. player operations: + Y: Pauses/stops or resumes playback. + A: Enters the main menu (then A/V/Hd |» work as the menu selecting buttons).* 64 / wi (in menu selecting mode) - Selects an item if pressed briefly. (Then, press Y to confirm the selection.) — Skips 10 items at a time if pressed and held. Shows the on-screen bar. + Also functions as DIRECT button when pressed with SHIFT button (5 pages 20 to 22). Fa. DVD/DivX 6: Shows the disc menu. + VCD: Resumes PBC playback (5 page 21). How to select a number To select a number from 0 - 9: + +100/-100 buttons used only for searching ose Am: SN ose

To select a number greater than 9: æ © cm = L © for tracks whose number is greater than 99. LC)

_|' mn © CR ER | | Listening to the radio Preset No. Band — — PS (station name) for FM RDS. Ifno signal is coming in,

et] ii NO NAME appears.

[3] Search for a station —Auto Search. + Manual Search: Hold either to left or right until “Manual Search” appears on the display, then push it repeatedly. © + The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal © strength. When an FM stereo broadcast is hard to 4 receive! 1 L Sep | Surround © Equalizer Reception improves, but stereo effect will be Sound L Mode lost. Lt + The MO indicator lights up.

Setup To restore stereo effect, select “Off” in step 4. Surround Equalizer Sound | ENO7-14_KW-AVK7OOE_tindd_ 10 & 06216 sara pu | |

Tuning in to stations with sufficient signal strength This function works only for FM bands. Once you have activated this function (selected “Local” it always works when searching for FM stations.

Surround Equalizer Sound Mode List

Setup Surround Equalizer Sound

Only stations with sufficient signal strength will be detected. + The DX indicator goes off, then the LO indicator lights up. FM station automatic presetting —SSM (Strong-station Sequential Memory) mm This function works only for FM bands. You can preset six stations for each band.

Surround Equalizer Sound Mode List

| ENO7-14_KW-AVK7OOË find 11

Setup Surround Equalizer Sound List

ENGLISH Mono DX/Local PTy Standby Local FM stations with the strongest signals are searched and stored automatically in the FM band. Manual presetting Ex: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. Back 1 FM F2 FI AM + Each time you keep pushing up or down the knob, you can change the FM bands. + Preset List can also be accessed through <MENU> — <List> (1 page 12). 4 Select a preset number.

+ Each time you keep pushing up or down the knob, you can change the FM bands. 3 Select a preset station. + Preset List can also be accessed through <MENU> — <List>. Surround Equalizer Mode | ENO7-14_KW-AVK7OOË tindd 12 The following features are available only for FM RDS stations. Searching for FM RDS programme—PTY search You can search for your favorite programmes being broadcast by selecting the PTY code for your favorite programmes.

1 Ron ERock Music BEasy Listening ESerious Classics E Current Affairs EVaried Speech [Hold] PTY Preset List, including six preset PTY codes appears. 2 Select a PTY code.

Cultures Varied Speech Pop Music Rock Music Es) Listening + You can select one from 35 PTY codes including the first 6 preset codes which can be preset as you like (# page 13).

Fréquences change as search goes on. Ifthere is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in. Available PTY codes: News, Current Affairs, Information, Sport, Education, Drama, Cultures, Science, Varied Speech, Pop Music, Rock Music, Easy Listening, Light Classics M, Serious Classics, Other Music, Weather & Metr, Finance, Children Progs, Social Affairs, Religion, Phone In, Travel & Touring, Leisure & Hobby, Jazz Music, Country Music National Music, Oldies Music Folk Music, Documentary 06216 91:17 PM |

| RE T | © CR ER | | Storing your favorite programme types Activating/deactivating TA/PTY Standby You can store your favorite PTY codes into the Reception | PTY Preset List. ZT 1 TA Standby Reception Indicator et] O Ex “ [Hold] HCurrent Affairs Press to activate. Variod Spa nef The unit will temporarily switch | Lights up PTY Preset List appears. to Traffic Announcement (TA), if available, from any source other 2 Select a PTY code to be stored into the than AM. List. The volume changes to the preset a A TA volume level if the current nee level is lower than the preset level Varied Speech 3 Pop Muste (& page 46). re Laring Not yet activated. Tune in to Flashes x another station providing the , _. RDS signals. Current PTY Preset List is shown on the right column of the display. ©) Goes off un ps Press to deactivate. Rock Music or Speech Easy Listening ROëk Music FÉES PTY Standby Reception Indicator © Easy Listening GVaried Speech © LA Activate <MENU», then select <Mode», <PTY Standby> (#7 PTY 3 Select a listed code to be replaced with pages 14, 49). the one newly selected. ‘The unit will temporarily switch | Lights up to your favorite PTY programme from any source other than AM. D» Not yet activated. Tune in to Flashes another station providing the RDS signals. Now “Current Affairs” is replaced with To deactivate, select “Off” in step | Goes off “Science.” 4, then press ENT once (#ÿ page 14). E OPERATIONS | ENO7-14_KW-AVK7OOË tindd 13 & 06216 9:41:20 PM

Surround Equalizer Sound Mode List

Setup Surround Equalizer Sound urrent AMIS Information Sport Education Drama

S Select a PTY code for PTY Standby Reception.

Trading the same programme—Network- Tracking Reception When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals. Programme À broadcasting on different frequency areas (01-05) When shipped from the factory, Network- Tracking Reception is activated. To change the Network-Tracking Reception setting, see “AF Regional” on page 46. + When the DAB tuner is connected, refer to “Tracing the same programme— Alternative Frequency Reception (DAB AF)” on page 35. Changing alternative station — Programme Search mms Usually when you select preset stations, the preset stations in the preset numbers are tuned in. However, if a preset station is an FM RDS station, and the signals from that station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency broadcasting the same programme as the original preset station is broadcasting (# page 46). + The unit takes some time to tune in to another station using programme search. 06217 3:00:12PM |

| RE T | & CR ER | | Disc operations The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends on its internal program). ENGLISH If a disc does not have any disc menu, all tracks in it will be played repeatedly until you change the source or eject the disc. If“O” appears on the monitor, the unit cannot accept the operation you have tried to do. + In some cases, without showing “©,” operations will not be accepted. Open the itor panel and insert the disc. Playback starts automatically. To open/close the monitor panel Label side To eject the disc (Q] Do not place your finger behind the monitor panel. == DISP:Pressif no playback picture appears, but disc D information (£5 pages 16 and 17) screen is displayed. Now Reading. D: Start playback ifnecessary. (For DVD: 10-second review if pressed during play.) 15 OPERATIONS | EN15-30 KW-AVX7O0E Lindd 15 & 06216 9:3726 PM

_|' mn © CR ER | | ( + Each time you press the button, playback While playing the following discs, press (=) picture and disc information screens (withAwithout level meter) appear in turn. > Title no./Chapter no./Play time Sampling frequency/Bit rate/Recorded I [signal channels ENGLISH Audio format — Surround/ sound mode Press: Select chapter Hold: Reverse/fonward search*" Ô Press: Select title Playback mode — Speaker/signal —| indicators Ce page 51) ce CL Group no. I —— (x page 22) ] { BSP.indictor LL | (65 page 22) rack no./Playtime Press: Select track Hold: Reverse/forward search*!

| Press: Select group Ç © & UT nn EL CE, EG, CES, For DivX/MPEG: Folder no./Track no./Play time der no./Track no. Current file ER Press: Select track Next file name.avi Next fl name avi Hold: For DIVX/MPEG: Reverse/ Next file name.avi forward search*? Next file name.avi . SO Ô Press: Select folder Next ile name avi INA — Trackno./Play time PB indicator —| lights up when PBC is in use. Press: Select track GA] Hot: Reverse/fonvard search N J | EN15-0_KW-AVK7O0Ë tindd_ 16 & 06216 91:37:33 pu | |

HER Press: Select track CNED | Hold: Reverse/forward search*" Next track list (only for CD Text) + “NO NAME” appears if no title is assigned MP3/ or recorded.

es Folder no./Track no./Play time Audio format GENE Pres, Saleh : CMP3AwMañwan) (0 Next file name.mMp3 Hold: Reverse/forward search © [En] Next file name.mp3 © TRE ÎX Press: Select folder Nan name.Mp3 © Holé:_ Display Folder List + Tag data will be shown instead of folder/ file names when they are recorded (with “Tag Display” set to “On” + page 43). L J #1 Search speed: x2 = x10 #2 Search speed: D 1 D»2. + DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, inc. and are used under license. +_Official DivX® Ultra Certified product +_ Plays all versions of DivX® video (induding DivX® 6) with enhanced playback of DivX® media files and the DivX® Media Format + Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/ or other countries. 17 OPERATIONS | EN15-30_KW-AVK7O0Ë tindd 17 & 06216 2:37:36 PM

Selecting playback modes modes—Intro/Repeat/Random. Ex. To select Track Repeat

Setup Surround Equalizer Sound You can use only one ofthe following playback 3 e CR ER | |

selected, the off Intro PRepeat D Random

S]Trak __! Folder When one ofthe playback modes is corresponding indicator lights up on the disc information screen. To cancel, select “Off” in step 3 or 4. Disctype Intro Repeat Random Chapter: Repeats current chapter Title: Repeats current title Track: Repeats current track Track: Plays the first 15 seconds of each track (for VCD: PBC not in use) Track: Repeats current track {for VCD: PBC not in use) Disc: Randomly plays all tracks (for VCD: PBC not in use) Track: Plays the first 15 seconds of each track Folder: Plays the first 15 seconds of the first track of each folder Track: Repeats current track Folder: Repeats all tracks of thi current folder Folder: Randomly plays all je tracks of current folder, then tracks of next folders Disc: Randomly plays all tracks Track: Repeats current track Folder: Repeats current folder

| RE T | © CR ER | | Selecting tracks onthelist mm Prohibiting disc ejection mms If a disc includes folders, you can display the You can lock a disc in the loading slot. Folder/Track Lists, then start playback. 1 on creuse ! si Folder List with the current IHold] Track List on the right column THold] appears. à My Best ENGLISH NO EJECT?

2 Select a folder, then activate the Track “No Eject” appears. Û CD Best2 To cancel the prohibition, repeat the same procedure to select “EJECT OK”. 0 Easy Listenings

+ Preset List can also be accessed through <MENU> — <List>.

Setup Surround Equalizer Mode

Operations using the remote controller —RM-RK240

1 CsD : Stop play. ENGLISH He:

C0: En+ ©. + To select a number, see also (On) : Pause (Frame by frame playback if pressed during pause). © : Start play (10-second review if pressed during play). Reverse/forward search*!. (No sound can be heard.) (Slow motion*? during pause. No sound can be heard.) Press: Select chapter (during play or pause). Hold: Reverse/forward search* DC: Select title. Select aspect ratio. C5: Select subtitle language. Select audio language. C2: Select view angle. Select chapter (during play or pause). Select title (when not playing).

Using menu driven features... [2] Select an item you want to start play. (ess 2 |E RS |) HE) “How to select a number” on le page 9. Select title directly. ® ù 7 © (. D C= : Stop play. > CM) : Pause (Frame by frame playback if pressed Press: Select track. Hold: Reverse/fonward search*. CIC: Select group. Select aspect ratio. Select audio language. while pausing moving pictures). © © : Start play (10-second review if pressed while Select track. playing moving pictures). ee: Co Reverse/forward search*!. Select group directly.

[2] Select an item you want to start play. (ss 2 |E# |)

C=2 : Stop play. ic, qe | CD : Pause (Frame by frame playback if pressed . h ZI during pause). For 6: Using menu driven features... un © : Start play. (ol O DC: Reverse/forward search“. (No sound can [2] Select an item you want to start play. Z be heard.) eme DE : Press: Select track. BC) Hold: Reverse/forward search*’. (No While playin es) anne near) CD) : Retum/advance the scenes by 5 minutes. Select aspect ratio. Current playback position C5): Select subtitle language. (DivX only) (ER) ==] Select audio language. (DivX only) 2 —> 20 : co So 1007 1507 2000 2400 Select track (within the same folder). 2nd press Astpress 3rd press St pr me Istpress 2nd press C9: + ©..o) brectiy* (Select folder direct” . ) ([C à C=) :Stop play. H- ©... CES, Cm: Pause. Select track (within the same folder). & ©) : Start play. 7 CC : Select track. EC - 0.6 IC): Select folder. Select folder directly”. Select aspect ratio. C=D : Stop play.

: Pause (Frame by frame playback if pressed during \ EI ): pause). © : Start play. Select track. e: n During PBC playback. Reverse/forward search*! (Forward slow ne . Ode ©...® : Select an item on the menu. motion*? during pause. No sound can be . To return to the previous menus, press ÆRSS. heard.) . To cancel PBC playback + Reverse slow motion does not work. æ@. ne ° [2] While holding, press ©... ® to start the Press: Select track. desired track A 5 : Hold: Reverse/forward search*3. (No sound can + Toresume PBC, press be heard.) Select aspect ratio. : Select audio channel (ST: stereo, L: left, R: Right). #Search speed: D» 1 »» 2 »»3 *6 When 2-digit numbers are assigned at the beginning oftheir #5 Search speed D 1 = 22 folder names—01, 02, 03, and soon. 21 OPERATIONS

©=D : Stop play. <> Playing back a bonus grou CO : Pause. Ifa DVD Audio including a “bonus group” is © : Start play. detected, the BONUS indicator lights up on the CODE : Reverse/forward search”. disc information screen. CH : Press: Select track. To play abonus grou Hold: Reverse/forward search”. pay SrOUPe. ©...® : Select track. 1 Select the bonus group. L + The bonus group is usually recorded as #1 Search speed:x2 = x5 > x10 =D x20 © x60 the last group. #5 Search speed: x2 x10 2 Enter the key number. *6When 2-digi numbers are assigned at the beginning oftheir folder names—01, 02, 03, andso on. Enlarging the view (Zoom in) During moving picture playback... + “key number” (a kind of password) for the bonus group is not open to public. 4, __ æs a D The way of getting the key number depends on the disc. 3 Follow the interactive instructions 00H à shown on the monitor. JOM 5 1] : Pr ne Selecting browsable still pictus > + When a disc including browsable still pictures Movetheenlarged is detected, the B.S.P. indicator lights up on the CD portion. disc information screen. When disc shows the BSP selecting icons such While pausing... Ces, as <ort> on the screen... 1 Select an item you want to display. (ess zen /e) 2 Em To cancel zoom, select “ZOOM OFF.”

Enjoying surround sounds mm You can enjoy multi-channel surround playback through the front, center, surround speakers. + Without connecting (and activating) center speaker and surround speakers, you cannot enjoy surround playback . MULTI: For multi-channel encoded sources such as Dolby Digital’, DTS*?, and DVD Audio. (When activated, “MULTT is shown on the disc information screen.) Dolby Pro Logic I (Movie/Music}: For 2 channel sources except for DivX/MPEG 2- channel discs. (This can also be used for SD card playback. 1 page 29) To turn on the surround Surround Sound Mode List

Setup Equalizer Mode List + Surround Off + Surround On: the following steps. eactivates surround. ctivates surround —+ go to Dolby PLII Movie Dolby PLI Music Auto D] Dolby PLII Movie Dolby PLI Music Auto Dolby PLII Movie ©| Dolby PLII Music Là | EN15-30_KW-AVK7O0E tindd_ 23 e CR ER | | + Auto: “MULTT” surround is activated when multi-channel digital signals are detected. + Dolby PLII Movie: Activates Dolby Pro Logic II Movie. + Dolby PLII Music: Activates Dolby Pro Logic II Music — go to the following step. 5 Only when selecting “Dolby PLII Music” ENGLISH

CenterWidth + Panorama: Select “Panorama On” to add wraparound sound effect. + CenterWidth: Adjust the center image so it may be heard only from the center speaker, only form the left/right front speaker as a “phantom” center image, or various combination of these speakers. As the number increases, the “phantom” effect becomes stronger (normally select “4”). On the remote controller: SFR) +e F — (its D LOUE

+ You cannot change the “Dolby PL II Music” settings using the remote controller. 1 Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, MLP Losless, and the double-D symbol are trademarks of Dolby Laboratories. #2 "DTS" and DTS Digital Surround” are registered trademarks ofDigial Theater Systems, Inc.

| RE T | & CR ER | | Operations using the on-screen bar (DVD/VCD/DivX/MPEG/JPEG) mn These operations are possible on the monitor using the remote controller. Onisplay the on-screen bar (r> page 25). (twice) Osclet anitem. = là Onake a selection. If pop-up menu appears... mc 1} + For entering time/numbers, see below. ENGLISH Entering time/numbers Ex: To select a number from 0 - 9: DVD How to select a number To enter 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, 0, then ENTER.

VCD (PBC not in use) __;__ To enter 64 (minutes): 00 (seconds), press 6, 4, 0, 0, then ENTER. + Itis not required to enter tailing zeros (the last two digits in the examples above). + To correct a misentry, use CD. To remove the on-screen bar + +100/-100 buttons used only to enter the number greater than 99. + To reduce numbers, use

Above example is of DVD Video. Items shown on the bar vary due to the disc type. [1] Disctype [21 + DVD: Audio signal format + VOD: PBC [3] Playback mode DVD Video: T.RPT: Title repeat CRPT: Chapter repeat DVD Audio: Track repeat Track repeat Folder repeat Folder repeat Track repeat : Discrandom Trackintro Plays the beginning 15 seconds of the current track [4] Playback information T02-C03 Current title/chapter Current group/track Current track Current folder/track [5] Time indication Elapsed playing time of the disc Remaining title time (for DVD) Remaining disc time (for others) Elapsed playing time of the current chapter/track Remaining time ofthe current chapter/track [6] Playback status [>] Play @/© Reverse/forward search O/D Reverse/forward slow-motion o Pause Oo Stop [71 Operation icons mime Changetimeindication (see[5) @% Time Search (Enter the elapsed playing time ofthe current title or ofthe disc.) TITLEæ Title Search (by its number) GROUP Group Search (by its number) CHAPæ Chapter Search (by its number) TRACK» Track Search (by its number) RPT Repeat play*! INT Intro play*! RND Random play*! œ Change the audio language or audio channel e Change the subtitle language Ex Change the view angle #1 ve page 18.

| RE T | e Dual Zone operations You can enjoy a disc playback on the external monitor connected to the VIDEO OUT and 2nd AUDIO OUT plugs, while listening to any other source through the speakers. + When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. ENGLISH

On/Surround Of D] 0n/Surround On + Off: Deactivates Dual Zone. + On/Surround Off (DUAL): Activates Dual Zone without applying Headphone Surround”. + On/Surround On (DUAL SURR): Activates Dual Zone and applies Headphone Surround. When Dual Zone is activated, the main source is changed to “DISC.” Ex. When “On/Surround On” is selected.

| EN15-30_KW-AVK7O0E tindd_ 26 To select a different source (main source) to listen through the speakers: Press SOURCE on the control panel. + You cannot select “SD” for the main source. + By using the buttons on the control panel, you can operate the newly selected source without affecting Dual Zone (DVD/CD) operations. On the remote controller: Off DUAL (0n/Surround Off) em Lu SURR (0n/Surround On) <l 2 Adjust the volume through the 2nd AUDIO OUT plug.

3 Operate the DVD/CD player.

• JVC original headphone virtual surround system. This surround will also work for the main source “DISC” though it is activated for the sub-source. This surround does not work for DivX/MPEG discs. 06216 9:38:12PM |

to start playback. Selected playback mode Elapsed playing time of the current track (not displayed for JPEG) Operation status Current track number/total number of tracks in the current folder (total number of tracks on the disc) [8] Track information (only for MP3/WMA/ WAV) [9] Track list F0 Current track (highlighted bar) To change the playback modes You can also change the playback modes. + For CD/MP3/WMA/WAV: Intro/Repeat/ Random + For others: Repeat 2 Only for CD/MP3/WMA/WAV: Select a playback mode. To select a folder ortrack © Select “Folder” column or “Track” column 3 select your desired option. on the control screen. © © = æ 4 Es] 2° select a folder or track. + If necessary, press ENTER æ to start playback. 27 OPERATIONS

To go back to the folder list, press T Display the folder list. Each time you press the button, the list screen comes on and goes off. 2° Select a folder on the list. (æ=) æ be (sæ) The track list of the selected folder appears. 3 Select a track on the list.

æ me (m2) 06220 8:58:37 AM |

| RE T | @© SD operations

To eject the disc To open/close the O push in the SD card monitor panel Z lightly. in OPENGLOSE Caution: Do not release your finger quickly; otherwise, the SD card may pop out from the unit. L =

Press: Select track Hold: Reverse/fonward search Press: Select folder Ho: Display Folder List

{&5 page 19) This unit can play MP3/WMA/JPEG tracks You can operate the SD playback in the same stored in SD cards. way you operate the MP3/WMA/JPEG discs AI tracks in the SD card will be played (except the OSD operation and those on the repeatedly until you change the source. external monitor). + Removing the SD card will stop playback. + For general operational information, see + You cannot select “SD” when Dual Zone is in pages 15 to 23. use. Make sure all important data has been backed up. 2 OPERATIONS

Selecting playback modes modes—Intro/Repeat/Random. Ex. To select Track Repeat

Setup Surround Equalizer Sound

You can use only one ofthe following playback 3

Folder When one of the playback modes is selected, the corresponding indicator lights up on the monitor. To cancel, select “Off” in step 3 or 4. File type Intro Repeat Random Track: Plays the first 15 Track: Repeats current track | Folder: Randomly plays all seconds of each track Folder: Repeats all tracks ofthe tracks of current folder, & MP3/WMA Folder: Plays the first 15 current folder then tracks of next folders seconds of the first track of SD: Randomly plays all tracks each folder Folder: Repeats current folder JPEG | EN15-30_KW-AVK7O0E_tindd_ 30 30 MONS

_|' mn e Listening to the CD changer Trackno./Play time SCD-CH Disc Title Current track Title Next rack fi Next track title Next track title Next track title Next track title Next track title Cowon —f

Not displayed for conventional CD Co ow12 ENGLISH Press: Select track Hold: Reverse/forward search Press: Select folder (MP3 only) A Hold: Display Disc List It is recommended to use a JVC MP3-compatible CD changer with your unit. + You can play only CDs (CD-DA) and MP3 discs. Preparati Make sure “Changer” is selected for the external input setting. (25 page 47) © select ”cD-cH” @ isplay the Disc List.

+ BEST 10 + BEST JAZZ + DISC 05 Ho MSLOAT + Each time you keep pushing up or down the knob, you can display the other list of the remaining discs. + While playing an MP3 disc, you can select and start playing a track in the disc using the Lists: Display List (select the current disc) — Folder List Track List, then start playing a track you want.

TRACKO02 TRACKO03 TRACKO04 C3] Select a disc to start playing.

_|' mn © CR ER | | Selecting playback modes You can use only one ofthe following playback modes—Intro/Repeat/Random. Ex. To select Track Repeat

Surround Equalizer Sound When one of the playback modes is selected, the corresponding indicator lights up on the monitor. To cancel, select “Off” in step 3 or 4. Disctype Intro Repeat Random Track: Plays the first 15 Track: Repeats currenttrack | Disc: Randomly plays all tracks seconds of each track isc: Repeats all tracks ofthe ofthe current disc <> Disc: Plays the first 15 seconds current disc All: Randomly plays all tracks of ofthe first track of all allloaded discs & loaded discs @& Track: Plays the first 15 Track: Repeats currenttrack | Folder: Randomly plays all seconds of each track Folder: Repeats all tracks ofthe tracks of current folder,

Folder: Plays the first 15 seconds of the first track of each folder Disc: Plays the first 15 seconds ofthe first track of all loaded discs current folder Repeats all tracks ofthe current disc then tracks of next folders Disc: Randomly plays all tracks All: Randomly plays all tracks of allloaded discs To use <Mode> menu 1 above. To use <List> menu “> pages 19 and 31. List Track List Display List — Folder

| ENS1-39_KW-AVK7O0Ë tindd_ 32 You can use the following buttons on the remote controller to operate the CD changer. CD CG); Select disc. CIC : Select folder (MP3 only). CH : Select track.

| RE T | © CR ER | | Listening to the DAB tuner

• Information changes when you press DISP. While @ Select the bands. tuning in a service with DLS, the TEXT indicator AB + DAB2 — DAB5— will light up. [3] Searching for an ensemble. EC] + Manual Search: Hold either to left or right until “Manual Search” appears on the display, then & push it repeatedly. [4] Select a service (either primary or secondary) to listen to. When surrounding sounds are noisy Em 2 er Some services provide Dynamic Range Control Surround (DRC) signals together with their regular ET programme signals. DRC will reinforce the low l level sounds to improve your listening. VUS + The DRC indicator will light up while tuning 3 rs in a service with the DRC signals. 'D.Range Control (4 ‘Annouce Standby 1 rs PTy Standby |_Setup _ _| Surround 4 Equalizer

| RE T | © CR ER | | Manual presetting RE Ontheuni You can preset six DAB services (primary) for 1 BACX each band. eo = LAB => DAB2 > DAB3 7 BACK 7 1 und pr ABI->DAB2-> DAB3— 2 DAB1 Bayer 211.648MHz 108 + Each time you keep pushing up or down the knob, you can change the DAB bands. 3 Select a preset service. E Service Label No Serv. + Each time you keep pushing up or down the knob, you can change the DAB bands. + Preset List can also be accessed through <MENU> — <List> (® right). + Preset List can also be accessed through 4 Select a preset number. ù _ <MENU> — <List>. H Service Label E No Serv. Z E FFH 5 HRS G HRH Surround Equalizer Sound : Mode © DAB1 Pi Vis Bayefn" 2A1.648MHz 108 Setup Surround Equalizer Mode Selecting preset stations On the remote:

GS — Adivating/deactivating TA/PTY Standby on D 2 o + à Recprion __ __ Ci + Operations are exactly the same as explaine ‘Ses on page 13 for FM RDS stations. [Hold! + You cannot store PTY codes separately for the or DAB tuner and for the FM tuner. EsE2)

| ENS1-39_KW-AVK7OOË tindd 34 & 06216 91:30:24 pu | |

Activating/deactivating Announcement Standby Reception Announcement Standby Reception allows the receiver to switch temporarily to your favorite service (announcement type). Announcement Standby Indicator Reception Activate <MENU», then select <Mode>, <Announce Standby> (& below). The unit will temporarily switch to your favorite service from any source other than AM. Lights up Not yet activated. Tune in to Flashes another service providing the related signals. To deactivate, select “OfP’ in step 4 then press ENT once (5 below). Goes off Adtivating Announcement Standby Reception

©. TransporNews __! Warning 5 Select an announcement type for Announcement Standby Reception.

Radio Into Sports news PT Financiai nous Tracing the same programme—Alternative Frequency Reception (DAB AF) mm + While receiving a DAB service: When driving in an area where a service cannot be received, this unit automatically tunes in to another ensemble or FM RDS station, broadcasting the same programme. While receiving an FM RDS station: When driving in an area where a DAB service is broadcasting the same programme as the FM RDS station is broadcasting, this unit automatically tunes in to the DAB service. When shipped from the factory, Alternative Frequency Reception is activated. To deactivate the Alternative Frequency Reception, «pages 42, 47. EXTERNAL DEVICES

You can connect JVC'’s KV-C1001 TV Tuner Unit to the AV BUS terminal on the rear. Channel no. Assigned name appears. no name is assigned, "NO NAME" appears. POWERON *] Lx page 40. DISP: Press no playback picture appears, but source information (this) screen is displayed. © sekect'Tv” [2] Search for a station to listen—Auto Search. + Manual Search: Hold either to left or right until “Manual Search” appears on the display, then push it repeatedly. + You can also use the remote controller supplied for the TV tuner unit, but some functions may not work. (Aim it to the remote sensor of this receiver.) Presetting TV stations sm Manual presetting & Automatic Memory presettini À Select a station to preset. You can preset 12 TV stations. 1 A AVCTV L_Setup _ __!| ae Equalizer Mate 2 Display the Preset list. 2 List a. BBC ; QE rs ñ Setup ECB sen Q) k: Equalizer THold] Le] ul + Each time you keep pushing up or down mi the knob, you can change to the other page of the Preset list. + Preset List can also be accessed through <MENU> — <List> (15 page 37).

Le 3 Select a preset number. Local TV stations with the strongest signals : F 12} are searched and stored automatically. ©) sl

THold] Selecting preset stations Selecting on the Preset List

Setup Surround Equalizer Mode

+ Preset List can also be accessed through | ENS1-39_KW-AVK7O0Ë_tindd_ 37 e CR ER | | Changing on-screen information = You can display channel number and assigned name of the station while watching TV. 1 r

+ Off: No information will be displayed while watching TV. & + Channel: Channel number will be displayed while watching TV. + Channel+Station: Channel number and assigned name of the received station will be displayed while watching TV. 37 EXTERNAL DEVICES & 06220 8:59:41 AM

| RE T | & CR ER | | Listening to the iPod°/D. player

Press: Select track Hold: Reverse/forward search For Apple iPod and JVC D. player, it is required to connect the interface adapter (KS-PD100 or KS-PD500) to the CD changer jack on the rear. 4 Repeat steps 2 and 3 to select a track. + When a track is selected finally, playback starts. . + To return to the previous ment. Preparation: Make sure “iPod” or “D. player” is selected for the external input setting. (> page 47) Selecting playback modes mms © sciet'ipod”or"D. PLAYER. + When one ofthe playback modes is selected, & e Playback starts automatically. the corresponding indicator lights up on the Select a song. monitor. : 1 Display <MENU, then select <Mode> Selecting a track from the players menu mm © <Repeat> or <Random>. 1 Enter the playe”s menu. 2 Select an appropriate option. TR This mode will be canceled if no Pa e are done for about Repeat | One: Functions the same as "Repeat Secones. One” or “Repeat Mode —> 2 Select the desired menu. One.” All: Functions the same as “Repeat Press: Select an item Hold. Skip 10 items at a time if more All" or "Repeat Mode —> AIL" than 10 Random | Album: Functions the same as For iPod: “Shuffle Albums” ofthe iPod. Playlists <—> Artists <> Albums <> Songs Song/On: Functions the same as <— Genres ++ Composers <> (back to the “Shuffle Songs” or “Random beginning) Play —+ On." For D. player: Playlist <> Artist <> Album <—> Genre +> To cancel, select “Off” Track ++ (back to the beginning) :_ iPodisa trademark of Apple Computer, Inc, registered in the U.S. and other countries. 3 Confirm the selection. | EN31-39_ KW-AVX700E findd 38 & 062.16 9:39:32 pu | |

_|' mn © CR ER | | Listening to other external components AV-INPUT You can connect an external component to the LINE IN/VIDEO IN plugs.

Assigned title (sx page 41) > DISP:Press if no playback picture appears, but source information (this) screen is displayed. © select 'AV-IN.” [2] Turn on the connected component and start playing the source. If you select “Camera Reverse” for “AV Input” (# page 47), some status messages such as volume level change will not appear on the monitor while viewing the picture. EXT-INPUT @& You can connect an external component to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied). Assigned title (sx page 41) Preparation: Make sure “External Input” is selected for the external input setting. (# page 47) © select'EXT-IN.” [2] Turn on the connected component and start playing the source. 3 EXTERNAL DEVICES | ENS1-39_KW-AVK7O0Ë findd 39 & 062.16 9:30:36 PM

| RE T | © CR ER | | Sound equalization

2 power on (| Freq. 150Hz +02 Freqg. 400Hz +02 Freq. kHz 00 Freq. 2.5kHz +01 Freq. 6.3kHz +01 Freq. 15kHz +03 Selecting sound mode Storing your own adjustment You can store your adjustment into User 1, User 2, and User 3. 1 Repeat steps @ and @, then in step

3 Store. + For preset values of each sound mode, 1 page 54. + When surround (5 page 23) is activated, sound equalization is temporarily canceled.

e CR ER | | ssigning titles to the sources ENGLISH Press: Change character set Hold: Erase title You can assign titles to the following... Maximum number of Sources characters AV-INPUT Up to 16 characters. EXT-INPUT TV stations Up to 16 characters (up to 30 stations) DISC/CD-CH* Up to 32 characters (up to 30 discs)

• You can assign titles only to conventional CDs. C1] Select the sources. + For AV-IN/EXT-IN: Select the source. + For TV station: Select “TV,” then tune in to a TV station. + For a CD in this receiver: Insert a CD. + For CDs in the CD changer: Select “CD-CH,” then select a disc number. [2] Display the title entry screen. ui A Equalizer Sound Mode List

Setup Surround Equalizer Sound

Ex.: When you select “DISC” as the source | EN4O-49_KW-AVK7OOE find 41

[3] Assign a title. [1] Select a character, then enter. + To change the character set, press DISP. (For available characters, FF page 50.) [21 Repeat step [1 luntil you finish entering the title. € MY BE$! C4] Finish the procedure.

| RE T | © CR ER | | Menu operations

Fader/Balance Volume Ajust Surround Subwoofer Equalizer «| Sound Crossover Mode Q Amliier Gain + Some items require you to repeat this + Non-available items will be displayed steps to set the sub-items. being shaded.

Setup Surround Equalizer |_Sound____L Mode List

Dh Menu items | EN4O-49_KW-AVK7OOE tindd_ 42 & 062.16 91:50:26 pu | |

| RE T | © CR ER | | Initial: Underlined Selectable settings, [reference page] ZT

Off: Cancels. = On: Activates the demonstration on the monitor. 2

You can select the background picture of the monitor. Standard, Geometric Design, Sea, Simple Green, Simple Orange, Simple Red, Simple Brown, Simple Grey You can select the level meter you want. Meter 1, Meter 2, Meter 3 + Press DISP repeatedly to display the selected level meter on the monitor. Off: Cancels. Once: Scrolls the disc information once. Auto: Repeats scrolling (5-second intervals). + Holding DISP scrolls the information regardless of this setting. Off: Cancels. On: Shows the Tag data while playing MP3/WMA/WAV tracks. & Off: Cancels. & On: Activates dimmer. Auto: Dims the monitor when you turn on the headlights. Time Set: Sets the Dimmer On/Off times. You can preset the brightness for dimmer. 00 (brightest) to 10 (darkest); Initial 05 You can adjust color and brightness of the monitor. -15 (darkest) to +15 (brightest); Initial 00 You can adjust the following to make the monitor clear and legible for watching the playback picture. The settings are stored separately for each source—“DISC,” “AV-IN,” and Tv? -15 to +15; Initial 00 Bright: Adjust if the picture is too bright or too dark. Contrast: Adjust the contrast. Color: Adjust the color ofthe picture—lighter or darker. Tint: “FIX” appears. This cannot be adjusted for this model. *1_ Not adjustable for audio sources.

| RE T | & CR ER | | Selectable settings, [reference page] ZT You can change the aspect ratio of the picture. OU Aspect ratio of incoming signal = 43 16:9 Normal: Ke For 4:3 original pictures Full: S=S Ca) For 16:9 original De eO o pictures Just: lo en (°] O oO ea oo Zoom: 9] O Ô (®) LOG Auto: + For “DISC”: Aspect ratio is automatically selected to match to the incoming signals. + For the other video sources: Aspect © ratio is fixed to “NORMAL.” Initial 0:00, 5 [6] 12 Hours, 24 Hours, 1 [6] Off, Auto, «> [6] Select the initial disc menu language; Initial English (# also page 54). Select the initial audio language; Initial English (1% also page 54). Select the initial subtitle language or erase the subtitle (OFF); Initial English (FF also page 54). Select the on-screen language used for the external monitor connected to the VIDEO OUT plug: Initial English. *1_ Not adjustable for audio sources. *2 Selectable only for “DISC” or “SD” (while not playing). | EN4O-49_KW-AVK7OOE tindd_ 44 & 06216 9:50:41 pu | |

| RE T | & CR ER | | Menu items Selectable settings, [reference page] Monitor Type Select the monitor type to watch a wide screen picture on the external monitor. + 16:9 : Select when the aspect ratio of the external monitor is 16:9. :3LB [Letter Box]/4:3PS [Pan Scan]: Select when the aspect ratio of the external monitor is 4:3. Refer to the ENGLISH illustrations on the left to see how the pictures are shown Le Î on the monitor. OSD Position Select the position of the on-screen bar, [25]. Position 1 Position 2 Higher position +1: + 2: Lower position File Type Select playback file type when a disc or an SD card contains different types of files. + Audio :Plays back audio files. ure : Plays back JPEG files. + Video : Plays back DivX/MPEG files (not available for SD cards). DivXRegi:(Registration) This unit has its own Registration Code. Once you have oO) Code played back a disc in which the Registration Code recorded, this unit’s Registration Code is overwritten for copyright protection. D. (Dynamic) Range You can enjoy a powerful sound at a low volume level while Compres:(Compression)\ playing Dolby Digital software. + Auto : Select to apply the effect to multi-channel encoded software. + On: Select this to always use this function. Speaker Size”? You can adjust the speaker size setting. Selects the speaker + Front: Small, Large + Center: None, Small, Large + Rear: None, Small, Large + Sub Woofer: On, Off + Speaker size: “Large” for 13-cm diameter or more; “Small” Adjusts the speaker size for 13 em or less. Regardless of the setting above... No sound comes out of the subwoofer while playing Dolby Pro Logic II Movie or Music if the front speaker is set to “Large” No sound comes out of the center speaker when surround is deactivated. #3 Selectable only for “DISC” or “SD.”

Selectable settings, [reference page] You can adjust the output level of the activated speakers (1 see “Speaker Size” on page 45), monitoring the test tone. + Front Left/Center/Front Right/Rear Right/ Sub Woofer“/Rear Left: adjust the output level of each speaker in the range of -10dB to +10dB; Initial 00. ENGLISH + Press and hold ENT to turn on and off the test tone—Test Tone: ON, OFF. You can adjust the speaker output timing. + Front Left/Center/Front Right/Rear Right/Rear Left: adjust the speaker distance from the listening position in the range of 15 cm/6 inches to 600 cm/240 inches in 15- cm/6-inch step. [Initial: 120 em (for center speaker), 150 cm (for the other speakers)] + Press and hold DISP to change the measuring unit—em and inch. When the received signals from the current station become weak... Off: Cancels—not selectable when “DAB AF” is set to “On” AF Regional: Switches to another station broadcasting the same programme. (REG indicator lights up.) AF: Switches to another station. The programme may differ from the one currently received (AF indicator lights up), [14]. 00 to 30 or 50*5; Initial 15, & [13]. Off, On, « [14] #3 Selectable only for “DISC” or “SD.” #4 This subwoofer level setting takes effect only when surround is activated (FF also page 49). #5 Not selectable when only the front speakers are activated. #6 Depends on the amplifier gain control. | EN4O-49_KW-AVK7OOE tindd_ 46 & 062.17 3:00:58 pu | |

| RE T | & CR ER | | Menu items Selectable settings, [reference page] IF Band Width Auto: Increases the tuner selectivity to reduce interference Z noises between adjacent stations. (Stereo effect may 5 be lost.) OU

Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. DAB AF°” Off, On, r5 [35] TV Channel Area” When connecting the TV tuner unit. CCIR: Normally select this. ITALY: Select when in Italy. INDONESIA: Select when in Indonesia. AV Input You can determine the use of LINE IN and VIDEO IN plugs. Off: Select when no component is connected C'AV-IN” is skipped while selecting the source). Select when connecting an AV component such as a VCR. Select when connecting an audio component such as an MD player. Camera”: Select when connecting the rear view ® gamer. Camera Reverse"”: The mirror image of the rear view is displayed on the monitor. (The monitor on the receiver only; the normal rear view appears on the external monitor.) External Input When connecting an external component to the CD changer jack on the rear. Changer/iPod/D. player”: CD changer, iPod, or D. player 1 (31, 38] External Input: Any other than the above. ë [39] + For connecting the DAB tuner, this setting is not required. Itis automatically detected. #7 Appears only when DAB tuner is connected. *$ Appears only when TV tuner unit KV-C1001 is connected.

• Reverse lamp wire connection is required. Se Installation/Connection Manual (separate volume). The rear view through the camera appears on the monitor in “Full” aspect ratio (regardless of the aspect ratio setting) when you shift the gear to the reverse (R) position. #10 The name of the component detected through the CD changer jack is shown.

Selectable settings, [reference page] Off: Cancels. On: Activates the key-touch tone. Off: Cancels. Muting1, Muting2: Select either one which mutes the sounds while using the cellular phone. ENGLISH Off: Cancels. On: When the ignition is turned off, the lamp on the O/VATT button flashes. Select to deactivate the surround function. Select to activate the surround function. &# [23] Auto, Dolby PLII Movie, Dolby PLII Music + When you select “Dolby PLII Music,” you can adjust “Panorama” and “CenterWidth.” 15 [40] Adjust fader—speaker output balance between the front and rear speakers. + Upmost—front only + Downmost—rear only When using a two-speaker system, set the fader to the center (00). Adjust balance—speaker output balance between the left and right speakers. + Leftmost—left only + Rightmost—right only Adjust and store auto-adjustment volume level for each source, comparing to the FM volume level. The volume level will automatically increase or decrease when you change the source. + -12 to +12; Initial 00 *11 Selectable only for “DISC” and “SD.” *12 Selectable only when surround is deactivated.

| RE T | & CR ER | | Menu items Selectable settings, [reference page] Subwoofer Adjust the settings below in the submenu: ZT + Phase: Subwoofer phase. Select either “Normal” or a « Shi = Reverse,” which reproduces a better sound. O + Level*!5: Subwoofer output level. Level: -6 to +8; Initial O Z High Pass Filter Through: Select when the subwoofer is not connected. On: Select when the subwoofer is connected. Crossover Adjust the crossover frequency between the front/rear speakers and the subwoofer. 80Hz, 120Hz, 150Hz Amplifier Gain You can change the maximum volume level of this receiver. Off: Deactivates the built-in amplifier. Low Power: VOL 00 to 30 (Select this if the maximum power of the speakers is less than 50 W) High Power: VOL 00 to 50 Rear Speaker“ You can activate/deactivate the rear speakers. Off, On Mono Only for FM. (Off, On), 15 [10] PTy Standby Only for FM/DAB. (Off, News), 15 [13, 34] ® + When you activate PTY Standby Reception, you can change the PTY code for PTY Standby Reception. DX / Local Only for FM. (DX, Local), 1 [11] ssm Only for FM.F# [11] Title Entry Only for conventional CDs, TV stations, AV-IN, and EXT-IN.1# [41] Off/Intro/Repeat/Random. Only for disc playback, SD playback, and iPod/D. player. “ [18, 32, 38] D:(Dynamic)RangeÇControl\ Only for DAB. (Off, 1, 2, 3), 15 [33] Announce Standby Only for DAB. (Off, TransportNews), 15 [35] osp Only for TV. (Off, Channel, Channel+Station), :# [37] Auto MEMORY Only for TV.1# [36] The accessible lists differ depending on the sources. Off, On/Surround Off, On/Surround On, 1 [26] #13 This subwoofer level setting take effects only when surround is deactivated (“also page 46). #4 Functions only when Dual Zone is activated. #5 Items listed under <Mode> vary among the playback sources.

Maintenance M Moisture condensation Moisture may condense on the lens inside the DVD/CD player in the following cases: + After starting the heater in the car. + Ifit becomes very humid inside the car. Should this occur, the DVD/CD player may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates. DM How to handle discs When removing a disc from Center holder its case, press down the center holder of the case and lift the dise out, holding it by the edges. + Always hold the disc by the edges. Do not touch its recording surface. When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up). + Make sure to store discs into the cases after use. I Tokeepdiscs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line | | from center to edge. + Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs. M Toplaynew discs New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the disc. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc. Do not use the following discs: Warped disc <> Sticker Æ Sticker residue $ DE Stick-on label

D Characters shown on the monitor In addition to the roman

| RE T | @© More about this unit M General Tuning on the power + By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback starts. Watching picture + If you change the aspect ratio to “Just,” both sides of the picture are extended horizontally to fit the picture to the monitor size. It may cause the center portion of the picture to look distorted. + When SSM is over, received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency). D Disc General + In this manual, words “track” and “file” are interchangeably used. + This unit can also play back 8 cm discs. This unit can only play back audio CD (CD-DA) files if different type of files are recorded in the same disc. This unit can display only one-byte characters. No other characters can be correctly displayed. s inserted upside down, “Disc Error Please Eject” appears on the monitor. Eject the disc. Ejecting a disc + Ifthe ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Disc will not play this time.) Speaker/sign icators Speakerindicators Signal indicators LCR LCR LFE LS RS LS S RS Normally, Standby Reception indicators light up instead of the speaker/signal indicators. The speaker indicators—squares around “L,” “R,”"'LS,” and “RS” lights in light blue, when the corresponding speakers are set to “Large” or “Small” (“+ page 45). The center speaker indicator—square around “C” lights in light blue, when the center speaker is set to “Large” or “Small” and when surround is activated. Sounds come out of the speakers whose speaker indicators are lit on the monitor. The SW indicator lights up when “Sub Woofer” is set to “On” (## page 45). The signal indicators indicate the incoming signals—L (front left) / R (front right) / C (center) / LFE (low frequency effect) / LS (left surround) / RS (right surround) / S (monaural surround). Ifthe speaker is activated, but the signals corresponding to the speaker are not coming in, the signal indicators changes their color from white to black to indicate no signals coming in (therefore no sound comes through the corresponding speakers). Changing the source + If you change the source with Dual Zone deactivated, playback also stops without ejecting the disc. Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously. ENGLISH

ENGLISH Playing Recordable/Rewritable discs + This unit can recognize a total of 3 500 files and 250 folders (a maximum of 999 files per folder). + Use only “finalized” discs. + This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing. + This unit can show the Tag data (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for the files. + This unit may be unable to play back some discs or files due to their characteristics or recording conditions. Playing DivX files + This unit can play back DivX files with the extension code <.divx>, <.div>, <avi> (regardless of the letter case—upper/lower). + This unit supports the DivX files whose resolution is 720 x 576 pixels or less. + This unit supports DivX 6.x, 5.x, 4.x, and 3.11. + Audio stream should conform to MP3 or Dolby Digital. + This unit does not support GMC (Global Motion Compression). + The file encoded in the interlaced scanning mode may not be played back correctly. + This unit can recognize a total 25 characters for file/folder names. Playing MPEG files + This unit can play back MPEG files with the extension code <.mpg> or <.mpeg>. + The stream format should conform to MPEG system/program stream. + The file format should be MP@ML (Main Profile at Main Level)/SP@ML (Simple Profile at Main Level) /MP@LL (Main Profile at Low Level). + Audio streams should conform to MPEGI Audio Layer-2. Playing JPEG files + Itis recommended that you record a file at 640 x 480 resolution. + This unit can play back baseline JPEG files. Progressive JPEG files or lossless JPEG files cannot be played. Playing MP3/WMA/WAV files + This unit can play back files with the extension code <.mp3>, <wma», or <.wav> (regardless of the letter case—upper/lower). This unit can play back the files meeting the conditions below: - Bit rate: MP3/WMA: 32 kbps — 320 kbps - Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG2) 48 kHz, 44.1 kHz, 32 kHz (for WMA)

This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in elapsed time indication. This unit cannot play back the following files: -MP3 files encoded with MP3i and MP3 PRO format. -MP3 files encoded with Layer 1/2. - WMA files encoded with lossless, professional, and voice format. - WMA files which are not based upon Windows Media® Audio. - WMA files copy-protected with DRM. - Files which have the data such as AIFF, ATRAC3, etc.

Enjoying surround sounds If “Surround On” is selected, “MULTI” surround playback automatically starts for multi-channel encoded discs regardless of the “Surround On” setting. You cannot activate surround for MPEG multi-channel DVD Video, DivX 2-channel and MPEG 2-channel sources. If “Surround On’ is selected, stereo sounds are emitted only through the front speakers. “FRONT 2CH” appears on the disc information screen. With “Auto” selected for “Surround On,” stereo playback will start for DVD, DTS-CD, DivX, and MPEG 2-channel sources without surround signal encoded. In this case, no sound comes out of the subwoofer. When “FIX” appears on the disc information screen, no sound comes out of the subwoofer. D Playing SD cards + The required recording format is FAT 16/32 and the recommended storage type is 8 MB to 512 MB. M Title assignment + If you try to assign titles to more than 30 TV stations or 30 CDs, “NAME FULL” flashes for a while. Delete unwanted titles before assignment. + Titles assigned to CDs in the CD changer can also be shown if you play back the dises in the built-in DVD/CD player and vice versa. D DABtuner + Only the primary DAB service can be preset even when you store a secondary service. | ENSO-54_ KW-AVX7O0E ind 53 © CR RER | D iPod°or D. player operations + When you turn on this unit, the iPod or D. player is charged through this unit. + The text information may not be displayed correctly. This unit can display up to 40 characters. Notic When operating an iPod or a D. player, some operations may not be performed correctly or as intended. In this case, visit the following JVC web sil For iPod users: <http://www.jvc.co.jp/ english/car/support/ks-pd100/index.html> For D. player users: <http://Awww.jve.co.jp/ english/car/support/ks-pd500/index.html> M Menusettings + If you change the “Amplifier Gain” setting from “High Power” to “Low Power” while the volume level is set higher than “30,” the unit automatically changes the volume level to “VOL 30.” After you change any of “Menu Language/ Audio Language/Subtitle” settings, turn off then on the power, and re-insert the disc (or insert another disc) so that your setting takes effect. When you select “16:9” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width. Even if “4:3 PS” is selected, the screen size may become “4:3 LB” for some discs. When selecting “None” for the center/rear speakers and “Off” for subwoofer (Speaker Size), surround setting is canceled and cannot be adjusted. Center speaker size cannot be set to “Large” if both the front and rear speakers are set to “None” or “Small.”

Rx: | Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service ENGLISH center. Symptoms Remedies/Causes + No sound comes out ofthe center speaker. Center speaker is used only for surround playback. No sound comes out for stereo playback. + No sound comes out ofthe subwoofer while This happens while playing some discs with “Auto” selected playing in stereo. for "Surround On” (“> pages 23 and 48). Cancel surround. + The monitor is not clear and legible for Sunshine from the windshield may cause this symptom. watching the playback picture. Adjust “Bright” and “Contrast” of “Screen Control.” («5 page 43). gs: Remote controller does not work. Deactivate Dual Zone (# page 26). 2 {While Dual Zone is activated, the remote controller only & functions for operating the DVD/CD player.) + “Position Error Push Open Key” appears on the | The monitor panel angle has been forcibly adjusted, or monitor. interrupted while opening or closing. Press OPEN/CLOSE. + “Mecha Error Push Reset” appears on the Reset the unit (157 page 2). monitor, and the panel does not move. & + "SD Loading Error” appears on the monitor. SD is not inserted fully. Fully insert it into the slot to close Ld the monitor panel. + The unit does not work at all. Reset the unit (#5 page 2). E : SSM automatic presetting does not work. Store stations manually. È + Staticnoise while listening to the radio. Connect the aerial firmly. + Disc can be neither recognized nor played . Eject the disc forcibly (“> page 2). + Disc cannot be ejected. Unlock the disc (#7 page 19). + Recordable/Rewritable discs cannotbe played + Insert a finalized disc. back. + Finalize the discs with the component which you used for + Tracks on the Recordable/Rewritable discs recording. cannot be skipped. Ë + “Disc Error Please Eject” appears on the Insert the disc correctly again. 2 monitor. © + “Eject Error” or “Loading Error’ appears on the Changing the source by pressing SOURCE will solve this 2 monitor. error. or distorted. Sound and pictures are sometimes interrupted + Stop playback while driving on rough roads. + Change the disc. No playback picture appears on the monitor. Parking brake wire is not connected properly. (25 Installation/Connection Manual.) monitor when you insert a DVD Video. “Region Error Please Eject” appears on the Region code is not correct (#5 page 5). | ENSS-59_KW-AVX7O0E ind 55

| ENSS-59_KW-AVX7O0E_Lindd 56 ENGLISH Symptoms Remedies/Causes Disc cannot be played back. + Change the disc. + Record the tracks using a compliant application in the “Reset 08” appears on the monitor. + appropriate discs (#5 page 4). £ + Add appropriate extension codes to the file names. £ + Noise is generated. The track played back is not a playable file format. Skip to = another file. È + Tracks cannot playback as you have intended Playback order may differs from the one played back using £ them to play. other players. g Elapsed playing time is not correct. This sometimes occurs during playback. This is caused by = how the tracks are recorded. + “Disc No Files Please Eject” appears on the Insert a disc that contains tracks of proper formats. monitor. + Noise is generated. The track played back is not a playable file format. Skip to another file. + Tracks cannot playback as you have intended | Playback order may differs from the one played back using them to play. other players. ee: “Now Reading” keeps flashing on the + Readout time varies depending on the SD card. #& monitor. + Do not use too many hierarchy and folders. É +_ Turn offthe power then on again. E + “SD No Files Please Eject” appears on the Insert an SD card that contains tracks encoded in an monitor, then returns to the previous source. appropriate format. 4 + “Not Support’ appears on the monitor and Track is unplayable. track is skipped. + "SD Error Please Eject” appears on the + SD card may be malfunctioning, or may not have been monitor, then returns to the previous source. formatted correctiy. + Do not pull out or attach the SD card while "Now Reading” is shown. + “No Disc” appears on the monitor. Insert a disc into the magazine. F + “No Magazine” appears on the monitor. Insert the magazine. s° “No Files” appears on the monitor. Disc does not include playable files. Replace the disc with S playable files.

Rx: | Symptoms Remedies/Causes monitor. “Reset 01” — “Reset 07” appears on the Press the reset button ofthe CD changer. The CD changer does not work at all. CD changer Reset the unit (#5 page 2). ENGLISH TV tuner unit does not work at all. Press the reset button ofthe TV tuner unit. 5 + "Reset 08” appears on the monitor. This unit is not connected to the TV tuner unit correctly. = Connectit correctly then press the reset button ofthe TV Ê tuner unit. + TVstations cannot be received. “TV Channel Area” setting is not correct (#7 page 47). + “No DAB Signal” appears on the monitor. Move to an area with stronger signals. 2%. * ‘Reset O8” appears on the monitor. Connect this unit and the DAB tuner correctly, then reset the E unit (> page 2). 2 + The DAB tuner does not work at all. Reconnect this unit and the DAB tuner correctly. Then, reset the unit (#5 page 2). “’Antenna Power NG” appears on the monitor. Check the cords and connections. not work. TheiPod or D. player does not turn on or does + Checkthe connecting cable and its connection. + Charge the battery. - For D. player: Update the firmware version. The sound is distorted.

Deactivate the equalizer either on this unit or the iPod/ D. player. “Disconnect” appears on the monitor. Check the connecting cable and its connection. For iPod: Playback stops. The headphones are disconnected during playback. Restart playback. iPod nano. No sound can be heard when connecting an Disconnect the headphones from the iPod nano. No sound can be heard. connecting à D. player. “ERROR 01” appears on the monitor when Disconnect the adapter from the D. player. Then, connect it again. iPod/D. player playback monitor. + "NO FILES” or “NO TRACK” appears on the No tracks are stored. Import tracks to the iPod or D. player. monitor. “RESET 01” — "RESET 07” appears on the Disconnect the adapter from both this unit and iPod/D. player. Then, connect it again. “RESET 08” appears on the monitor. Check the connection between the adapter and this unit. after disconnecting from this unit. TheiPod's or D. players controls do not work Reset the iPod or D. player. “No Signal” appears on the monitor. AV-IN - Turn on the video componentifit is not on. + This unit is not connected to the video component correctly. Connect it correctly. | ENSS-59_KW-AVX7O0E_Lindd 57

2 Maximum Power Output: | Front/Rear: 50 W per channel et] Continuous Power Output | Front/Rear: 20 W per channel into 4 0, 40 Hzto Z (RMS): 20 000 Hz at no more than 0.8% total harmonic distortion Load Impedance: 40 (40 to 8 0 allowance) Equalizer Control Range: | Frequencies: 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.5 kHz,

ë Level: #10d8 n Signal-to-Noise Ratio: 70 dB = Audio Output Level Line-Out Level/Impedance: 2.5 V/20 KQ load (full scale) {F-OUT/R-OUT/CENTER/ | Output Impedance: 1k0 SUBWOOFER): Color System: PAL Video Output (composite): 1 Vp-p/75 Q Other Terminals: Input: LINE IN, VIDEO IN, Aerial input Output: 2nd AUDIO OUT Others: CD changer, AV BUS & Frequency Range: FM: 87.5 MHz to 108.0 MHz 7 AM: (MW) 522 kHz to 1 620 kHz {LW) 144 kHz to 279 kHz = FM Tuner Usable Sensitivity: 11.3 dBf (1.0 uV/75 0) 2 50 dB Quieting Sensitivity: 163 dBf (1.8 uV/75 0) = Alternate Channel Selectivity 65 dB = (400 kHz): = Frequency Response: 40 Hz to 15 000 Hz Stereo Separation: 35 dB MW Tuner Sensitivity/Selectivity: 20 pV/35 dB LW Tuner Sensitivity: SOuV

Signal Detection System: | Non-contact optical pickup (semiconductor laser) Frequency Response: DVD, fs=48 kHz: 16 Hzto 22 000 Hz TI e DVD, fs=96 kHz: 16 Hz to 44 000 Hz 2 S VCD/CD: 16 Hz to 20 000 Hz 2 ° Dynamic Range: 93 dB mi Signal-to-Noise Ratio: 95 dB Wow and Flutter: Less than measurable limit Screen Size: 6.5 inch wide liquid crystal display Number of Pixel: 280 800 pixels: 400 (horizontal) x 3 x 234 (vertical) æ Drive Method: TFT (Thin Film Transistor) active matrix format = Color System: PAL/NTSC = | Aspect Ratio: 16:9 (wide) Allowable Storage Temperature: —10Cto +60°C Allowable Operating Temperature: 0°Cto +40°C Power Requirement: Operating Voltage: DC14.4V (11 V to 16 Vallowance) Grounding System: Negative ground ba E Allowable Operating Temperature: 0°Cto +40°C £ Dimensions (W x H x D}: | Installation Size (approx.): 178 mm X 100 mm x 160 mm Panel Size (approx.): 170 mm x 93 mm x 29 mm Mass (approx.): 2.6kg (excluding accessories) Design and specifications are subject to change without notice. Required space for the monitor ejection CAUTION: When cjecting the monitor, ll keep an open space for the monitor to come out. If not, the monitor may EL ke obstruct the steering wheel and gearshift lever operations, as this may result in a [ traffic accident. Unie

LC FMI> FM > FM > AM

Surround Equalizer Sound Mode List

Setup Surround Equalizer Sound

Surround Equalizer Sound Mode List

| GE07-14 KW-AVX7O0[EJLindd 11

Setup Surround Equalizer Sound List

Surround Equalizer Sound Mode List

Setup Surround Equalizer Sound urrent AMIS Information Sport Education Drama

| RE T | © CR ER | |

| RRRRRRN | & CHR DEN |

Surround Equalizer Sound Mode List

AT” urroun © Equalizer Sound Mode List

Setup Surround Equalizer Sound

Setup Surround Equalizer Mode List

Current Affairs Information Sport Education Drama

Surround Equalizer Sound Mode List

Setup Surround Equalizer Mode

Setup Surround Equalizer Sound List

vie DAB1 < Paz Bayefn" [Maintenez pressée]

Setup Surround Equalizer Sound List

© List : [on © Auto MEMORY Title Entry

Setup Surround Equalizer Mode

Surround Equalizer Sound Mode List

Setup Surround Equalizer Sound

Intro Repeat Random D [Title Entry >

Setup Surround Equalizer Sound List

Surround Equalizer Sound Mode List

Setup Surround Equalizer Mode | List ___L

Setup Surround Equalizer Sound List

Setup Surround Equalizer Sound

| RE T | © CR ER | | Menu-bediening