IAN 352338 - Uncategorized PARKSIDE - Free user manual and instructions

Product Type	Core drill set (hole saw kit)
Model	IAN 352338
Brand	PARKSIDE
Core Drill Diameters	68 mm and 82 mm
Centre Drill Diameter	8 mm (carbide tip)
Centre Drill Length	110 mm
Number of Centre Drills	2
Adapters Included	1 x SDS-plus, 1 x hex shank
Maximum Speed	320 min⁻¹ (rpm)
Max Drilling Depth	50 mm
Chuck Compatibility	SDS-plus or hex shank
Material of Centre Drill	Carbide tip
Assembly Required	Yes, screw core drill onto adapter, insert centre drill with wrench
Cleaning Method	Wipe with slightly moist, lint-free cloth
Disposal	Recyclable packaging; dispose of worn product at local recycling facility
Service Contact (UK)	Tel: [phone], Email: [e-mail]
Safety Precautions	Follow operating instructions and safety advice; use only as intended
Warranty	Refer to provided documentation

Frequently Asked Questions - IAN 352338 PARKSIDE

What is included in the PARKSIDE IAN 352338 core drill set?

The set includes two core drills (∅68 mm and ∅82 mm), two centre drills (∅8 mm), one SDS-plus adapter, and one hex shank adapter.

How do I assemble the core drill set?

Insert the centre drill into the appropriate adapter (SDS-plus or hex shank) and tighten with a wrench. Then screw the core drill onto the same adapter.

What is the maximum speed and drilling depth?

The maximum nominal speed is 320 rpm and the maximum drilling depth is 50 mm.

Which adapter should I use?

Use the SDS-plus adapter if your drill has an SDS-plus chuck, or the hex shank adapter for standard hex chucks.

Can I use this set with a regular drill?

Yes, by using the hex shank adapter, it can be used with a standard drill that accepts hex shanks.

How do I clean and maintain the core drill set?

Clean with a slightly moist, lint-free cloth. Do not use harsh chemicals or abrasive cleaners.

What materials can be drilled with this set?

It is designed for drilling holes in materials such as wood, plasterboard, and masonry. Always check the specific application.

Is the centre drill replaceable?

Yes, the set includes two centre drills. If worn, they can be replaced with a compatible 8 mm centre drill.

How do I dispose of the product properly?

Dispose of the packaging materials at local recycling facilities. For the worn-out product, contact your local refuse disposal authority for proper disposal.

Where can I get service or support?

For service in Great Britain, call 08000569216 or email [e-mail].

USER MANUAL IAN 352338 PARKSIDE

We congratulate you on the purchase of your new product. You have chosen a high quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

● Description of parts and quantities

1	Core drill (∅ 68 mm)....x 1
2	Core drill (∅ 82 mm)....x 1
3	Centre drill (∅ 8 mm)....x 2
4	SDS-plus adapter....x 1
5	Hex shank adapter....x 1

● Technical data

Core drill: ∅ 68 mm

Core drill: ∅ 82 mm

Centre drill (carbide tip): ∅ 8 x 110 mm

Adapter:

1 x SDS-plus,

1 x hex shank

[Non-Text]

Max. nominal speed: 320 min

Drilling depth: 50 mm

Assembly

■ The required shank adapter 5 is subject to the drill chuck type.
- Insert the centre drill 3 into the appropriate SDS-plus adapter 4 or hex shank adapter 5. Use the wrench to tighten the centre drill 3.
Mount the appropriate core drill - core drill ( 68 mm) 1 or core drill ( 82 mm) 2 by screwing with the appropriate SDS-plus adapter 4 or hex shank adapter 5.

● Cleaning and care

■ Clean or polish the product with a slightly moist, fluff-free cloth.

● Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

Service

GB Service Great Britain

Tel.: [phone]

E-Mail:[e-mail]

HU

MAGFÚRÓ KÉSZLET

- Bevezető