IAN 61859 - Power outlet POWERFIX - Free user manual and instructions

Product Type	Digital Master-Slave Extension Lead
Model	MB-3070-14-A (DE 3857)
Brand	POWERFIX
Input Voltage	230 V ~, 50 Hz
Max. Permitted Load	16 A, 3680 W
Power Consumption (Standby)	< 0.7 W
Switching Threshold Range	Approx. 5 - 100 W
Surge Protection	Yes, SPD Type 3 per EN 61643-11:2002+A11:2007
Surge Protection Ratings	Uc = 250 V~, L-N: Uoc = 10 kV / Up = 1.5 kV; L/N-PE: Uoc = 10 kV / Up = 1.5 kV
Total Number of Sockets	7 (2 permanent, 4 slave, 1 master)
Master Socket	1 socket - controls slave sockets when master appliance is on/off
Slave Sockets	4 sockets - automatically switched with master
Permanent Sockets	2 sockets - always on when strip is on
Learn Button	Yes, for setting switching threshold
ON/OFF Switch	Yes, with LED indicator
LED Indicators	Slave sockets on, Surge protector on
Functions	Master-slave auto switching, permanent mode, surge protection
Cleaning	Use a soft cloth; avoid liquids and solvents
Safety Features	Overload protection, surge protection, do not use outdoors
Warranty	3 years
Intended Use	Indoor dry environments, consumer electronics

Frequently Asked Questions - IAN 61859 POWERFIX

How do I set up the master-slave function?

Connect the master appliance (e.g., computer) to the master socket and slave appliances to slave sockets. Switch the master appliance off or to standby. Press the learn button with a pointed object until the slave LED flashes. The strip automatically stores the standby consumption. Then switch the master on/off to control slaves.

Can I use all sockets as permanent sockets?

Yes. Press the learn button until the slave LED flashes, then press it again for 3 seconds. The master and slave sockets then behave as permanent sockets. To revert, repeat the learn procedure.

What does the surge protector LED indicate?

The LED (protection on) illuminates when the strip is on, indicating the surge protector is active. If it does not light, the protector is faulty and the strip must be disposed of.

What is the maximum load for this power strip?

The maximum load is 16 A or 3680 W at 230 V. Do not exceed this to avoid overheating.

How do I clean the power strip?

Unplug the strip from the mains. Use a soft, dry cloth to wipe the housing. Do not use liquids, solvents, or petroleum-based cleaners.

What should I do if the master-slave function does not work?

Ensure the strip is switched on and the master appliance consumes between 5 W (on) and 100 W (standby). Re-run the learn procedure. If problems persist, the strip may be defective.

Is this power strip suitable for outdoor use?

No. It is designed for dry indoor environments only. Never expose to rain or moisture.

How long is the warranty?

The warranty is 3 years from the date of purchase. Keep your receipt as proof. It covers material and workmanship faults.

Can I connect multiple power strips together?

No. Never connect multiple power strips in a row, as this can cause overloading and fire hazard.

What is the purpose of the learn button?

The learn button allows the strip to automatically detect the standby power consumption of the master appliance, setting the correct switching threshold (5-100 W) for the slave sockets.

USER MANUAL IAN 61859 POWERFIX

Utilizar as tomadas Master /

Description of parts......Page 36

Technical data......Page 37

Scope of delivery ......Page 37

Safety Notice......Page 37

Getting started

Connecting electrical appliances......Page 39

Using permanent sockets......Page 40

Master / slave socket function ......Page 40

Using the master / slave sockets

as permanent sockets......Page 41

Surge protector......Page 42

Cleaning Page 42

Guarantee and service

Guarantee......Page 43

Service address Page 43

Declaration of conformity....Page 43

Manufacturer Page 44

35 GB

Introduction

Digital Master-Slave Extension Lead

- Introduction

Familiarize yourself with the product before putting it into service. Carefully read the following operating instructions

and safety notices. Use the device only as described and only for the areas listed. Keep this manual. If you give the device to a third party, make sure to transfer all of the documentation with the device.

Normal Use

The appliance is intended to be a multiple socket for use in dry indoor environments. The appliance has 2 permanent, 4 slave and 1 master socket(s). The appliance plugged into the master socket (e.g. computer) automatically switches the electrical power supply of the slave sockets (e.g. monitor, printer, scanner, etc.) on and off, too. In addition, the appliance is equipped with a surge protector. Other uses of or changes to the appliance are regarded as not in accordance with regulations and harbour considerable risks of accident. The manufacturer does not assume any liability for damage arising from improper use. The appliance is not intended for commercial use.

• Description of parts

1 Slave sockets
2 Master socket
3 Permanent sockets
4 Learn button
5 ON/OFF switch
6 LED slave sockets
7 LED surge protector

Introduction / Safety Notice

- Technical data

Type: MB-3070-14-A

DE 3857

Input voltage: 230V \~, 50Hz

Max. permitted load: 16 A, 3680 W

Power consumption

of device: < 0.7 W

Span of switching

threshold: approx. 5-100W

Surge protector: EN 61643-11:2002+

A11:2007

SPD Type 3

UC = 250 V\~ 50 Hz

L-N: Uoc = 10 kV/

Up = 1.5 kV

L/N-PE: Uoc = 10kV/

Up = 1.5 kV

- Scope of delivery

1 Master / Slave Extension Lead

1 Directions for use

SafetyNotice

WARNING! Please read all safety notices and instructions. Failure to observe the safety notices and instructions can cause electric shock, fire and / or severe injuries.

KEEP ALL SAFETY NOTICES AND INSTRUCTIONS FOR FUTURE REFERENCE!

Avoid electric shock hazard! Extremely Dangerous!

Before you use it, always check the integrity of the multiple outlet strip as well as the appliances you wish to connect to it. Damaged electrical appliances as well as bent mains cables or bare wires increase the risk of an electric shock.

37 GB

Safety Notice

• Do not use the device if the power cord or the plug of the product itself or the electrical devices to be tested are damaged.
  ■ CAUTION! Damaged power cords present a potentially lethal hazard of electrical shock.
  ■ Completely unwind the power cord. Crimped power cords increase the risk of electric shock.
  The device's plug must fit in the electrical outlet. The electrical plug may not be modified in any way. Do not use a plug adapter with grounded electrical devices. Unaltered power plugs and correct electrical outlets reduce the risk of electrical shock.
• Avoid directly touching grounded surfaces, such as pipes, heating units, stoves and refrigerators. If your body is grounded, this increases the risk of electrical shock.
• Keep the device away from rain or moisture. If water gets into the device, this will increase the risk of electrical shock.
  ■ Only use the device while wearing dry clothing and preferably shoes with rubber soles or on an insulating mat.
  ■ Under no circumstances are you to open the housing of the device. The device, power cord and plug should be repaired immediately if they are damaged or do not function properly and only by a qualified technician.
  ■ Never use the device outdoors.
  ■ Always use the mains plug and not the mains cable to unplug the connected electrical appliances.
  Pull the device's plug out of the electrical outlet when you are no longer using it.

Avoid injuries and damage to the product!

WARNING! POTENTIALLY LETHAL RISK OF ACCIDENT FOR INFANTS AND CHILDREN!

Never leave children unattended with packaging materials or the product. The packaging material presents an asphyxiation hazard

Safety Notice / Getting started

and potentially lethal risk of electrical shock and / or strangulation. Children often underestimate dangers. Keep children away from the product.

CAUTION! DANGER OF

EXPLOSION! Never use the device in a location where there is

a high risk of explosion due to the presence of flammable liquids or gases. Never exceed maximum input voltage.

■ Avoid strong vibrations.
- Do not expose the device to extreme temperatures, extreme sun light, humidity or moisture.
Do not expose the device to any extreme variations in temperature. Use only when it has adjusted to the ambient temperature.
- Do not use the device in the vicinity of strong magnetic fields such as motors, transformers, etc.
■ Never connect multiple power strips in a row.
Only use the device in buildings that are equipped in compliance with Installation Class II according to IEC664. Maximum peak voltage may not exceed 2.500 V\~. The main power supply for residential buildings normally belongs to Installation Class II.
■ Always place the power strip so that you can easily reach the main power outlet.
■ Never operate the appliance when it is covered up.

- Getting started

- Connecting electrical appliances

☐ Insert the mains plug of the multiple power strip into a correctly installed socket.
☐ Insert the electrical appliance you wish to use into the respective socket 1, 2 or 3.

Getting started

• Using permanent sockets

Note: When the multiple outlet strip is switched on, the permanent sockets 3 will be permanently switched on.

☐ Use the ON / OFF switch 5 to switch the multiple outlet strip and the connected electrical appliances on or off.

Note: When the multiple outlet strip is switched on, the ON / OFF switch 5 will glow.

- Master / slave socket function

Note: The appliance plugged into the socket 2 (e.g. computer) automatically switches the electrical power supply of the slave sockets 1 (e.g. monitor, printer, scanner, etc.) on and off along with it.

Using the automatic switching threshold setting

☐ Use the ON / OFF switch 5 to switch the multiple outlet strip on.

Note: When the multiple outlet strip is switched on, the ON / OFF switch 5 will glow.

☐ Plug the electrical appliance you wish to use into the master socket 2.

☐ Switch the appliance plugged into the master socket 2 off or into standby mode.

Note: The power consumption of the master appliance has to be more than 5 W in its switched on state and less than 100 W in its switched off state (standby mode).

☐ Press the learn button 4 with a pointed object (e.g. pencil) as long as necessary until the LED (slave sockets on) 6 starts to flash.

☐ The LED (slave sockets on) ☐ will flash for a few seconds. The multiple outlet strip will now automatically determine the standby electrical power consumption of the electrical appliance plugged into the master socket ☐. The switching threshold will be stored.

☐ The LED (slave sockets on) 6 will go out as soon as the adjustment procedure has finished.

40 GB

Getting started

☐ The master / slave socket function can now be used.

Using the master / slave socket function:

Note: Please note that the Multiple outlet strip has to be switched on for the function to work.

Note: Please note that you first have to set the automatic switching threshold setting in order to use this function (see section entitled "Using the automatic switching threshold setting").

□ Plug the electrical appliances you wish to use into the slave sockets 1.

Now switch the electrical appliance that has been plugged into the master socket 2 on or off on the appliance itself in order to switch the electrical appliances plugged into the slave sockets 1 on or off, too.

- Using the master / slave sockets as permanent sockets

Note: You can also use the master 2 and slave sockets 1 as permanent sockets 3.

☐ Use the ON / OFF switch 5 to switch the multiple outlet strip on.

Note: When the multiple outlet strip is switched on, the ON / OFF switch 5 will glow.

☐ Press the learn button 4 with a pointed object (e.g. pencil) as long as necessary until the LED (slave sockets on) 6 starts to flash.

☐ While it is flashing, press the learn button 4 with a pointed object (e.g. pencil) again for around 3 seconds.

☐ Permanent mode is now on.

☐ You can now use the master 2 and slave sockets 1 as permanent sockets 3 (see section entitled "Using the permanent sockets").

☐ Follow the instructions of the section entitled "Using the automatic switching threshold" to activate the master / slave function again.

Getting started/Cleaning/Disposal

- Surge protector

The integrated surge protector prevents the plugged-in electrical appliances from being damaged by voltage peaks in the mains supply (e.g. indirect bolts of lightning).

• After switching the multiple outlet strip, the LED (protection on) 7 will come on. The surge protector is now on.
• If the LED (protection on) 7 does not come on, then the surge protector is faulty. The sockets are dead and the multiple outlet strip has to be disposed of.

- Cleaning

Before cleaning, always remove the multiple outlet strip from the socket and all mains plugs from the appliance.
☐ Ensure that no liquids get into the inside of the device. Use a soft cloth to clean the housing. Never use petroleum, solvents or cleaners which corrode plastics.

- Disposal

Electrical appliances must not be disposed of with domestic waste.

In accordance with Council Directive 2002 / 96 / EC on waste electrical and electronic equipment (WEEE), used electrical appliances, lighting equipment and batteries have to be collected separately and recycled in an environmentally friendly way. Enquire at your city council or local government regarding the possibilities of disposing of electronic waste in a correct and environmentally friendly way.

● Guarantee and service

• Guarantee

This appliance comes with a 3-year guarantee commencing on the date of purchase. Please keep your receipt as proof of purchase. The appliance has been produced to the highest standards and thoroughly checked before dispatch. The guarantee only applies to faults in materials or workmanship when used properly. The guarantee lapses in cases of unauthorized tampering. This guarantee does not restrict your legal rights. If you wish to make a claim under the guarantee, please telephone the service centre. Only by doing so can we ensure that your appliance is returned free of charge.

- Service address

BAT

Lindenstraße 35

72074 Tübingen

Germany

E-mail: [e-mail]

For further information, we recommend you visit the service / FAQs section of our home page www.dvw-service.com

Service Tel.: [phone] - 720 741

(14 cents a minute from a German landline phone; mobile phones will be charged a max. rate of 42 cents a minute)

● Declaration of conformity

The CE mark has been affixed in compliance with the following European directives: 2006/95/EC Low voltage directive 2004/108/EC EMC Directive. The declaration of conformity is deposited at the manufacturer.

Color palette bar with grayscale shades and a central crosshair symbol (no text or labels)

Guarantee and service

Manufacturer

BAT

Lindenstraße 35

72074 Tübingen

Germany

44 GB

Einleitung

L/N-PE: U_oc = 10kV/

Up = 1,5 kV

Lieferumfang