IAN 69106 - Power outlet POWERFIX - Free user manual and instructions

USER MANUAL IAN 69106 POWERFIX

Exterior view of a black rectangular electronic component with multiple ports (no visible text or symbols)

CE

TABLE OF CONTENTS

Introduction ......2

Scope of supply 2

Safety instructions ....2

For your safety ....3

Intended use ....4

Product overview......4

Structure 4

Functionality overvoltage protection device ..5

Technical data ......6

Operation ....7

Switching on/off 7

Procedure with control light off ....7

Maintenance and cleaning 8

Disposal....8

Warranty and service 9

Declaration of conformity ....10

ENGLISH

INTRODUCTION

Please read the operating instructions carefully. Keep the operating instructions and give them to each user of the multiple socket. For the use of the multiple socket observe the safety instructions contained in the operating instructions.

For questions on spare parts or repairs please contact the manufacturer.

SCOPE OF SUPPLY

• 1 x multiple socket
  • 1 x operating instructions

SAFETY INSTRUCTIONS

Please observe the following safety instructions. Failure to comply with the instructions can result in personal injury and damage.

Damages caused by failure to comply with the operating instructions, especially the safety and handling instructions, void the warranty. The manufacturer cannot be held responsible for any subsequent damage.

FOR YOUR SAFETY

DANGER

Danger to life from electric shock

Do not touch damaged, exposed or energized parts. Danger from electric shock

⇒ Make sure you check the multiple socket for damages before use. Do not use the multiple socket if the cable insulations or the casing are damaged.

CAUTION

Devices switching on accidentally

When switching on the multiple socket, the connected devices might accidentally switch on.

⇒ Before switching on or off the multiple socket, make sure you disconnect all the connected devices.

• To avoid danger, a damaged connecting line of the multiple socket should be replaced by the manufacturer, by a Service representative or a skilled technician only.
• Do not manipulate or alter the multiple socket.
  • Repairs should be performed by a skilled technician only.
• Keep the multiple socket away from children.

INTENDED USE

The multiple socket should be used in dry rooms, exclusively for private purposes. Do not use near liquids that might leak or spout (e.g. aquarium).

Any other use is not permitted.

PRODUCT OVERVIEW

STRUCTURE

The legend refers to the product picture in the inner side of the package.

1 Illuminated on/off switch
2 Overvoltage protection control light

The multiple socket has 8 child-proof sockets with an angle of 45^ .

FUNCTIONALITY OVERVOLTAGE PROTECTION DEVICE

The multiple socket is equipped with an over-voltage protection device. The overvoltage protection device prevents the devices connected to the multiple socket from being damaged by overvoltage in the main supply.

Overvoltages are caused, for instance, by indirect lighting strikes or by the activation of other electrical appliances (monitors, ovens, lamps, etc.).

For a correct operation, the multiple socket should be connected to a socket with a professionally installed protective conductor.

The protection is indicated by the control light 2. When the control light 2 is on, the overvoltage protection is active.

The control light goes off in case the overvoltage protection breaks down.

ENGLISH

TECHNICAL DATA

Name: Multiple socket with overvoltage protection device, type KF-LD-08K Supply voltage: 230 V\~ / 50 Hz Highest continuous voltage Uc: 250 V / 50 Hz Max. surge current: 4500 A Total output: max. 16 A / 3500 W SPD according to EN 61643- 11:2002+A11:2007 Type 3 Combined surge Uoc (L-N): 3 kV Combined surge Uoc (L/N-PE): 3 kV Protection level UP (L-N): 1,8 kV Protection level UP (L/N-PE): 1,8 kV Connecting line: H05VV-F 3G x 1,5 mm², length: 3 m

OPERATION

SWITCHING ON/OFF

The multiple socket is activated and deactivated by use of the on/off switch 1.

PROCEDURE WITH CONTROL LIGHT OFF

Generally the overvoltage protection device works without affecting the operating connected devices.

Control lamp 2 only goes off in case of an overload caused by a too high overvoltage.

⇒ There is no overvoltage protection provided if control lamp 2 does not light up. The multiple socket can still be used in such case, however, it is highly recommended to replace it due to the missing overvoltage protection.

MAINTENANCE AND CLEANING

The multiple socket is maintenance-free.

DANGER

Danger to life from electric shock

Do not touch damaged, exposed and energized parts of the multiple socket and of the cable.

Danger to life from electric shock.

⇒ Never clean the multiple socket when it is energized.
→ Remove the plug from the outlet before cleaning.
⇒ Never immerse the multiple socket in water.

1. Clean the multiple socket with a dry cloth.

DISPOSAL

Do not dispose electrical appliances together with household waste!

In accordance with the European Guideline 2002/96/EU concerning used electrical and electronic equipment, the used electrical equipment must be gathered separately and directed to an environmentally friendly recycling facility.

For information on the disposal of old equipment please contact your local authority.

WARRANTY AND SERVICE

Warranty

This equipment comes with a warranty of 3 years from the date of purchase. Please keep the receipt as proof of purchase. The equipment has been carefully manufactured and tested before the delivery. The warranty covers material and manufacturing faults only if the device has been used properly. In case of unauthorized interference the warranty is void. Your statutory rights are not affected by this warranty. In case of a warranty claim, please call our hotline. This is the only way to ensure the shipment of the equipment is free of charge.

Service address

BAT, Lindenstrasse 35, D-72074 Tübingen e-mail: [e-mail] Service Tel.: [phone] – 72 07 4-1 (14 cent/min. from the German fixed network, Mobile phone max. 42 cent/min.)

For further information, please consult the Service/FAQ's area on our homepage www.dvw-service.com.

ENGLISH

DECLARATION OF CONFORMITY

The CE mark has been affi xed in compliance with the following European directives:

• 2006/95/EC Low voltage directive
• 2004/108/EC EMC Directive

The declaration of conformity is deposited at the manufacturer.

Manufacturer:

BAT, Lindenstrasse 35, D-72074 Tübingen

SADRŽAJ

Uvod ....12

Opseg isporuke 12

Sigurnosne napomene ....12

Za Vašu sigurnost ....13

Diagram of a multi-pin electrical plug with labeled parts 1 and 2

Description, see page 4

Opis, vidi stranicu 14