IAN 101510 - Lighting Livarno Lux - Free user manual and instructions

Product Type	Halogen Desk Lamp
Model Number	IAN 101510
Brand	Livarno Lux
Power Supply	230-240 V~, 50 Hz
Bulb Type	G4, 12 V~, max. 20 W (included)
Protection Class	II (double insulated)
Cable Length	Approx. 1.8 m
Dimensions (Base)	Approx. 11.8 cm
Height (Adjustable)	Approx. 26–47 cm
Material	Plastic, metal, glass
Color Variants	Blue, Titanium, Black, Green
Adjustable Features	Telescopic arm, adjustable lamp head with lever
Switch	ON/OFF switch on lamp
Minimum Distance to Objects	At least 0.2 m
Cleaning Instructions	Use dry, fluff-free cloth; do not use water or solvents
Replacement Bulb	G4, 12 V, max. 20 W (available separately)
Warranty	3 years from date of purchase
Included Items	1 lamp, 1 bulb (G4/20W), 1 operating manual
Intended Use	Indoor, dry and enclosed rooms, private household only

Frequently Asked Questions - IAN 101510 Livarno Lux

How do I replace the bulb?

First, unplug the lamp and let it cool for at least 15 minutes. Use a crosshead screwdriver to remove the screws (6) and glass-retainers, then take off the lamp shade (7). Pull out the defective bulb (8) and insert a new G4/20W bulb. Ensure pins are correctly engaged. Reattach the shade and screws.

Can I dim this lamp?

No, the lamp is not dimmable. It operates at full brightness only.

What is the minimum distance I should keep from objects?

Always maintain at least 0.2 meters (20 cm) between the lamp and any furniture or furnishings to prevent fire risk.

How do I clean the lamp?

Unplug the lamp before cleaning. Use a dry, fluff-free cloth. Do not use water, solvents, or immerse in water, as this could cause electric shock or damage.

What type of bulb does it use?

It uses a G4 halogen bulb, 12 V, with a maximum power of 20 W. A suitable bulb is included with the lamp.

Can I use the lamp outdoors?

No, the lamp is designed for indoor use only in dry and enclosed rooms. Using it outdoors may cause electric shock or damage.

What should I do if the protective glass is broken?

Replace the protective glass (lamp shade) before using the lamp again. Contact the service centre for a replacement part.

Is the lamp height adjustable?

Yes, the lamp has a telescopic arm that allows you to adjust the height from approximately 26 cm to 47 cm.

How long is the warranty?

The lamp comes with a 3-year warranty from the date of purchase, valid for the original purchaser. Keep your receipt as proof of purchase.

Can I use a different bulb wattage?

No, only use bulbs with a maximum of 20 W (G4, 12 V). Using a higher wattage can cause overheating and fire hazard.

USER MANUAL IAN 101510 Livarno Lux

HALOGEN DESK LAMP

HALOGEN DESK LAMP

Operation and Safety Notes

HALOGÉN ÍRÓASZTALI LÁMPA

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

PL

GB Operation and Safety Notes Page 5

Introduction

Proper use......Page 7

Included items ...... Page 7

Description of parts and features...... Page 8

Technical data......Page 8

Safety advice Page 9

Operation

Using the lamp ...... Page 11

Replacing a bulb....Page 11

Cleaning and maintenance ...... Page 12

Warranty and Service

Warranty Declaration......Page 13

Service address......Page 14

Declaration of conformity....Page 14

Manufacturer......Page 14

The following pictograms are used in these operating instructions / on the device:
	Read instruction manual!
	Observe warning and safety notes!
	Always keep the product out of reach of children.
	Caution - electric shock! Risk of loss of life!
	Risk of loss of life by electric shock from damaged mains lead or mains plug!
	Risk of burns!
	Attach the lamp at a minimum distance of 0.20 mtr to the materials being lit.
	If protective glass is broken, replace prior to using the lamp again.
	Volt (AC)
	Watts (Effective power)
	Dispose of packaging and appliance in an environmentally friendly way!

Halogen Desk Lamp

- Introduction

We congratulate you on the purchase of your new device.

You have chosen a high quality product. These operating instructions form a part of this product. They contain important

information on safety, use and disposal. Make yourself familiar with all the operating instructions and safety advice for the product before use. Use the product only as described and for the indicated purpose. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it. Check that the correct mains voltage is available and that all the parts have been properly assembled before bringing into use.

Properuse

This lamp is designed for use indoors only, in dry and enclosed rooms. This product is intended for use in a private, domestic environment only. Other uses or modification of the product shall be considered as improper use and could lead to injury or damage. The manufacturer accepts no liability for loss or damage arising from improper use.

Includeditems

Check that all the items and accessories are present and that the lamp is in perfect condition immediately after unpacking.

Introduction

1 x Halogen desk lamp
1 x Illuminant (G4/20W)
1 x Operating instructions

• Description of parts and features

1 Lamp head
2 Adjustment lever
3 ON/OFF switch
4 Mains lead
5 Telescopic arm
6 Screws
7 Lamp shade
8 Bulb

●Technicaldata

Operating voltage: 230-240V\~, 50Hz

Protection class:

Illuminant: G4/20W, 12V\~, 50Hz

(included in delivery)

Wattage: max. 20 W (G4, 12 V\~)

Length of cable: approx. 1.8 m

Material: plastic, metal, glass

Dimensions: base: approx. 11.8 cm

height (adjustable): approx. 26–47 cm

Model:

7596-010L (blue)

7596-014L (titanium)

7596-015L (black)

7596-019L (green)

Safety advice

The right to claim under the guarantee shall be rendered invalid in respect of damage caused by the non-observance of these operating instructions! No liability is accepted for consequent damage! No liability is accepted for damage to property or persons caused by improper handling or non-observance of the safety advice!

RISK A DE WOSSIOE LIFE AND

ACCIDENT TO INFANTS AND CHILDREN!

Never leave children unsupervised with the packaging materials. Packaging materials present a suffocation hazard.

Children often underestimate danger. Always keep the product out of reach of children.

To avoid danger to life from electric shock

Before connecting the lamp to the mains 4, always check it and the mains lead/plug for any damage. Never use your lamp if you discover that it is damaged in any way.
If the external flexible lead of this lamp becomes damaged, avoid danger and have it replaced by the manufacturer, his servicing agent or an equivalent electrical appliance repair specialist.

CAUTION! A damaged mains lead presents a serious danger to life from electric shock. In the event of damage, repairs or other problems with the lamp, please contact the Service Centre or an electrician.

■ Never let the lamp come into contact with water or other liquids.
■ Never open any electrical devices such as switches, fittings etc. or allow any object to be inserted into them. This sort of interference can lead to a serious danger to life from electric shock.
■ Only touch the insulated part of the plug when connecting to or disconnecting from power!
Before installation ensure that the available mains voltage agrees with the operating voltage required for the lamp (230–240 V \~).

To avoid danger of fire and injury

⚠️DANGER OF INJURY! Check all bulbs and shades for damage immediately after unpacking. Do not fit a defective shade into the lamp. In this event contact the Service Centre for a replacement.

⚠️ DANGER OF BURNS! Ensure the lamp has been switched off and allowed to cool before you touch it. In this way you will avoid the danger of burns. Light bulbs develop a great deal of heat.

- Replace defective bulbs immediately. Before replacing the bulb, always remove the mains plug from the mains socket.

- Allow the lamp to cool for at least 15 minutes before replacing a defective bulb.

DANGER OF FIRE! Always ensure that there is at least 0.2 m clear distance between the lamp and other items of furniture or furnishings.

- Do not allow any objects to cover the lamp. Fire can result from the development of too much heat.

■ Position the lamp so that it is protected from moisture and dirt.
■ Never leave the lamp operating unattended.
■ Use the above-indicated bulbs only.
CAUTION! RISK OF INJURY! If protective glass is broken, replace prior to using the lamp again.

Operation

Using the lamp

□ Always ensure that there is at least 20 cm clear distance between the lamp and other items of furniture or furnishings.
□ Unwind the mains cable 4 completely before use.
☐ Insert the mains plug into the socket.
☐ Set the lamp head 1 to the desired height with the telescopic arm 5.
☐ Set the lamp head 1 in the desired position with the adjustment lever 2.

CAUTION! DANGER OF BURNS! If the lamp is switched on, adjust the lamp head 1 with only the adjustment lever 2. Do not touch the lamp head 1. The lamp head 1 gets very hot when the lamp is switched on.

☐ Set the ON / OFF switch 3 into position I to switch on the device.
☐ Set the ON / OFF switch 3 into position 0 to switch off the device.

- Replacing a bulb

CAUTION! DANGER TO LIFE FROM ELECTRIC SHOCK!

Pull the mains plug out of the socket.

Operation / Cleaning and maintenance

Note: To do this you will require a crosshead screwdriver.

☐ Allow the bulb 8 to cool down completely.

Note: Ensure that the lamp shade does not fall out when the last screw 6 is released.

☐ Screw out the screws 6 in the direction and completely remove all the glass-retainers.

Remove the lamp shade 7.

☐ Use a clean, fluff-free cloth when you are replacing a bulb.

Draw the defective bulb 8 out of the socket.

☐ Then insert a new bulb (max. 20 W) into the socket.

Note: Ensure that the pins are correctly engaged in the socket.

Place the lamp shade 7 back into the recess.

□ Screw in the screws 6 in the direction C

Note: Ensure that the brackets of the glass-retainers rest properly against the lamp shade 7.

● Cleaning and maintenance

CAUTION! DANGER TO LIFE FROM ELECTRIC SHOCK!

Before cleaning, always pull out the mains plug out of the socket. For electrical safety reasons, never clean the lamp with water or other fluids or immerse it in water.

- Do not use solvents such as petrol and the like as they could damage the lamp.

□ Use a dry, fluff-free cloth for cleaning.

☐ The lamp is maintenance-free.

- Disposal

The packaging consists entirely of environmentally friendly materials. They can be disposed of at your local recycling facility.

The symbol of the wheelie bin with a cross through It means that, in the European Union, the product has to be disposed of in a separate refuse collection. This applies to the product and to all components bearing this symbol. Products marked in this way may not be disposed of with normal domestic waste but have to be handed in at a recycling collection point for electrical and electronic appliances. Recycling helps to reduce the consumption of raw materials and to ease the burden on the environment.

● Warranty and Service

WarrantyDeclaration

This product has a 3-year warranty from the date of purchase; the warranty is only valid for the original purchaser and is not transferable. Please keep your receipt as proof of purchase. The warranty applies to material or manufacturing defects only. It does not cover wear parts or damage caused by improper use. The guarantee lapses in cases of unauthorized tampering. Your statutory rights are not restricted in any way by this warranty. Please contact the service centre by telephone. In the event of any claims under the warranty. This is the only way to ensure that your instrument can be returned free of charge.

Serviceaddress

Please have your receipt and the product number (e.g. IAN 12345) available for all queries as proof of purchase.

Declaration of conformity CE

This product fulfils the requirements of the applicable European and national directives (Electromagnetic Compatibility 2004/108/EC, Low Voltage Directive 2006/95/EC, Ecodesign Directive 2009/125/EC, RoHS Directive 2011/65/EU). Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

Manufacturer

59929 Brilon (Germany)