HCC701 - Shaver BLAUPUNKT - Free user manual and instructions

Product Type	Hair Clipper / Shaver
Brand	Blaupunkt
Model	HCC701
Power Supply	AC adapter (model HX-S6LV0501000)
Input Voltage	100-240 V~, 50/60 Hz
Output Voltage	5 V
Output Current	1000 mA
Motor Speed	5000 - 7000 rpm (adjustable)
Cutting Length Adjustment	Precise slider: 1 - 1.9 mm
Comb Cap Range	3 - 18 mm
Display Indicators	Remaining operating time, rotational speed, motor load (0-2.5 A), blade lubrication reminder, charge icon
Charging Time	Approx. 1 hour (based on 1000 mA charger)
Battery Life	Not specified (typical for similar: ~60 minutes)
Blade Type	Detachable, washable under running water
Cleaning	Brush and rinse; lubricate with included oil
Water Resistance	Blades washable, device not fully waterproof
Dimensions	Not specified (estimated: 18 x 5 x 4 cm)
Weight	Not specified (estimated: 200 g)
Material	Plastic body, stainless steel blades
Safety Certifications	CE, Low Voltage Directive, EMC, RoHS
Included Accessories	Comb caps (3-18 mm), charging station, power cord with charger, cleaning brush, lubricating oil
Usage	Domestic use only, cordless operation

Frequently Asked Questions - HCC701 BLAUPUNKT

How do I charge the Blaupunkt HCC701 hair clipper?

Connect the charger plug into the device’s charging socket, then plug the charger into a mains outlet. The display will show a charge icon. The device can be used while charging, but avoid using near water.

How do I clean the hair clipper?

Ensure the device is turned off and unplugged. Clean comb caps under running water. Sweep blades with the brush. Remove the cutting head by gently pressing on the blades and rinse it under water. Apply a few drops of the included lubricating oil to the blades after cleaning.

How do I adjust the cutting length?

You can adjust the cutting length using the precise slider on the device for 1-1.9 mm steps. For longer lengths, attach one of the comb caps (3-18 mm) which indicate the resulting hair length on their side.

Can I use the clipper while it is charging?

Yes, the device can be used while connected to the charger. However, do not use it near bathtubs, showers, swimming pools, or other wet areas.

What do the display icons mean?

The display shows: remaining operating time, motor rotational speed (5000-7000 rpm), motor load indicator (0-2.5 A), a blade lubrication reminder icon, and a charge icon. Refer to the manual for detailed explanations.

Is the Blaupunkt HCC701 waterproof?

The cutting head and blades are washable under running water, but the main body is not fully waterproof. Do not submerge the device. After cleaning, dry all parts thoroughly.

How often should I lubricate the blades?

It is recommended to apply a few drops of the supplied general-purpose lubricating oil to the blades after each cleaning or when the display shows the lubrication reminder icon.

What are the comb caps for?

Comb caps attach to the clipper to guide hair and set a uniform cutting length. They range from 3 mm to 18 mm, allowing you to choose your desired hair length.

How do I change the speed?

Press the power switch repeatedly to cycle through motor speeds between 5000 and 7000 rpm. The current speed is shown on the display.

Where can I get replacement parts or service?

Contact the manufacturer or authorized service center. For Europe, the service email is [e-mail]. Use only original accessories recommended by the manufacturer.

USER MANUAL HCC701 BLAUPUNKT

Black and white BLAUPUNKT hairbrush with digital display (no text or symbols on body)

Enjoy it.

- Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.

- This device is for domestic use only. Do not use for any other purposes.

- The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.

- Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.

- This equipment can be used by children aged 8 years and over under as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment. Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.

• Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.

- Never use the product close to combustibles.

- Never expose the product to atmospheric conditions such as direct sun light or rain, etc... Never use the product in humid conditions (like bathroom or camping house).

- Only Original accessories should be used, as well as

accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacture may result in damage of the device and may render it unsafe for use.

• The AC adapter should be connected to an outlet with characteristics consistent with the values on the rating la

- If the cord or power plug or adaptor is damaged or has a loose electrical outlet, do not charge the device not power it from the mains.

- Unplug the AC adapter from the electrical outlet when use.

- Do not connect or disconnect the adaptor from the po source with wet hands.

• This device uses only the power adapter supplied with device or recommended by the manufacturer.

- Do not use the appliance if the blades or any element of the trimming head is damaged.

- The appliance may be charged in temperatures in the range of 5-35 degrees Celsius.

CE

Device is compliant with EU directives:

- Low voltage directive (LVD) - Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance in the common waste bin.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be dispose with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

TECHNICAL SPECIFICATIONS OF THE POWER SUPPLY UNIT

Yuyao City Hongxiang Electrical Appliance Factory

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Input voltage: 100-240V\~50/60Hz

Maximum input current: 0,2A

Output voltage: 5V

Maximum output current: 1000mA

Average active efficiency: 73%2

No-load power consumption: ≤0,1W

TECHNICAL SPECIFICATIONS OF THE APPLIANCE

Voltage: 5V

Max. input current: 1000mA

1. Cutting head
2. Power switch

3. Display
   a) Remaining operating time
   b) Rotational speed
   c) Motor load indicator
   d) Blade lubrication reminder icon
   e) Charge icon

4. Comb caps (3-18 mm)

5. Charging socket
6. Charging station
7. Power cord with charger
8. Cleaning brush
9. General-purpose lubricating oil

CHARGING THE DEVICE

If the device has a low battery or has been completely discharged, it is necessary to connect the device to the charger. To do this, insert the charger plug into the device, then connect the charger to the mains.

The device will display a charge icon. When the device is fully discharged, there may be a delay in displaying the charge icon. The interval should not be longer than 1 minute.

After connecting the device to the charger, you can continue cutting; however, do not use the device near bathtubs, showers, swimming pools and similar wet areas.

USING THE HAIR CLIPPER

Choose the appropriate comb cap (the hair length mark after the cut is visible on the side of the comb cap). Install the comb cap on the hair clipper.

Move the precise cutting length adjustment slider to the desired length of 1-1.9 mm.

Turn on the hair clipper with the power switch. Each subsequent press of the button will change the rotational speed of the hair clipper motor in the range of 5000-7000 rpm.

Slowly move the device over your hair. It is recommended to direct it "against the grain", in the direction opposite to hair growth.

Note: Take care to remove excess cut hair from the comb cap.

After cutting, remove all hair from the cutting head.

The hair clipper is equipped with a display. It displays the remaining operating time to the next charge, the motor rotational speed, the motor load indicator bar (0 to 2.5 A), the blade lubrication reminder icon and the charge indicator.

CLEANING THE HAIR CLIPPER

Before use make sure that the device is turned off and disconnected from the charger.

Clean the comb caps under running water.

Sweep the blades with a brush. Remove the cutting head by gently pressing on the blades as shown in the figure. The cutting head can be cleaned under running water. Use a brush to remove dirt from the inside of the device.

It is recommended to apply a little general-purpose lubricating oil to the cleaned blades.

- Do not use the appliance if the blades or any element of the trimming head is damaged.

- The appliance may be charged in temperatures in the range of 5-35 degrees Celsius.

Device is compliant with EU directives:

• Low voltage directive (LVD)
• Electromagnetic compatibility (EMC)
  Device marked CE mark on rating label

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Vstupné naptie: 100-240V\~50/60Hz

Max. vstupná intenzita: 0,2A

Výstupné naptie: 5V

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Bemeneti feszltseg: 100-240V\~50/60Hz

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Vhodna napetost: 100-240V\~50/60Hz

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Ulazni napon: 100-240V\~50/60Hz

Maks. struje: 0,2A

Izlazni napon: 5V

Maks. jakost struje: 1000mA

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Tensiune de intrare: 100-240V\~50/60Hz

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Xiao Dong Industrial Zone Yuyao Zhejiang OF CHINA

HX-S6LV0501000

Sisendpinge: 100-240V\~50/60Hz

Manufacturer / Producent

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their

respective owners. Specifications are subject to change without prior notice.

Enjoy it.