PWSZS 1 - Uncategorized PARKSIDE - Free user manual and instructions

Product Type	Angle Grinder
Brand	Parkside
Model	PWSZS 1
IAN Number	373556_2104
Power Supply	230 V ~ 50 Hz (mains)
Power Consumption	1200 W
No-Load Speed	11000 rpm
Disc Diameter	125 mm (max.)
Spindle Thread	M14
Weight	1.8 kg (approx.)
Protection Class	Class II (double insulated)
Safety Guard	Adjustable
Side Handle	Yes (can be mounted left/right)
Spindle Lock	Yes
Applications	Cutting and flexible grinding
Maintenance	Clean with dry cloth; do not oil
Included Accessories	Cutting disc, grinding disc, side handle, wrench
Safety Requirements	Wear protective goggles and gloves
Country of Origin	Germany (Conmetall Meister GmbH)
Warranty	3 years (Lidl standard)

Frequently Asked Questions - PWSZS 1 PARKSIDE

What is the correct procedure for changing the disc?

First unplug the tool. Press the spindle lock to prevent rotation. Use the supplied wrench to loosen the clamping nut. Replace the disc and retighten the nut securely. Release the spindle lock.

Can I use this angle grinder for sanding?

Yes, but only with appropriate sanding discs. The tool is designed for cutting and flexible grinding as indicated on the label. Ensure the disc speed rating matches the tool's no-load speed.

How do I clean the tool?

Always unplug before cleaning. Wipe the housing with a dry cloth. Do not use water or solvents. Never oil the internal parts as this can damage the tool.

What does the 'EXP 03/24' on the disc mean?

The 'EXP' likely stands for expiry date. For resin-bonded abrasives, the recommended shelf life is often limited. Discs older than the expiry date may lose performance and should be replaced.

Why does the tool vibrate excessively?

Excessive vibration often indicates an unbalanced or damaged disc. Inspect the disc for cracks or wear. Also check that the disc is properly mounted and the spindle is not bent.

Is the Parkside PWSZS 1 suitable for cutting metal?

Yes, with a compatible cutting disc rated for metal. Always use the guard for cutting applications and follow safe working practices.

What type of power cord does this model have?

The tool has a standard 2-pin plug (Type C/E/F) for 230 V mains. The cord is approximately 2 meters long.

Can I use accessories from other brands?

Accessories with M14 thread and 125 mm diameter are compatible. Always ensure the accessory speed rating exceeds the tool's no-load speed (11000 rpm).

How do I store the angle grinder?

Store in a dry place, away from moisture. Remove any attached disc and clean the tool. Keep the manual and accessories together.

Where can I find replacement parts?

Replacement parts are available through the manufacturer Conmetall Meister GmbH (Lidl). Use the IAN number 373556_2104 when ordering.

USER MANUAL PWSZS 1 PARKSIDE

some postmaxivan engine

[Non-Text]

The image is too blurry to recognize any text content.

- Nava obrané

[NO TEXT]

①

Davikov7a suhm-60

©

©

①

BCL

M je registrovaná ochranná

znamka spolocnosti Conmetall Meister GmbH

42349 Wuppertal