PFR 28 B2 - Pressure washer PARKSIDE - Free user manual and instructions

Product type	Terrace cleaner (accessory for high-pressure cleaners)
Model	PFR 28 B2
Brand	Parkside
Intended use	High-pressure cleaning of floors and wall surfaces, private
Compatible high-pressure cleaners	Parkside PHD 100 A1, PHD 100 B2, PHD 100 C2, PHD 100 D2, PHD 100 E2, PHD 110 A1, PHD 135 A1, PHD 150 A1, PHD 150 B2, PHD 150 C2, PHD 150 D3, PHD 150 E4, PHD 150 F4
Maximum operating pressure	16 MPa (2320 psi)
Maximum flow rate	450 l/h
Maximum inlet temperature	60 °C
Cleaning agent tank capacity	260 ml
Material	Plastic and metal
Extension element length	Approx. 30 cm (estimation)
Weight	Approx. 1.2 kg (estimation)
Connection	Adapter with bayonet connection for spray gun
Pressure adjustment	Yes, via rotary pressure regulator
Cleaning agent flow adjustment	Yes, via rotary regulator
Maintenance	Maintenance-free, clean with soft brush and damp cloth
Storage	Frost-free
Warranty	3 years
Identification number (IAN)	297588
Spare parts - Adapter	Ref. 30300505
Spare parts - Complete surface cleaner	Ref. 91098865
Customer service France	0800 919270, [e-mail]
Customer service Belgium	070 270 171 (0.15 EUR/min), [e-mail]

Frequently Asked Questions - PFR 28 B2 PARKSIDE

Is the Parkside PFR 28 B2 a complete high-pressure cleaner?

No, the PFR 28 B2 is a terrace cleaner (surface cleaner) that attaches to a compatible Parkside high-pressure cleaner. It allows cleaning floors and walls without splashing.

Which Parkside high-pressure cleaners are compatible with the PFR 28 B2?

It is compatible with models PHD 100 A1, PHD 100 B2, PHD 100 C2, PHD 100 D2, PHD 100 E2, PHD 110 A1, PHD 135 A1, PHD 150 A1, PHD 150 B2, PHD 150 C2, PHD 150 D3, PHD 150 E4, PHD 150 F4. Thanks to the supplied adapter, it can also fit other brands if pressure and flow rate are respected (max 16 MPa, 450 l/h).

How to adjust the water pressure on the PFR 28 B2?

Turn the pressure regulator (10) counterclockwise to decrease pressure, clockwise to increase it. This changes the rotation speed of the nozzles.

How to use the cleaning agent with this accessory?

Pour up to 260 ml of biodegradable cleaning agent into the tank (cover 7). Adjust the flow with the flow regulator (11): turn clockwise to reduce, counterclockwise to increase. Close it completely after use to avoid leaks.

Can I use the PFR 28 B2 on vertical surfaces (walls)?

Yes, it is designed for floors and wall surfaces. Hold the appliance by the handle (9) and do not direct it towards open corners. Ensure that the jet is only activated when the appliance is in contact with the surface.

What safety precautions are important?

Never direct the high-pressure jet at people, animals, electrical equipment, or the appliance itself. Wear protective clothing if necessary. Keep children away. Disconnect the cleaner before any maintenance.

How to maintain the PFR 28 B2?

The appliance is maintenance-free. Clean it with a soft brush or slightly damp cloth. Do not use solvents or aggressive products. Store it in a dry, frost-free place.

What to do if a part is damaged?

You can order spare parts at www.grizzly-service.eu or contact customer service. The references are: adapter (30300505) and complete surface cleaner (91098865). The 3-year warranty covers material and manufacturing defects.

Can the PFR 28 B2 be used with a high-pressure cleaner from another brand?

Yes, thanks to the supplied adapter, it can be mounted on cleaners from other manufacturers, provided that the operating pressure does not exceed 16 MPa and the flow rate 450 l/h. Check the compatibility of the connection.

How to store the appliance after use?

Empty the cleaning agent tank and close the flow regulator. Clean the appliance. Store it in a frost-free, dry place out of reach of children.

USER MANUAL PFR 28 B2 PARKSIDE

Translation of the original instructions

NL BE

TERRASREINIGER

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FR BE

GB / IE Translation of the original instructions Page 11

Service-Center......10

Importeur ......10

General Description......11

Extent of the delivery 12

Overview....12

Functional description....12

Technical data....12

Notes on Safety 12

Symbols in the manual....12

Symbols on the device....12

General notes on safety 13

Working with the equipment......13

Fitting 13

Connection without adapter .....13

Connection with adapter .....14

To release 14

Start-up 14

Working instructions....14

Pressure control....14

Cleaning agent dose controlling .....14

Cleaning agent tank....14

Cleaning and Maintenance......15

Cleaning....15

Maintenance 15

Storage....15

Waste Disposal and Environmental Protection .....15

Replacement parts / Accessories 15

Guarantee 15

Repair Service......17

Service-Center....17

Importer ....17

Translation of the original EC declaration of conformity .....54

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high quality product.

The operating instructions constitute part of this product. They contain important information on safety, use and disposal.

Before using the product, familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the applications specified.

Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Intended use

This patio cleaner is intended for private use only:

• for high-pressure water cleaning of floors and walls;
• can alternatively be used with a cleaning agent.
• cleaning the object according to its manufacturer's information.

The patio cleaner is designed for use with pressure washer Parkside

PHD 100 A1, PHD 100 B2, PHD 100 C2,

PHD 100 D2, PHD 100 E2, PHD 110 A1,

PHD 135 A1, PHD 150 A1, PHD 150 B2,

PHD 150 C2, PHD 150 D3, PHD 150 E4, PHD 150 F4.

General Description

The diagram of the most important functional elements can be found on the foldout side.

Extent of the delivery

Unpack the pressure washer and verify the contents:

• Patio cleaner
• Connection pipe
• Pipe extension
• Adapter
• Instruction for use

Overview

1 Adapter

2 Retainer nut of adapter
3 Retainer nut
4 Pipe extension
5 Connection pipe
6 Pivoting connector
7 Cap for cleaning agent tank

8 Body

9 Handle

10 Pressure regulator
11 Cleaning agent dose controller

Functional description

The patio cleaner is designed for splash-proof pressure cleaning of floors and walls. Rotating nozzles ensure that cleaning is highly efficient. Alternatively, the cleaning agent can be used by means of the built-in tank with convenient dose controller. The adapter is suitable for connecting to other common high pressure cleaners made by other manufacturers.

Technical data

Patio cleaner ......PFR 28 B2

Suitable for devices with the following performance data:

Rated pressure (p) .....11 MPa / 1595 psi Permissible pressure

(p max) ....16 MPa / 2320 psi Max. flow rate (Q max) ....450 l/h Max. Supply temperature

(T max) .... 60 °C / 140 °F Cleaning agent tank filling level.....260 ml

The patio cleaner is designed for pressure washers working at a nominal pressure (p) of 90-160 bar.

Notes on Safety

This Section is concerned with the basic safety rules when working with the patio cleaner.

Symbols in the manual

Warning symbols with information on damage and injury prevention.

Help symbols with information on improving tool handling.

Symbols on the device

Caution: to avoid accidents and injuries.

Never reach under the patio cleaner when it is on.

Read the manual.

General notes on safety

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- People who are unfamiliar with the operating instructions are not permitted to use the equipment. The operation of the equipment is not authorised for people under the age of 16.

Working with the equipment

CAUTION. pressure washers can be dangerous if they are not operated correctly!

The jet must never be directed at people, animals, electric equipment connected to the power supply or against the actual pressure washer.

- Do not direct the jet at yourself or others in order to clean clothes and shoes.

- Do not operate the pressure washer when other people are in the immediate vicinity, other than they are also wearing protective clothes.

- Do not start the high-pressure wash until the patio cleaner rests on the surface you are cleaning.

- Take appropriate measures to keep children away from the equipment whilst it is running.

- Dispose of the packaging material correctly.

- Do not use the equipment in the vicinity of flammable liquids or gases. Non-observance will result in a risk of fire or explosion.

• Store the equipment in a dry place and out of reach of children.
  • Children should be supervised to ensure that they do not play with the appliance.
• Follow the security tips of your high-pressure washer.
• The operator or user is responsible for any accidents or personal injury and/or material damage to third parties or their property.

Caution! To avoid damage to the equipment and any possible person injury resulting from this:

• Do not use for cleaning windows.
• Do not work with damaged or incomplete equipment, or with equipment that has been converted without the approval of the manufacturer.
• Protect the patio cleaner from frost
• Use only original accessories and do not carry out conversion work on the equipment.

Fitting

Connection without adapter

1. Screw the connection pipe (5) into the pivoting connector (6).

2. To extend your reach, snap on and turn the bayonet mount of the pipe extension (4) to the connection pipe (5).

3. To connect to the PARKSIDE-pressure washer, snap the bayonet mount into the PARKSIDE-pressure washer's jet gun.
4. When you use the extension element (4) screw the retainer nut (3) against the spray gun.

Connection with adapter

1. Attach the adapter (1) to the extension element (4) or the connecting element (A 5) and turn it through 90^ until it locks into place (bayonet locking device). Screw the cap nut (3) of the extension element (4) against the adapter (1).

2. Connect the spray gun (bayonet locking device) and screw the cap nut (2) of the adapter (1) against the spray gun.

To release

1. Release the retainer nut of adapter (B 2) on the adapter (1).
2. Loosen retainer nut (A 3) on the extension element (A 4).
3. Release the catches by pushing and turning through 90° in the opposite direction (Bayonet catch).

Start-up

Working instructions

Take heed of the backstroke generated by the jet of water. Stand firmly and hold the jet gun tightly. You may otherwise injure yourself or others.

• Do not release water from the pressure washer until the patio cleaner rests on the surface you are cleaning.
• Always hold the patio cleaner by the handle (A 9) when washing down walls.
• Avoid the patio cleaner going over free corners.
• The patio cleaner is not designed for scouring out or scrubbing.

Pressure control

1. You can adjust the pressure of the escaping water jet by turning the pressure regulator (10). Accordingly, the rotation speed of the nozzles changed

2. Increase the pressure (+) by turning the pressure regulator (10) in a clockwise direction. Reduce the pressure (−) by turning the screw counterclockwise connections.

Cleaning agent dose controlling

Once the cleaning operation has been completed, fully turn the dose controller (11) for the cleaning agent (clockwise (-)) until it closes to prevent cleaning agent escaping.

1. You can automatically regulate the volume of cleaning agent that is released by turning the cleaning agent dose controller (11).

2. Turning the cleaning agent dose controller (11) clockwise reduces the volume of cleaning agent (-). Turning it counter-clockwise increases the volume of cleaning agent (+) accordingly.

Cleaning agent tank

1. Screw on the cleaning agent tank cap (7) in a counter-clockwise movement. You can pour in up to 260 ml liquid cleaning agent.

2. Screw on the cleaning agent tank cap (7) in a clockwise movement.

Using cleaning agents

Use a neutral, biodegradable cleaning agent. Always use the cleaning agent in accordance with the manufacturer's instructions.

Cleaning and Maintenance

Always remove the mains plug of the high pressure cleaner before working on the device. There is a risk of electric shock or injury from moving parts.

Cleaning

Always keep the washer clean. Do not use any detergents or solvents.

- Only clean the pressure washer with a soft brush or a slightly moist cloth.

Maintenance

The device is maintenance-free.

Storage

- Store the device in a frost-free room.

Waste Disposal and Environmental Protection

Be environmentally friendly. Return the tool, accessories and packaging to a recycling centre when you have finished with them. Hand the tool in at a recycling centre. The plastics and metal parts can be separated and recycled. Ask your Service Center about this.

Defective units returned to us will be disposed of for free.

Replacement parts / Accessories

Spare parts and accessories can be obtained at www.grizzly-service.eu

If you do not have internet access, please contact the Service Centre via telephone (see "Service-Center" Page 17). Please have the order number mentioned below ready.

A 1 Adapter....30300505 A 6-11 Surface cleaner.....91098865

Guarantee

Dear Customer, This equipment is provided with a 3-year guarantee from the date of purchase. In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.

If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it occurred.

If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery.

The guarantee applies for all material and manufacturing defects. This guarantee does not extend to cover product parts that are subject to normal wear and may therefore be considered as wearing parts (e.g. brush or nozzles) or to cover damage to breakable parts (e.g. switch).

This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided. The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch.

Processing in Case of Guarantee

To ensure quick handling of you issue, please follow the following directions:

- Please have the receipt and item number (IAN 297588) ready as proof of purchase for all enquiries.

- Please find the item number on the rating plate.

- Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.

- After consultation with our customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you.

We can handle only equipment that has been sent with adequate packaging and postage.

Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect.

Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.

We will dispose of your defective devices free of charge when you send them to us.

Service-Center

GB Service Great Britain

Tel.: [phone] (£ 0.10/Min.)

E-Mail: [e-mail]

IAN 297588

IE Service Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [e-mail]

IAN 297588

Importer

Please note that the following address is not a service address. Please initially contact the service centre specified above.

Service-Center......24

Importateur ......24

Service-Center....31

Importeur ....31

Service-Center......45

Importador ....45

Service-Center....52

Importador 52

Translation of the original EC declaration of conformity

We hereby confirm that the

Surface cleaner

design PFR 28 B2

Serial Number: 201801000001 - 201801046000

conforms with the following applicable relevant version of the EU guidelines:

2006/42/EC

This declaration of conformity is issued under the sole responsibility of the manufacturer:

Documentation Representative