IAN 292039 - Lighting Livarno Lux - Free user manual and instructions

Brand	Livarno Lux
Model	IAN 292039
Product type	LED surface-mounted lamp with LED driver
Total power consumption	Approx. 4.8 W
Primary rated voltage	220-240 V~, 50 Hz, 0.035 A
Secondary rated voltage	12 V, 300 mA
Protection class	II
LED types	Integrated non-replaceable LEDs
Usage	Indoor, closed and dry rooms
Main functions	Flexible adjustable arm, ON/OFF switch, wall mounting
Package contents	LED lamp, LED driver with plug, mounting bracket, screws (3 types), wall plugs, instruction manual
Installation	On wooden wall (screws ⌀3.5x20mm) or concrete (screws ⌀3.5x25mm and wall plugs ⌀6mm)
Maintenance and cleaning	Dry, lint-free cloth, do not use water or solvents
Safety	Do not look at the beam, use only the provided driver, unplug before cleaning
Warranty	3 years from date of purchase
Certifications	TÜV SÜD
Repairability	LEDs non-replaceable, no maintenance required

Frequently Asked Questions - IAN 292039 Livarno Lux

Can this lamp be used outdoors?

No, it is exclusively designed for indoor use in closed and dry rooms.

Can I replace the LEDs if they burn out?

No, the LEDs are not replaceable. If they reach end of life, the entire product must be replaced.

How to install the lamp on a concrete wall?

Use the supplied wall plugs (⌀6 mm) and screws (⌀3.5x25 mm). Drill holes of 6 mm diameter to a depth of 30 mm, insert the wall plugs, then attach the mounting bracket with the screws.

Can I use a different power adapter than the one provided?

No, use only the provided LED driver (model GY-CC12V300mA-L-003), otherwise the warranty is void and there is a safety risk.

What to do if the power cord is damaged?

Do not use the product. Contact an electrician for repair. A damaged cable poses a life-threatening risk of electric shock.

Does the lamp get hot?

The LEDs become hot during operation. Allow to cool before touching. The LED driver consumes a small amount of electricity even when off; unplug the plug to completely cut off power.

How to clean the lamp?

First unplug the plug. Use a dry, lint-free cloth. Never use water, solvents, or liquid products.

Can I direct the lamp in all directions?

Yes, the flexible lamp arm allows you to direct the lamp. Do not turn it completely to avoid damaging the internal cable.

Is the lamp compatible with a dimmer?

The manual does not mention compatibility with a dimmer. It is recommended not to use a dimmer as it could damage the LED driver.

What to do in case of malfunction under warranty?

Keep the receipt as proof of purchase. The warranty lasts 3 years. Contact the seller for a free exchange or repair in case of material or manufacturing defect.

USER MANUAL IAN 292039 Livarno Lux

Assembly, operating and safety instructions

FR BE

LAMPE LED POUR MONTAGE EN SAILLIE

LÁMPARA LED FLEXIBLE

GB/IE Assembly, operating and safety instructions Page 13

Intended use......Page 14

Parts Description......Page 14

Technical Data Page 15

Scope of delivery....Page 15

Safety Page 15

Safety instructions......Page 15

Before use......Page 17

Installation Page 17

Mounting the product on wooden wall.....Page 17

Mounting the product on concrete wall .....Page 17

Start-up Page 18

Maintenance and Cleaning......Page 18

Disposal Page 18

Warranty Page 19

List of pictograms used
	LED lifespan
	Short-circuit-proofSafety isolating transformer
	Separate control unit
	Use indoors
	Alternating current
	Safety class II
	Direct current

LED mountable light

- Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

- Intended use

This product is intended for indoor use in dry and enclosed rooms only. The product is not intended for commercial use.

●Parts Description

1 LED light
2 Flexible lamp arm
3 Cover
4 Mounting bracket
5 Screws (ø 3.5 x 20 mm)
6 Locking screw
7 Wall plug (ø 6 mm)
8 Screws (ø 3.5 x 25 mm)
9 Low voltage plug connection
10 LED driver
11 Screws (ø 3 x 15 mm)
12 ON/OFF switch
13 Mains plug

●Technical Data

LED mountable light + LED driver

Total power input: approx. 4.8 W

LED mountable light:

Operating voltage: 12V=3.6W

Operating voltage

per LED: approx. 0.5 W

The lighting set cannot be replaced.

TÜV SÜD certified.

LED driver:

Rated voltage,

primary: 220-240V\~50Hz, 0.035A

Rated voltage,

secondary: 12V = 300mA

Protection class: II /

Model no.: GY-CC12V300mA-L-003

TÜV SÜD certified.

- Scope of delivery

1 LED mountable light
1 LED driver with mains plug
4 Screws ( 3.5 x 25 mm)
4 Screws ( 3.5 x 20 mm)
2 Screws (ø 3 x 15 mm)
4 Wall plugs (ø 6 mm)
1 Operating instructions

Safety

Safety instructions

READ THESE INSTRUCTIONS BEFORE USING THE PRODUCT! PLEASE KEEP ALL SAFETY INSTRUCTIONS AND INSTRUCTIONS FOR USE FOR FUTURE REFERENCE!

WARNING! DANGER TO LIFE AND RISK OF ACCIDENT FOR INFANTS AND CHILDREN! Never

leave children unsupervised with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Please keep the product out of the reach of children at all times.

This product is not a toy. Keep away from children. Children are not able to understand the dangers that can arise when handling this product.

This product may be used by children aged 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and / or knowledge, so long as they are supervised or instructed in the safe use of the product and un-

derstand the associated risks. Do not allow children to play with the product. Cleaning and user maintenance should not be performed by children without supervision.

■

product is solely suitable for use in dry, closed indoor spaces.

The product is not suitable for attaching to tubular objects. The product may otherwise fall. This can result in product damage and / or injuries.

Avoid the danger of death from electric shock!

• Verify the existing mains voltage corresponds to the required voltage of the product (220–240 V\~) before using it.
  Always check the product and the mains supply for damage before connecting it to the mains. A damaged product represents the danger of death from electric shock.
  Do not use the product if you detect any damage.
  In the event of damage, repairs or other problems with the product, please consult an electrician.
  Never open any of the components of the electrical equipment or insert any objects into the same components. This will pose a risk of fatal injury from electric shock.
  ■ Never allow the product to come into contact with water or other liquids.
• Protect the power cord from sharp edges, mechanical strain and hot surfaces.
  ■ Never use the product in immediate vicinity of a bath, shower or swimming pool.
  Do not look directly into the light or its reflection. Do not aim the light directly at people. This could produce glare, leading to accidents.
  ■ f direct or reflected light strikes your eyes, close them and immediately move your head out of the light.
  Only operate the product with the included LED driver (GY-CC12V300mA-L-003). Please note that any damage caused by the use of a different LED driver is excluded from the warranty.
  ■ Never touch the mains plug 13 with damp or wet hands.
  If the product will not be used for extended periods (e.g. during holidays), unplug the mains plug 13 from the socket.
  The LEDs becomes hot during operation. Allow the product and LEDs to cool down before you touch them.
  Please note, the LED driver will continue to draw a small amount of electricity even without the product being operated so long as the mains plug is plugged into the socket. Unplug from the socket to switch the product off completely.
  ■ The LEDs are not replaceable.
  If the LEDs fail at the end of their lives, the entire product must be replaced.

- Before use

Note: Remove all packaging materials from the product.

- Installation

- Mounting the product on wooden wall

Move the cover upward (Fig. A).
Use the mounting bracket and screws 5 to mount the product.
Hold the mounting bracket against the desired surface and mark the drill holes (Fig. A). Now drill the mounting holes (ø approx. 2 mm, approx. 17 mm deep).
☐ Position the mounting bracket according to the predrilled holes and tighten the screws 5 by a cross tip screwdriver (Fig. A).
The lamp arm can be fixed, if desired. To do so, tighten the two locking screws 6 on the swivel joint.
Move the cover downward.
Connect the low voltage plug connection with the LED driver 10 (Fig. C).
Mount the LED driven using the included screws 11 (Fig. C).
Plug the mains plug into the mains socket.

Your product is now ready to use.

- Mounting the product on concrete wall

□ Move the cover 3 upward (Fig. B).
☐ Use the mounting bracket 4 screws 8 and the wall plugs 7 for wall mounting.
Hold the mounting bracket against the desired surface and mark the drill holes (Fig. B). Now drill the mounting holes (ø 6 mm, approx. 30 mm deep).

⚠CAUTION! Ensure that you do not damage any electrical cables, gas or water pipes when you drill into the wall.

☐ Insert the included wall plugs 7 into the bores.
☐ Position the mounting bracket according to the predrilled holes, insert the screws 8 into the wall plugs 7 and tighten the screws 8 by a cross tip screwdriver (Fig. B).
The lamp arm can be fixed, if desired. To do so, tighten the two locking screws 6 on the swivel joint.
Move the cover downward.
Connect the low voltage plug connection with the LED driver 10 (Fig. C).
Mount the LED drive using the included screws [11] (Fig. C).
Plug the mains plug into the mains socket.

Your product is now ready to use.

- Start-up

☐ Never aim the LED beam at reflective surfaces, people or animals. Failure to observe this advice may result in eye irritation and / or blindness in humans and animals. Even a weak LED light beam can cause eye damage.
☐ Switch the product on and off using the ON / OFF switch 12
Adjust the angle of the LED light and bend the flexible lamp arm 2 to move the product into the desired position.

Note: Do not fully rotate the flexible lamp arm 2. Otherwise the mains lead inside the flexible lamp arm 2 could be damaged.

● Maintenance and Cleaning

Note: The product requires no maintenance. The LEDs cannot be replaced.

Do not use solvents, benzene or similar substances. They could damage the product.
□ Unplug the mains plug from the socket.
CAUTION! RISK OF ELECTRIC SHOCK! For electrical safety, never clean the product with water or other liquids, or immerse it in water.
☐ Only use a dry, lint-free cloth for cleaning.
☐ Never aim the LED beam at reflective surfaces, people or animals. Failure to observe this advice may result in eye irritation and / or blindness in humans and animals. Even a weak LED light beam can cause eye damage.

●Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. The Green Dot is not valid for Germany.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics / 20-22: paper and fibreboard / 80-98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

- Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it - at our choice - free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

CE

Légende des