BX5 D3 - Monitor M-AUDIO - Free user manual and instructions

Product Type	Bi-amplified Studio Monitor
Brand	M-Audio
Model	BX5 D3
Category	Monitor
Dimensions (W x H x D)	196 x 320 x 259 mm
Weight	8.7 kg (per speaker)
Power Supply	115V/230V AC selectable via switch
RMS Power	100 W (50 W per amplifier)
Frequency Response	56 Hz - 22 kHz
Woofer	5.25 inches (133 mm) with Kevlar cone
Tweeter	1 inch (25 mm) soft dome
Inputs	Balanced XLR and balanced/unbalanced TRS
Controls	Volume, Acoustic Space switch (-2 dB, -4 dB, Flat)
LED Indicator	Positioning LED for stereo optimization
Port	Rear bass port (do not obstruct)
Fuse	Main external fuse (replaceable)
Box Contents	2 speakers, power cables, acoustic foam pads, user guide
Care and Cleaning	Wipe with a soft dry cloth; do not touch the cones
Safety	Set voltage before connection; do not obstruct the port; use the supplied cable
Spare Parts and Repairability	Replaceable fuse; power cable; no standby mode - turn off when not in use
Warranty	Manufacturer's warranty (see M-Audio website for details)

Frequently Asked Questions - BX5 D3 M-AUDIO

What cables to use to connect the BX5 D3?

You can use a balanced XLR cable or a balanced TRS cable (or unbalanced TS). Balanced connections reduce noise.

How to adjust the Acoustic Space switch?

The Acoustic Space switch compensates for placement near walls. Flat position for free placement, -2 dB or -4 dB if the speaker is close to a wall or corner.

What is the ideal monitor positioning?

Place the speakers at equal distance from your head and from each other to form an equilateral triangle. The tweeters should be at ear height and aimed at the listener.

Can I place the monitors horizontally?

It is better to use them vertically. If horizontal is necessary, place the tweeters inward for a better stereo image.

How to adjust the volume of the BX5 D3?

Use the Volume knob on the rear. First set your source volume to a moderate level, then adjust the monitor.

What does the positioning LED mean?

The LED on the front panel lights up brightly when you are in the optimal listening position for accurate stereo reproduction.

How to connect the power?

Make sure the voltage selector switch (115V/230V) matches your mains. Plug in the supplied power cable, then set the Power On switch to the up position.

What if I hear no sound?

Check the power, signal cable, and that the volume is not at minimum. Make sure the source is sending a signal. Try changing cable or input (XLR/TRS).

Can I use unbalanced cables?

Yes, unbalanced TS cables are compatible, but they may introduce noise. For better quality, use balanced cables (XLR or TRS).

How to maintain the monitors?

Clean the cabinet with a soft dry cloth. Avoid touching the speaker cones. Do not use chemicals. Check and replace the fuse if necessary.

USER MANUAL BX5 D3 M-AUDIO

User Guide (English)

Introduction

Box Contents

BX5 D3

Power Cable

Acoustic Foam Pad

User Guide

Safety & Warranty Manual

Support

For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit m-audio.com.

For additional product support, visit m-audio.com/support.

Setup

Connection Diagram

Items not listed under Introduction > Box Contents are sold separately.

graph TD
    A["M-AUDIO"] -->|Signal| B["FX5"]
    B --> C["Power"]
    D["M-AUDIO"] -->|Signal| E["FX5"]
    E --> F["Power"]
    G["Audio Interface"] --> H["FX5"]
    H --> I["Power"]

Features

Rear Panel

1. XLR Input: This jack accepts XLR input connections with either balanced or unbalanced wiring. The input wiring of an XLR connector should be as follows:

• XLR Pin 1: signal ground (shield)
• XLR Pin 2: signal positive (+)
- XLR Pin 3: signal negative (−)

1. TRS Input: This jack accepts 1/4" (6.35 mm) connections with either balanced or unbalanced wiring. For balanced wiring, a three-conductor TRS plug is necessary. The input wiring of a TRS connector should be as follows:

• TRS Tip: signal positive (+)
- TRS Ring: signal negative (−)
• TRS Sleeve: signal ground (shield)

1. Acoustic Space Switch: Your BX5 D3 monitors should ideally be placed at least one foot away from the nearest wall, ceiling, or other large, flat surface. However, this may be impractical due to space limitations within your studio. For that reason, BX5 D3 monitors feature an acoustic space switch. This switch compensates for placement near walls.

Tip: Be sure to leave at least 3" of space between the rear of the speaker and a wall to allow the rear-firing port to "breathe" properly. Placing the speaker any closer than 3" may adversely affect low-frequency response.

1. Sub-Frequency Vent Port: This port aids in reproduction of very low frequencies by discharging frequencies below 60 Hz and to act as a cooling mechanism to prevent overheating. This port should not be blocked.
2. Volume Control: Use the volume control to set the output from the BX5 D3 to proper levels as required.
3. Power Switch: This switch turns the monitor on and off.

Note: This product does not have a standby/low-power mode.

1. Power Receptacle: Accepts a detachable 3-conductor IEC power cord in order to power the monitor.
2. Fuse Holder: Holds the external main fuse.
3. Voltage-Select Switch: Provides two selections, 115V AC and 230V AC, and should be set to match the "house supply" (receptacle) mains voltage of the country or location in which the speaker is used. The 115V setting is correct for the USA, while the 230V setting is correct for most of the UK and Europe.

Front Panel

1. HF Driver: The tweeter outputs the high frequencies.
2. LF Driver: The woofer outputs the low frequencies.
3. Speaker Placement LED: Helps to locate an optimal speaker placement location for stereo imaging and frequency reproduction. When the LED turns bright, the speaker is in an ideal setup location.

Installation

For optimal performance of the BX5 D3, please read the following thoroughly and carefully prior to installation.

Precautions

• Handling: Please do not touch the speaker cone. The BX5 D3 is packaged in the box tightly, so your attention is required when taking the monitor out of the box. To avoid possible damage to the speaker unit, hold both sides of the monitor in order to pull it out of the box. The speaker cone should not be touched in order to avoid damage even after it is out of the box.
• Correct Power Operation: Since the BX5 D3 contains its own amplifier, it must be connected to a power outlet using the detachable AC cable provided. Before connecting power, please make sure that the Voltage-Select Switch located on the speaker's rear panel is set to the appropriate position, as described in the rear-panel features list appearing earlier in this manual.

WARNING! Use of improper Voltage-Select Switch combinations may result in hazardous conditions and/or damage to speaker components not covered by speaker warranty.

Note: This product does not have a standby/low-power mode.

- Connections: You can connect either an XLR balanced cable or TRS balanced/unbalanced cable from the input of each BX5 D3 to your corresponding preamp, computer, mixer, or game console outputs. We recommend that you use high-quality balanced or unbalanced cables for input connections. Also, ALWAYS turn off the power of the BX5 D3 and turn the volume of the BX5 D3 down to a minimum before making the necessary connections.

Note: When using an unbalanced cable there is a greater chance of experiencing noise issues. If you are using an unbalanced cable and you are experiencing noise issues, try connecting a balanced TRS cable or XLR cable.

Setup

The configuration and placement of your BX5 D3 monitors on speaker stands or your desktop workstation may affect the performance of the speakers. Use the following tips to achieve the best performance out of your BX5 D3 monitors.

Tip: If possible, place your BX5 D3 monitors on speaker stands instead of your desktop. Desks tend to resonate sympathetically at low frequencies and may adversely affect the bass response of your monitors. If speaker stands are not possible due to space restrictions and you notice a buildup in bass, try placing the monitors on isolation pads to acoustically de-couple the monitors from the desk.

XLR Balanced Connection

Assure that the power switch of the BX5 D3 is turned off and that the volume control of the BX5 D3 is turned down to a minimum. Connect the male end of an XLR balanced cable to the balanced input of the BX5 D3.

TRS Balanced/Unbalanced Connection

Assure that the power switch of the BX5 D3 is turned to off and that the volume control of the BX5 D3 is turned down to a minimum. Connect the male end of a TRS balanced or TS unbalanced cable to the TRS input of the BX5 D3.

Connecting to Preamp or Computer Outputs

Before connecting, make sure the output device's power has been turned off. Plug the XLR balanced, TRS balanced or TS unbalanced cable to the corresponding output connectors of a pre-amplifier, audio interface, mixer, computer, or game console.

Speaker Placement

The placement of your speakers has a huge impact on how well they will perform in your studio. Although nearfield studio monitors are designed to be more forgiving when it comes to placement, you should do your best to make sure they form an equilateral triangle relative to your head. In other words, make sure that each speaker is equally distant from both your head as well as the other speaker. Once each speaker has been placed, rotate the speakers slightly so that the drivers are pointing toward the listener.

Take a look at the diagram on the right. Notice that the distance from the listener's head to each speaker is the same as the distance between the left and right speakers. Also note that the speakers are turned slightly so that the drivers are facing the listener. This is an ideal setup but if it is not practical (or possible) to do this, try to match this setup as closely as possible.

graph TD
    A["Left Speaker"] --> B["Listener"]
    C["Right Speaker"] --> B
    B --> D["Speaker"]
    style A fill:#fff,stroke:#000
    style C fill:#fff,stroke:#000
    style B fill:#fff,stroke:#000
    style D fill:#fff,stroke:#000

The speakers and listener should be at the three corners of a triangle having equal length sides.

Speaker Height

The ideal height for BX5 D3 is so that the speaker is parallel to the ground and that the midpoint of the woofer and tweeter is at ear-height.

The diagram to the right demonstrates the ideal placement height of the speakers relative to the listener. Notice that the listener's ears are directly between the woofer and tweeter.

tweeter/woofer midpoint

Diagram showing a human head with two speakers and a wall-mounted device, connected by bidirectional arrows (no text or symbols)

Speaker Orientation

If possible, place the BX5 D3 monitors in their upright position and avoid laying the speakers on their sides. The BX5 D3 woofer and tweeter are vertically aligned and will provide the best performance when the speakers are placed upright. Placing them on their sides may create strong reflections from nearby surfaces resulting in spectrally unbalanced sound.

If your BX5 D3 monitors must be oriented horizontally due to space or line-of-sight considerations, place the speakers so that their tweeter is on the "inside" to improve imaging.

Pure electrical circuit lines without any symbols

Simple line drawing of two rectangular blocks with circular holes, placed on a horizontal base (no text or symbols)

Declaration for Always-On Products for Regulation (EC) No. 1275/2008:

To provide audio signal at the noise floor level, this studio monitor speaker product should be in the “always on” status for terminal users to use. The requirement of a power management function as provided under point 2(d) of Annex II would be “inappropriate for the intended use” of the equipment. This product is an exception to the design requirements as provided under Annex II, thus an “off,” “standby” and/or “another condition” mode and a power management function is not appropriate for its intended use. When not using this product, we suggest switching it off.

Diagram of a speaker setup with two speakers and an oval head, showing sound waves and distance markers (no text or symbols)

Pure electrical circuit lines without any symbols

Simple line drawing of two rectangular objects with circular holes, placed on a horizontal line (no text or symbols)

Diagram showing a human head with two speakers and a wall-mounted speaker, connected by bidirectional arrows (no text or symbols)

Pure electrical circuit lines without any symbols

Simple line drawing of two rectangular objects with circular holes and a horizontal base (no text or symbols)

Diagram showing a human head with two circles and dotted lines indicating distance or alignment, no text or symbols present.

Pure electrical circuit lines without any symbols

Simple line drawing of two rectangular blocks with circular holes, placed on a horizontal line (no text or symbols)

Diagram showing a human head with two speakers and a wall-mounted speaker, connected by bidirectional arrows (no text or symbols)

Pure electrical circuit lines without any symbols

Simple line drawing of two rectangular objects with circular holes, placed on a horizontal line (no text or symbols)

Technical Specifications

High-Frequency Driver	1” (25.4 mm), 40W
Low-Frequency Driver	5” (127 mm), 60W
Frequency Response	52 Hz – 35 kHz
Input Impedance	20 KΩ (balanced)10 KΩ (unbalanced)
Power	Voltage: 100–120V, 50/60 Hz220–240V, 50/60 HzConsumption: 100W
Fuse	220–240V~ T1AL 250V100–120V~ T1.6AL 250V
Dimensions(width x depth x height)	6.9” x 7.8” x 10”176 x 197 x 254 mm
Weight	12.3 lb / 5.6 kg

Specifications are subject to change without notice.

Trademarks & Licenses

M-Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.

All other product or company names are trademarks or registered trademarks of their respective owners.

M-AUDIO.COM